Question about Dodge Charger

Open Question

Im tuning up a 1966 dodge charger 383 v8 where is number 1 on the cap

Posted by on

3 Suggested Answers

emissionwiz
  • 60769 Answers

SOURCE: Tune up?

THIS ENGINE IS DIRECT, IGNITION EACH CYLINDER HAS ITS OWN COIL, NO DISTRIBUTOR.

Posted on Jun 26, 2009

  • 31 Answers

SOURCE: 85 Dodge Pickup....383 V8 can i replace the

yes but this is gonna be alot of work no matter how you do it, you will neeed to remove your oil pan, then remove rod bearing caps,and then the main bearing caps, and also remember about your flywheel that bolts to the back of the crankshaft, so you will have to remove the transmission also,

Posted on Mar 15, 2010

  • 834 Answers

SOURCE: when repacing spark plug wires

Here is a firing order diagram for your "Jetfire Rocket" engine, and you will not find this diagram out there because I just made it to help assist you using the Windows "Paint" program and a firing order diagram from an ancient 1964-1971 Chilton Manual.




996ebfb.jpg

Posted on Jul 31, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1966 chrysler 300/383 engine camshaft timing installation procedure with piston @ top dead center compression of #1 cylinder


Cam timing is set to zero on the crank gear, timing mark on gear point directly up to camshaft gear mark.

Sep 28, 2016 | Chrysler Cars & Trucks

1 Answer

Did you have the firing order diagram for 2008 dodge ram


it all depends on if you have a v6 or a v8 under the hood... v6-1,6,5,4,3,2 with number one at the front right engine cylinder and number two on the left front engine cylinder, number one on the distributor cap should be at 9 o' clock when looking at the engine from the front... v8-1,8,4,3,6,5,7,2 also number 1 cylinder at the engine's front driver's side, with number 2 cylinder on the passenger side most front cylinder, number one on the distributor cap should be at 7 o' clock when looking at the front of the engine... also both distributor shafts run clockwise, so should your firing order... or ya bang...

Oct 01, 2014 | 2008 Dodge Ram 1500 2WD

1 Answer

I keep asking the same question for a 1971 dodge 318-1 v8 engine and get every year but what im asking


The firing order for a Dodge 318cid/5.2L is 1-8-4-3-6-5-7-2 clockwise rotation.
Cylinders are numbered like this.
Pass side 2-4-6-8 front to rear.
Driver side 1-3-5-7 front to rear.
The firing order is probably forged into the intake manifold. Number one tower on the distributor cap is the one facing the number one plug or the driver-side headlight.
Distributor rotor at Number 1 plug terminal points to front intake bolt on left side of engine.

Jul 13, 2014 | 2000 Dodge Dakota Quad Cab

2 Answers

I need the firing order for the wires to the distributor cap.


there are several engines--please pick yours.

V8-318 and 360 EnginesEngine Firing Order: 1-8-4-3-6-5-7-2Distributor Rotation: Clockwise:
jturcotte_117.gif




V8-400 and 440 EnginesEngine Firing Order: 1-8-4-3-6-5-7-2Distributor Rotation: Counterclockwise:
jturcotte_118.gif


V8-383 and 44 EnginesEngine Firing Order: 1-8-4-3-6-5-7-2Distributor Rotation: Counterclockwise:
jturcotte_119.gif

Nov 08, 2010 | 1987 Dodge Ramcharger

1 Answer

I am looking for a firing order diagram for a


1966 Ford Thunderbird 6.4L 4BL 8cyl
The Firing Order is:
1-5-4-2-6-3-7-8 ---------- front
| 1 2 3 4 | of | | distributor rotates counter vehicle | 5 6 7 8 | clockwise



1966 Ford Thunderbird 6.4L 2BL 8cyl The Firing Order is:
1-5-4-2-6-3-7-8 ---------- front
| 1 2 3 4 | of | | distributor rotates counter vehicle | 5 6 7 8 | clockwise


Hope this helped (remember rated this post) Ty for using Fixya.

Apr 15, 2010 | Ford Thunderbird Cars & Trucks

1 Answer

1991 dodge ram charger 360 fireing order


For the 1991 Dodge Ram Charger 360cubic inch = 5.9L V8.

Firing Order:
1-8-4-3-6-5-7-2

Cylinders:
.........(back)
_____........._____
|...8...|........|...7...|
|...6...|........|...5...|
|...4...|........|...3...|
|...2...|........|...1...|
.........(front)

Distributor:
...........3
.....4...........6..(+)-screw
8.....................5
(+).1...........7
...........2

Apr 03, 2010 | 1991 Dodge Ramcharger

1 Answer

85 Dodge Pickup....383 V8 can i replace the crankshaft without pulling the heads?


yes but this is gonna be alot of work no matter how you do it, you will neeed to remove your oil pan, then remove rod bearing caps,and then the main bearing caps, and also remember about your flywheel that bolts to the back of the crankshaft, so you will have to remove the transmission also,

Mar 15, 2010 | 1985 Dodge Pickup 4WD

2 Answers

Need to know the firing order


For all Dodge V8 truck engines, the firing order is 1-8-4-3-6-5-7-2. For all Dodge V6 truck engines, the firing order is 1-6-5-4-3-2. For Dodge inline 6 cylinder engines, the firing order is For all Dodge 4 cylinder engines, the firing order is 1-3-4-2 All dodge distributors rotate clockwise.


look at your distributor cap while standing on the driver's side of the vehicle.
Start at number 1, which is labelled on the cap, and go
clockwise

Good Luck

Oct 28, 2009 | 1998 Dodge Dakota

2 Answers

Cylinder Layout V8 5.9 L Magnum Dodge


drivers side plugs from front of engine to rear are cylinder numbers 1...3...5...7
passenger side front to rear 2...4...6...8..
fiing order 1..8..4..3..6..5..7..2..

Sep 07, 2008 | 1999 Dodge Durango

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...