Question about 2002 Chevrolet Cavalier Coupe

2 Answers

Factory Alarm won't stop once battery is replaced

I'm in the process of replacing my battery, and the factory alarm won't shut off, even with new batteries in the remotes and car.
How do I shut it off without disconnecting the battery.

Posted by on

  • yadayada
    yadayada May 11, 2010

    The reset procedure is in the owners manual, it usually involves locking and unlocking the door with the key.

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 160 Answers

The alarm will go off because the batt has been removed replace the batt then let it go off then it will shut it self off then it will be back to normal it will take about 10 mins or so

Posted on Dec 07, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 60 Answers

Put your key in the door and turn the key to either direction!!

Posted on Dec 07, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

I replaced the battery in my 2008 Chevrolet Colorado and the factory alarm aka my horn won't stop going off. How do I reset my alarm?


pull the horn relay till its sorted
factory alarm may need a diagnostic scanner
might be a faulty module

Apr 16, 2017 | Chevrolet Cars & Trucks

1 Answer

Disable factory alarm


will the alarm stop by itself after a period of time?

I had a car once that sometimes the alarm would go off while I was driving and id have to get out, shut door, put key in door and lock and unlock the car and it would turn the alarm off, and sometimes by just starting the car will turn them off... If you cant even start the car, or anything, you will probably have to call someone....... But first I would pop the hood and disconnect the battery for.. idk 10 minutes?(certain systems in the car can actually store a temporary charge) then reconnect the battery cable and see if alarm goes off? Leave the door open and such and unlocked while doing this and possibly when you re connect the battery cable it wont be activated

Nov 01, 2013 | Nissan Pathfinder Cars & Trucks

1 Answer

Factory alarm


You have not disconnected it, even if you think you have, the car would not start. It is not that easy my friend.

Apr 27, 2013 | 1997 Volkswagen Jetta

1 Answer

Car starts and runs but alarm won't shut off


Most models with factory alarm system can be reset by locking and unlocking the driver's door with the key.

Jul 13, 2012 | Cars & Trucks

1 Answer

1995 BMW 525i Alarm is not disabling. Need to disable the factory alarm. remote does not work any more


if you could disable the factory alarm there would be no point in the factory fitting it.you need to replace the remotes....2...silly question, have you tried new batteries??

Apr 06, 2010 | BMW 525 Cars & Trucks

1 Answer

Just replaced the battery and it tripped the alarm. finally got it shut off and now it just clicks when I try to start it.


If the vehicle has a 'Factory' alarm system, try cycling the jkey in the ignition ON-OFF (not to start), 5 times. This will defeat the factory alarm. This method is used in case the remote trasmitter battery goes dead, or the transmitter is lost.

This only works on Toyota Factory security systems, however.

Oct 09, 2009 | 1998 Toyota 4Runner

1 Answer

How do i make the alarm go turn off. it is beeping and car wont start but this has never happened before


all doors hood and trunk must be closed and locked unlock drivers door with key alarm should stop (this will apply to factory alarms ). if you have an after market alarm you should use the control box. If battery is low or bad you must replace it before you can shut off the alarm

Sep 03, 2009 | 1997 Volkswagen Jetta

1 Answer

Just replaced the battery and now now alarm system


is the alarm factory? if so a call to the dealer can help

Mar 10, 2009 | 2006 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

410 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6880 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...