Question about 1994 Chevrolet S-10 Blazer

1 Answer

4 wheel dive wont work

1994 blazer push button lights come on when pushed and can here it ingage but front tries wont have no power 2 them can this be caused from low fluid in transfer case

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 33 Answers

Its a vacume operated cylinoid on the top of your transfer case. has three vacume lines to it. replace. could also be your vacume lines to that switch. check usally they touch the exhaust manifold and put a hole in it check that as well.

Posted on Dec 13, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 chevy blazer 4x4 not working


under the battery box is a vacumm actuator make sure there is vacumm at this actuator and it is working when you switch your 4 wd switch on the dash

Mar 24, 2013 | 1999 Chevrolet Blazer

1 Answer

1994 jimmy push button 4x4 wont engage


Could be the servo on the front diff not activating. Could be a power prob or failed unit.

Jan 15, 2013 | 1994 GMC Jimmy

1 Answer

The 4x4 in my blazer works only in 4 low sometimes the lights for the switches dont go on the 4hi doesnt work when i press on the brakes while in 4low the rear wheels keep spining and push the blazer...


Ineed to know what kind of shifting system you have. Is it a shift lever or a push button systemThe fact that it works sometimes is a good sign. So this means its not completely broken and could be a simple adjustment

Jan 20, 2011 | 1994 Chevrolet S-10 Blazer

1 Answer

When push button for 4 wheel drive the front end want ingage and the button just keeps flashing


Have you tried putting it in Neutral, then selecting 4-low. That's what we have to do on our 2000 Chevy Blazer. Same with going from 4-low to 4-high or 4-low to 2 high. It will shift from 2-high to 4 high on the fly (not in Neutral) and back.

Dec 31, 2009 | 1996 Chevrolet K1500

1 Answer

NO POWER TO FOUR WHEEL DRIVE


it could be a fuse or a relay not conducting the power to the switch have a local tech test it with a voltometer. it should be free to diagnos.

Jan 06, 2009 | 1994 Chevrolet S-10 Blazer

1 Answer

1993 4X4 BLASER 4WHEEL DRIVE


Your blazer is equipped with a shift on the fly four wheel drive. That means that at speeds less than fifteen miles per hour you can shift into or out of four wheel drive by simply pushing the four wheel high button. If you wish to shift into four wheel low. Stop, put the transmission into park or neutral, and push the four wheel low button. Same procedure for shifting back out. Never shift into or out of four wheel low while moving. And be careful in four wheel low. At full throttle your still barely moving, you don't want to blow your engine up!

Dec 31, 2008 | 1994 Chevrolet S-10 Blazer

2 Answers

I have a 1997 4x4 Blazer that wont go into 4x4.


just had simular prob.. check front diff for fluids, check actuator, and also there is a switch on the top of your transfer case . all else fails, have vehi. on jack stands (all 4 tires off the ground) start, hold brake, push button,and have someone under to watch cable ect. (""do not put in gear or give gas while doing this"")

Dec 25, 2008 | 1997 Chevrolet Blazer

1 Answer

1994 chevy s10 blazer 4x4 push button type


small sylinoid on the top of the transfer case needs replaced. easy to do. it has three vacumelines going to it just trun out and replace like a bolt.

Dec 10, 2008 | 1994 Chevrolet S-10 Blazer

Not finding what you are looking for?
1994 Chevrolet S-10 Blazer Logo

Related Topics:

115 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70374 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...