At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
It can be caliper is grinding against the wheel. Also can be brake pads get stuck between caliper and wheel. How long ago you have them checked. Did you hear the squiking sound while pushing the brake lately. It can be caliper is grinding against the wheel. Also can be brake pads get stuck between caliper and wheel. How long ago you have them checked. Did you hear the squiking sound while pushing the brake lately.
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It could be your brake pad has worn down and is rubbing on the metal backing, or a wheel bearing needs to be replaced. There are several components in there that could be malfunctioning---most malfunctions in the wheel/steering can be VERY dangerous...please have it checked by a professional before you drive it again.
Please have your front end, including your brakes and wheel bearings checked as soon as possible. It doesn't sound like it is safe to drive it like it is. Get professional help.
sounds like a broven cv shaft have you been hearing a clicking noise when turning this indicates a bad shaft or do you have bad motor mounts this can also cause cv failure
sounds like a possible wheel bearing issue or brake pad issue!!! i would definatly have this looked at, but in the meantime, make sure that it isnt just a backing plate contacting the rotor ...hope this was helpful!!
sounds like something was jammed, or loose. I'd recommend taking it back to where the brakes were done and have them check it out in case something they did is messed up.
A noise like that in brakes are not something to guess at, or play around with. Call the place that did the brake job, and explain to them what happened. My guess is that they will come to you, or advise you to very carefully bring it to them for a look. Might have been a stone wedged or something but don't take the chance, have it looked at, a.s.a.p. and don't drive it if you don't have to until then.
theres a ingage and disingage sencer up in there sometimes it gets stuck and it sounds bad but if u bang on it with a hammer sometimes it will let go try that
It can be caliper is grinding against the wheel. Also can be brake pads get stuck between caliper and wheel. How long ago you have them checked. Did you hear the squiking sound while pushing the brake lately.
×