Question about 2003 Ford F150 Regular Cab

1 Answer

2003 Ford F150

How do you reset the radio?

Posted by on

  • Terry Engel May 11, 2010

    Reset the radio for what?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

Disconnect the battery terminals... wait about 10 secs and reconnect... that should do it

Posted on Jan 14, 2009

2 Suggested Answers

sscullys
  • 984 Answers

SOURCE: need to remove radio from 2003 ford f150

Remove the center oval trim panel. I usually just grab in the HVAC vents and pull, but you might want to use a plastic trim tool to work your way around the center trim bezel.

Pro Fit International has some good directions with pictures ( obviously only use them for accessing the radio, no need to continue for the vehicle specific mount )

This should be your MY and make ( right click save as ):
http://www.pro-fit-intl.com/Adobe/LC-70-98.pdf

Once the radio is exposed, you will see 2 sets of round holes on each side.
You can buy the tools, or just bend a wire coat hanger in the required shape to insert into the holes to release the radio.
c8f0fa3.gif

These are usually called Ford DIN Radio Removal Tool ( or similar ) if you want to purchase the actual tools, but I have had good luck with the coat hanger DIY tool.

Posted on Jun 23, 2010

  • 708 Answers

SOURCE: how do i remove radio from ford f150- 2003

the holes you see in the corners of the radio, approximately 1/8" diameter. You have to ahve a special tool that goes into the holes to release the radio. If you have a thin enough screwdriver you can slide it through the holes, however you may need two to get it to release.

Posted on Mar 02, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i reset the computer on a 2003 Ford F150 7700 series


Resetting a computer only resets the KAM (keep alive memory), back to factory defaults. This is what the computer learns from your driving habits. What's the problem? why do you want to reset the computer? If the check engine light is on, it will only go off if the problem was fixed. If you don't have a scanner to turn it off, it will go off after several key on and off's. Again, if the problem was fixed. Just a note, it takes 30 minutes to reset the KAM.

Feb 27, 2015 | Ford Cars & Trucks

1 Answer

Reset computer 2003 ford f150 7700 series


Not sure what you mean by reset.
You can disconnect the battery and leave the door open for a few minutes to drain the power for the radio memory.
To clear trouble codes in the computer, you would need a code reader or scanner to erase them.

Feb 27, 2015 | Ford Cars & Trucks

1 Answer

The radio from my ford f150 wont turn on


I'd start by checking the fuses and resetting the electrical system by disconnecting the battery for about 15 minutes.

Dec 17, 2014 | Ford F-150 Cars & Trucks

1 Answer

2003 ford f150 battery light comes on and battey guage pegs at high output all lights that are on get really bright then all guages reset replaced alternator 6 mos. ago


regulator out again,it is the black box on the back of the alt. just change that and clean the battery terminals well ,try again.

Oct 07, 2011 | 2003 Ford F150 Regular Cab

1 Answer

Need to know where the fuse is for the Electronic Compass Temperature Display for a Ford 2003 F150 XLT 4X4?


Chances are one or more resistors in the unit have come unsoldered from the board.

Easy fix if you have the resistors in the unit still, if not a quick trip to radio shack / local electronics store to get replacements.

This is a superDuty console that I did not too long ago.
sscullys_192.jpg

sscullys_193.jpg

F150online.com has a thread in the How To forum on the resistors for the F150 line, which is slightly different, and the resistors are a lower value than the SuperDuty version.

Aug 07, 2011 | 2003 Ford F150 Regular Cab

1 Answer

Looking for torg specs on tire lug nuts on a 15passenger van f350


Hello there
FORD TRUCK
Wheel Nut Torque Specifications
Make/Model Description Years Torque Make/Model Description Years Torque
FORD (continued)
FORD TRUCK
E250 Van 8 Lug, 9/16" 2008-88 140 -160 ft lbs
E350 Van 8 Lug, 9/16" 2008-88 140 -160 ft lbs
Escape - 2003-01 98
Excursion - 2003-01 160
Excursion - 2000 148
Expedition - 2003-01 150
Expedition 19mm Hex 2000 100
Expedition 21mm Hex 2000 150
Expedition - 1999-97 100
F Super Duty Pickup 10 Lug, 9/16" 2003-99 165
F Super Duty Pickup 10 Lug, 9/16" 1998-96 140
F150 Pickup - 2003-01 150
F150 Pickup 19mm Hex 2000 100
F150 Pickup 21mm Hex 2000 150
F150 Pickup - 1999-88 100
F250, F350 Pickup 8 Lug, 9/16" 2003-01 160
F250, F350 Pickup 8 Lug, 9/16" 2000-99 148
F250, F350 Pickup 8 Lug, 9/16" 1998-88 140
Ranger, Windstar - 2003-87 100

Feb 01, 2011 | 2008 Ford F-350

1 Answer

Need to remove radio from 2003 ford f150


Remove the center oval trim panel. I usually just grab in the HVAC vents and pull, but you might want to use a plastic trim tool to work your way around the center trim bezel.

Pro Fit International has some good directions with pictures ( obviously only use them for accessing the radio, no need to continue for the vehicle specific mount )

This should be your MY and make ( right click save as ):
http://www.pro-fit-intl.com/Adobe/LC-70-98.pdf

Once the radio is exposed, you will see 2 sets of round holes on each side.
You can buy the tools, or just bend a wire coat hanger in the required shape to insert into the holes to release the radio.
c8f0fa3.gif

These are usually called Ford DIN Radio Removal Tool ( or similar ) if you want to purchase the actual tools, but I have had good luck with the coat hanger DIY tool.

Jun 21, 2010 | 2003 Ford F150 Regular Cab

1 Answer

My 2003 Ford F150 engine misses when in gear


Your truck is not receiving enough electricity to the ignition computer check the output of your alternator under load.

Mar 17, 2010 | 2003 Ford F150 Regular Cab

1 Answer

How do i remove radio from ford f150- 2003


the holes you see in the corners of the radio, approximately 1/8" diameter. You have to ahve a special tool that goes into the holes to release the radio. If you have a thin enough screwdriver you can slide it through the holes, however you may need two to get it to release.

Mar 02, 2010 | 2003 Ford F150 Regular Cab

Not finding what you are looking for?
2003 Ford F150 Regular Cab Logo

Related Topics:

188 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...