Question about 1984 Ford F 150

1 Answer

85 f150, how do i know if differential is std or lim slip?

Truck is original equip., man. trans.(4 spd.)

Posted by on

  • warlock61
    warlock61 May 11, 2010

    what is the full question?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Welcome Back:

    Visited the website for 2 consecutive days.

  • Contributor
  • 2 Answers

Drive the truck on asphalt and turn the wheel as much as you can to either side and step a bit on the gas. If the truck is trying to jump at the rear you have a limetid slip.

Posted on Dec 12, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

96 sub leg outback, man 5 spd trans ending in BCA, what years of others will work for swap???


Sorry we have no way to look this up. Please contact a dealer parts dept.

Mar 21, 2017 | 1996 Subaru Legacy

1 Answer

I have a 85 d150, what kind of transmission does it have? its a 4 spd manually bolted to /6


if its a manual trans it is a New Process 833 if its a auto trans its a A 727

Mar 10, 2015 | Cars & Trucks

1 Answer

1965 Barracuda - 273 Commado eng with 3 spd auto trans- What type & how much trans fluid do I need?


The new MOPAR ATF+4 will work fine and is far superior to the original fluid installed in the transmission.

Sep 03, 2012 | Cars & Trucks

2 Answers

Trying to find out how much oil the Triton V-10 takes when I do my oil change? I cant seem to find it or anyone who knows


It should be listed in the owners manual, but because of different oil cooler setups you may have to do the change yourself and add oil until the correct level is established..... for the first oil change.
Most likely 7 liters,but start with 5,run the engine to fill the oil filter,let it sit for 5 mins and recheck and fill to full.
Note the amount needed for next time.

Nov 08, 2009 | 2000 Ford F250 Super Duty Crew Cabs

1 Answer

Removal of rear axil from 1999 f150 4x4 with 3.55 limited slip differential ? i removed 4 bolts at the end of the axil housing , next i drained differential lube and removed cover. i'm not sure what to...


U MUST EMOVE THE CENTER PIN BETWEEN THE SPIDER GEARS OF THE GEAR CARRIER, THEN PUSH THE AXLE IN AND REMOVE THE "C" CLIP THAT HOLDS IT INSIDE THE GEAR CARRIER

Nov 06, 2009 | 1999 Ford F150 Regular Cab

1 Answer

I need a rear drive shaft f150 117" wb man. trans. 5 spd


You have several options...find one in a scrapyard that matches, find a longer one with same diameter and joint size and have a driveshaft shop shorten it, or have one made for you at a driveshaft shop. where is the original?

Sep 10, 2009 | 1988 Ford F 150

1 Answer

What is the timing set at for a 1983 dodge 318/automatic? the sticker under the hood is gone.


Hello snowcat426a:Not knowing for sure thing like altitude or if Calif. emissions here are all the specs. 318 w/2bbl. carb. man. or auto trans. 12 @ 750 rpm. with California emissions auto or man. trans. 16@700 rpm high altitude with auto or man. trans 16@700 rpm. If equiped with a 4 bbl carb. the specs are as follows. 4 bbl.stand trans 12@750 .with automatic 16@750 rpm. With California emissions stand. transnission 16@750 rpm. Automatic specs for California emission are not available.Heavt duty specs. man trans, 8@750 rpm.auto is the same as the man. transmission specs. Should you need further help just ask. please leave rating as this helps with feedback. Thank You for using FixYa. Roger

Apr 16, 2009 | Dodge Ramcharger Cars & Trucks

1 Answer

REVERSE LIGHT DO NOT WORK


Quite frankly I'm a GM guy, but after reading your question, to me a 3-4-or 5 spd , Below that shifter is a switch to indicate when the shifter is put into the reverse gate. Test its continuity and replace. Later model std's have switches on the trans. Hope this helps

Apr 13, 2009 | Ford Mustang Cars & Trucks

1 Answer

Rear=end clunking


Too much grease? that is a load of u know what, I am aware of the slip yoke noise, there is a Technical Service Bulletin (TSB) form Ford, did he use the special Teflon Grease (a 100% must use) to lube the slip yoke? regular grease won't do. I also think you have something going on with the trans, has it ever been serviced (fluid and filter)? it should be done at least every 60,000 miles, worn out fluid can cause erratic shifting of the trans. I m a Ford dealer technician of 20+ years and a Ford certified Master Technician and ASE Master tech.

Mar 12, 2009 | 2004 Ford F150

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70347 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...