Question about 2005 Chrysler 300

1 Answer

Hard starting chrysler 300c

Engine cranking to hard prior to starting

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 49 Answers

Check your oil level, it may need to be changed...other then that, the rough engine starts are normal for these cars

Posted on Jun 26, 2009

6 Suggested Answers

JMMARRERO59
  • 77 Answers

SOURCE: loud tapping noise under hood of my 06 chrysler 300c

CHECK THE OIL LEVEL, IT MAY BE LOW AND WHAT YOU HEARS IS A VALVE TAPPING.

Posted on Jan 03, 2009

cecandtylers
  • 4 Answers

SOURCE: Engine overheating on 300c, fan won't turn

Is it losing coolant? If yes posible weep hole on the water pumpAre the radiator fans switching on? The constantant control module (or similar nomenclature) may not be telling them to come on.
It's a dumb question, but...are you sure that when you replaced the T-stat you put it in right side up? Spring side toward the engine and you can see the triangular shaped arch before you put the cover on. Fixed that probably a dozen or more times. Those are the inexpensive do it your self fixes.If these don't work or apply. Check and see if the cooling system holds pressure. You can get a loaner at any chain autoparts store.or take your car to the shop and pay fifty or a hundred bucks for the diagnosis.

Posted on May 02, 2009

Mechanic65
  • 142 Answers

SOURCE: my chrysler 300c will not shift from park

With out being able to see it sounds like you have a misadjusted or broken park lock cable. there is a cable that locks shifter in park unless Brake pedal is depressed. So if you are pressing the brake and can not shift into a gear. that would be the first place I would check

Posted on Oct 15, 2009

  • 106 Answers

SOURCE: HOW DO YOU CHANGE THE ENGINE COOLANT ON A 2006

There is a pet **** on the bottom of the radiator and you unscrew it and let it drain out.

Posted on Nov 18, 2009

  • 593 Answers

SOURCE: My 07 Chrysler 300c Oil light comes on,

The warrenty should cover this problem. The oil pressure is a very important part of the powertrain.
As for the engine cutoff, this may be caused by the
powertrain control module shutting down the engine
due to little or no oil pressure to prevent serious
damage. This could be as simple as a bad oil pressure sending unit. But it could also be the oil
pump. In any case I would talk to the crysler dealer
to avoid voiding the warrenty. Hope this helps.
Good luck.

Posted on Feb 04, 2010

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i fix the red lighting bolt on my 2006 chrysler 300c my car wont even turn over now i know it has coolant and oil in it


http://www.autoevolution.com/news/how-to-read-the-dashboard-lights-1370.html look for the symbol

Nov 21, 2015 | 2006 Chrysler 300C Base

1 Answer

A diagnostic check on my 2007 chrysler 300c crd revealed that the manifold pressure sensor was possibly preventing the car from starting but i dont know where in the engine this sensor is located.


Could be just a bad connection. could be Intake manifold. You need a service manual
try this http://www.manualslib.com/
I'd also google your problem, Odds, are someone else has had this problem and has a fix for it. Be sure to use the error code. in your search.

Mar 08, 2015 | 2007 Chrysler 300C

1 Answer

My 2006 300c starts sluggish and won't stay cranked; then the red gas light and the engine light stayed on. Now it won't crank at all.


Could be many things. Best would be to read codes for a hint. Stuck EGR, leaky fuel injectors, bad fuel pump (test with pressure gauge), bad coolant temp sender, bad crank sensor, bad ignition module/coil, others also.

Dec 28, 2014 | 2006 Chrysler 300

1 Answer

I cant get my car to start what do i do?


No crank? Do you have access to jumper cables? Try connecting your car to another car with a fully charged battery. Look up proper procedure with google. If it starts, try charging the battery. Let us know what happens.

Jun 20, 2014 | 2007 Chrysler 300c AWD Sedan New Cars

1 Answer

My engine starts, idles great but when in gear to go, it hesitates


Can be issue with transmission or its related components.Many car models face such problems.

For complete step by step troubleshooting,few help links are provided below.Click the link below and go through its procedure to resolve the problem:----
Engine misses and truck jumps? Hard to down shift? Issue with high gear only? http://technoanswers.blogspot.in/2012/02/engine-miss-and-truck-jumps-hard-to.html

---------
Car sitting for year, now will not crank and go in gear? http://repairhelpcenter.blogspot.com/2012/01/car-sitting-for-yearnow-will-not-crank.html

--------

2004 Peugoet: Clutch not going in gears?
http://whoisbyme.blogspot.in/2012/05/peugeot-307-clutch-will-no-go-in-gears.html

---------
Engine stumbles and shuts off in forward gear on Toyota Land Cruiser? http://schematicsdiagram.blogspot.com/2012/01/engine-stumbles-and-shuts-off-in.html

--------
Transmission problem? http://schematicsdiagram.blogspot.com/2012/01/transmission-problem.html

---------
Car engine Overheats and transmission starts slipping?

http://schematicsdiagram.blogspot.com/2011/12/car-engine-overheats-and-transmission.html

-------------
Manual Transmission Clutch System Failures?

http://repairhelpcenter.blogspot.com/2011/11/manual-transmission-clutch-system.html

-----------
Automatic transmission will not go into high gear? http://howtobyme.blogspot.com/2011/11/automatic-transmission-will-not-go-into.html

--------
Manual transmission very hard to shift from one gear to another? http://repairhelpcenter.blogspot.com/2012/01/manual-transmission-very-hard-to-shift.html

--------
Dodge manual transmission will not go in reverse gear? http://technoanswers.blogspot.in/2012/02/dodge-manual-transmission-will-not-go.html

---------
2006 Chrysler 300c: Shifter Stuck in Park? http://technoanswers.blogspot.in/2012/06/2006-chrysler-300c-shifter-stuck-in.html
---------- 1998 Ford Expedition: Will not Shift Out of Park? http://schematicsdiagram.blogspot.in/2012/06/1998-ford-expedition-will-not-shift-out.html
---------- Car will not move when in gear?

http://repairhelpcenter.blogspot.in/2012/02/car-will-not-move-when-in-gear.html

----------- Mercedes-Benz transmission sticks in first gear? http://technoanswers.blogspot.com/2012/01/mercedes-benz-transmission-sticks-in.html
---------- Mercedes Benz not engaging in first gear? http://technoanswers.blogspot.com/2012/01/mercedes-benz-not-engaging-in-first.html
--------- Chrysler PT Cruiser only goes in First gear?

http://howtobyme.blogspot.com/2011/11/chrysler-pt-cruiser-only-goes-in-first.html

-----------

Car is stuck in park and the shift will not move?
http://howtobyme.blogspot.com/2011/08/car-is-stuck-in-park-and-shift-will-not.html

------------


These details will help.Keep updated for more help.
Thanks.

Oct 16, 2012 | 1997 Honda Passport

2 Answers

My Chrysler 300 C is stalling and the engine light came on - Took my car to Autozone for a diagnostic check and the code was P0315. What does that code mean and how can I fix it.


most likely there is a problem with your crank sensor. I would inspect the crank sensor first. test the resistance on the sensor first. you could just replace the sensor or pay someone to replace it. see if the light stays off

Oct 14, 2010 | 2006 Chrysler 300

1 Answer

How do i program the garage door opener on my 2008


This issue resolves at the garage opener, itself. Later model openers use rolling code technology, which moves access code with each transmitter, on each use...

Read the directions on your opener (yes get a ladder and climb up there..) essentially the methodology is typically press button on new transmitter, and hold, then press programming button on the opener, and when the lights flash, release both, then test remote...

Read directions on your opener, as a very similar process EXCLUDES all prior transmitters...

Doc.

Sep 19, 2009 | 2007 Chrysler 300c AWD Sedan New Cars

1 Answer

Loud tapping noise under hood of my 06 chrysler 300c


CHECK THE OIL LEVEL, IT MAY BE LOW AND WHAT YOU HEARS IS A VALVE TAPPING.

Dec 10, 2008 | 2007 Chrysler 300c AWD Sedan New Cars

Not finding what you are looking for?
2005 Chrysler 300 Logo

Related Topics:

638 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

63242 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...