Question about 1990 Toyota Camry

1 Answer

I replcaed 2 motor mounts on a 1990 camry le, as there was engine vibration. I only replaced the one on the top left of the engine and on the front, in front of the radiator. I am being told the one attached to the transmission might be the probelm, but I cannot find it. Where would I look. I have found the one on the top right of the engine attached to the fender wall. is there another?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 1,861 Answers

You need to be under the vehicle, preferably with the vehicle on a hoist. Then, you will be able to see the lower mount, pretty much in the center of the vehicle. When you see it, you are going to find that the rubber has collapsed, and the center bolt is contacting the metal that surrounds the lower mount, It is a circular type mount. Hope this helps, and Thanks for choosing FixYa to answer your question.

Posted on Dec 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is crank position sensor on a 1994 toyota 2.2liter 4cyl ?


Where is the crank position sensor on a 95 Toyota celica gt 2.2

search.aibing.cc/Where+is+the+crank+position+sensor+on+a+95+Toyota...
P1335, No Crankshaft Position Sensor Signal - Engine Running. ... 91 1991 ToyotaCelica GTS Engine Mount Right 2.2L 4 Cyl Genuine. ... 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 . ... Powered by a 2.2-liter engine, the Celica now had ST and GT trim models. ... in 1986 and a 2.0-liter ...

Where is crank position sensor on a 1994 toyota 2.2liter 4cyl ...

www.fixya.com/cars/t26080657-crank_position_sensor_1994_toyota
31 mins ago - It is not behind pully nor in dist all videos show - Toyota Cars & Trucks question. ... Change a crankshaft position sensor on a 2000 eclipse.

toyota camry crankshaft sensor - ABMforum.com

abmforum.com/toyota-camry-crankshaft-sensor.html
toyota camry crankshaft sensor 99 camry crankshaftcamshaft position codes i got a problem with my 97 ... The car 96 toyota camry 2.2 liter 4 cyl. ... 1994 toyota camry 2.2L 257k miles Symptoms Car overheats Top radiator hose hot bottom cold ...

Toyota Camry 5SFE Engine Timing Belt, Water Pump and ...

hubpages.com > Autos > Do It Yourself Auto Repair
Jul 10, 2014 - The Toyota 5SFE motor is a four-cylinder, 2.2 liter, timing-belt-driven, double ..... Remove the lower timing belt cover with the crankshaft position sensor. ..... I've never, ever replaced the harmonic balancer on a 4cyl 5SFE.

1995 Toyota Camry LE 4 cylinder - YouTube

? 2:27
https://www.youtube.com/watch?v=7TW6hlUiHWQ
Sep 6, 2011 - Uploaded by jacasan2000

Feb 03, 2016 | Toyota Cars & Trucks

2 Answers

How many mounts parts has the toyota camry 2002


Hi if by mounts you mean engine mounts there are 4 one at top left, second on right on top of transmition. And one front and rear of the center cross member. You will need 14, 17, 19. MM Sockets and spanners. Hope this helps. If not tell me which mounts. Regards Jim...

May 07, 2015 | 2002 Toyota Camry

1 Answer

1990 toyota celica gts 2200 motor vibration when idled up


You may want to check your motor mounts. If the mounts are broken or just too old they will cause the engine to have excessive vibration your notice also when shifting to drive or reverse it will feel like the vehicle jumps. replacing the mounts will help if they are damaged or may be that the vehicle needs a tune up.

Nov 07, 2013 | 1990 Toyota Celica

1 Answer

94 toyota camry vibration in steering column


Check all your engine mounts, including the dog bone at the top front of the motor. One way is to put it in neutral or park, securely chock the wheels, handbrake on, and have someone rev the motor while you look for excessive movement in the motor itself and its mountings.


Also your steering rack mounts while you are at it. This can be done by having someone firmly wind the steering wheel back and forth (ignition key in and on ACC) while you inspect the movement allowed by the rack mounts.

Feb 25, 2013 | 1990 Toyota Camry

1 Answer

Engine vibrates when car is in gear


have you done any other work, trans mount, recheck all bolts, exhaust has its flex pipe? I may be wrong but front and rear mounts are sloted are they set properly, also top side mount have two big washers or insolators on each side are there missing? this will cause a vibration. good luck

Oct 10, 2012 | 1997 Toyota Tercel

1 Answer

1995 toyota camry 2.2 engine vibration on accelleration


It does sound like engine mounts. Did you put it in neutral and rev the engine sharply up and down to see if you can spot a broken mount? The front centre lower mount on the V6 especially is hard to pinpoint, as its only sign of failure is leakage.

My upper dogbone on the V6 failed, and I found that it meant at least one other mount was also stuffed.

Dec 01, 2011 | 1995 Toyota Camry

1 Answer

Cylinder numbering for a V6 engine of a 1990 camry


For the 2.5L V6 DOHC:

Firing Order:
1-2-3-4-5-6

Cylinders:
......(back)
1........3.........5
2........4.........6
......(front)


Distributor:
......(top)
F .....6......B
R 1........5.A
O 2........4.C
N.....3.......K
T (bottom)

Feb 13, 2010 | 1990 Toyota Camry

1 Answer

2004 camry, vibration right front


If the wheel is in balance and there is no other signs of what is causing the vibration than yes that cv joint should be chk. Is the strut ok? might want to chk. that too.

May 31, 2009 | 1998 Toyota Camry

1 Answer

Excessive vibration of the steering column


Sound more like out of balance tires, or bent wheel. Unless this vibration is even in park. Then I would say something is up against a part of the steering that shouldn't be.. Or your exhaust system is bent or touching part of the undercarriage that it shouldn't be. Was the car ever wrecked?

Mar 28, 2009 | 1990 Toyota Camry

1 Answer

1990 Toyota Camry


if your engine is 4 cyls. 5s-fe and be repaired, be care to aling the crankshaft to balancer shaft in engine, this causes very vibration

Dec 18, 2008 | 1990 Toyota Camry

Not finding what you are looking for?
1990 Toyota Camry Logo

Related Topics:

172 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...