SOURCE: mazda 626 i am turning key nothing happening ,
It is possible that your starter motor is stuck. First of all you can place your vehicle in the 2nd gear and push to disengage the starter if it had the bendex stuck. there after try to start. If not you will need to remove the starter motor. carefully do remove and place it on a table . clean off all dirt, then open the motor carefully. you can even test the motor with a heavy power cord and the battery but please be very careful to hold or use a good vice grip to hold since the intial torque can make it slip from your hand. thereafter check the brushes and the bush / bearings. if damaged or wobbly change / replace. Now you can reset the starter motor and test.
I am sure it will work. Good day
114 views
Usually answered in minutes!
also it will start after like 5 or more times of turning the key
×