Question about Mazda MAZDA3

1 Answer

Clutch pedal comes loose on my mazda 2 hatchback 1.2, has anyone had this problem before or know how to solve

Posted by on

  • Anonymous Apr 01, 2014

    my clutch pedal is leaking brake fluid.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Had a similar problem on my 2001 Mazda Tribute. Clutch pedal lever just fell off the pivot. Mazda evidently uses a plastic retainer. I fixed it by using a steel washer and steel clip pin to retain the clutch lever on the pivot. The steel washer takes up slack on the pivot

Mazda service centers are useless, and in my opinion, rip-offs.
I will never buy another Mazda product

Posted on Dec 14, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Trouble shoot 2500masda truck that won t start after I replace clutch and slave cylinder


Did you reconnect the wires and re-position the clutch safety switch at the clutch pedal assembly? If this switch is not positioned or connected correctly it will not allow the truck to start.

Feb 25, 2015 | 1999 Mazda Pickup

1 Answer

How to adjust 95 geo tracker clutch


engaging?
you meant dis-engage im sure.
pedal up is engaged,
pedal at floor dis-engages it.
my guess, is the clutch drags unless i push the clutch pedal 100%
to the floor.
1: bad cable is 90% cause. non last this long.
2: no free play is way too loose.
3: broken lever on the pedal top. caused by #1

all fail modes covered here.
http://www.fixkick.com/tranny/clutch/clutch-on-kick.html

Apr 23, 2014 | Geo Tracker Cars & Trucks

2 Answers

Loose brake


Check the brake fluid level and make sure it is full. If the brake fluid level is good, you may need the brakes bled as there can be air in the line.

Apr 16, 2014 | 2012 Mazda 2 Sport 4dr Hatchback 1.5L...

1 Answer

Can you ajust a 1992 mazda 323 clutch ( 1.3 hatchback } If i put the car in gear and start it , it start to move on its own


If you have the clutch fully depressed and the car moves you definitely need a clutch adjustment. I'd go to www.autozone.com and register for free. Once registered you'll have access to DIY repair manuals and shop manuals. Look through these and you may find you can make the adjustment yourself.

Feb 12, 2011 | 1988 Mazda 323 Hatchback

2 Answers

How do I know when to replace the clutch on my 1999 Mazda Protege ES. Currently, it works, but I have to press the pedal all the way to the floor, with some force, to start the car. No check engine has...


whilst it works leave well alone ,when its slipping thats when you will need to replace the clutch,check the inhibitor switch on the clutch pedal though

Apr 16, 2010 | 1999 Mazda Protege

2 Answers

My 2004 stick shift Saturn Ion has a problem getting into gear. I step on the clutch and the car turns on fine, but when I step on the clutch and try to shift it inot first gear it doesn't let me. Some...


you have a clutch hydraulic problem. have the clutch master cylinder replaced and the linkage adjusted if neccessary. you will be money ahead to have them replace the slave cylinder at the same time.

Sep 23, 2009 | 2004 Saturn ION

1 Answer

2004 Mazda 3 won't start


have the safety switch check on the clutch pedal, i had a 96 mazda that did alot like you say, wasnt in the key at all just the safty switch on the pedal

May 10, 2009 | 2004 Mazda 3

2 Answers

Mazda 323f: Rain water leak into cabin on drivers side, low down.


I am fixing a similar problem on my daughter's 2002 323 Hatchback (Australian BJ model, RH drive) at the moment. Rainwater comes in from above the clutch pedal.

If you look down thru the vents in front of the windshield near the wipers, you will see a spot-welded body seam running across the bottom of that recess. This is where hers is leaking. I originally sealed it with a RTV silicone sealant which fixed the problem but after approximately 6 months it has started leaking again. I am going to remove the silicone and seal over the seam with a brushable bitumen -type sealer.

Remove windscreen wipers and the vent panel for easy access to the area.

Mar 24, 2009 | 1994 Mazda 323

1 Answer

Gears sticky when changing, sometimes crunchy even?


It looks incorrect clutch adjustment, first inside the car depress the clutch pedal by hand and see if there is a free play moor then 10 mm, if so , slacken the locknut at the cable end in engine compartment, now turn the adjustment nut until the distance from the release lever to the roller on the cable is about 3mm, tighten the locknut after adjustmen

Jan 13, 2009 | 1988 Mazda 323 Hatchback

2 Answers

Replacing hydraulic master cylinder in a 1997 mazda protege


there is nothing to loosen on the inside, just the lines and bolts on the outside. It just has a rod that fits between it and the pedal.

Dec 26, 2008 | 1997 Mazda MX-6

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

802 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

70365 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...