Question about 2001 Dodge Ram 1500 Truck 2WD

3 Answers

97 Dodge 2500 will not start

My truck ran fine one day and the next nothing motor turns over and gets spark from plugs just will not fire any ideas?

Posted by on

  • 1 more comment 
  • bbooth57 Dec 07, 2008

    has a carb,,when i pour gas down carb fires fine till gas is used up

  • bbooth57 Dec 07, 2008

    not a mechanic here so may i ask,where would fuel pump be and where would fuel filter be? Thanks

  • bbooth57 Dec 07, 2008

    any way of testing to see if fuel pump is working or just replace,,I can not thank you enough for all the help...

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Having the same problem

Posted on Feb 27, 2013

  • muzlblst
    muzlblst Feb 27, 2013

    having the same problem i read that if you dont hear the pump come on it also can be the pcm computer module

  • muzlblst
    muzlblst Feb 27, 2013

    i read that also.... if you dont hear the fuel pump come on it could be the pcm computer module

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

Have someone stand with their ear up to the filler cap (remove fuel cap) and turn the key to on position. They should be able to hear the fuel pump "humm" if it is working. It will only "humm" for a few seconds until it builds up pressure and it will stop until the engine is started. If you do not hear any noise from the fuel tank, the pump is probably out.

Posted on Jan 01, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 160 Answers

See if you have fuel getting to the injectors

Posted on Dec 07, 2008

  • 1 more comment 
  • Bryan Howald Dec 07, 2008

    your fuel pump may have gone out or something is blocking the fuel from getting to the carb

  • Bryan Howald Dec 07, 2008

    the filter could be anywhere in between the carb and fuel pump but the pump is on top of the fuel tank under the bed

  • Bryan Howald Dec 07, 2008

    to test it just disconnnect the line at the fuel filter then see if it squirts fuel out if it dose then the pump is fine

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1991 d150 318 that wont start.


Have you tried using WD-40 as a quick start, spray in to air intake at throttle body and see if it tries to fire up?

Feb 24, 2013 | 1989 Dodge D150

1 Answer

1998 dodge ram 2500 5.9 360 ci . Truck was running fine when i parked it at night, went to start it the next day and all it did was turn over but wouldnt fire, Fuel pump comes on with key in on position...


You have not run a OBD2 electronic engione control fault code test, get a code reader and do that first and don't replace anymore parts until that is done and you have the fault codes and have done the proper diagnostics for each code.

Jun 19, 2012 | 1998 Dodge Ram 2500 2WD

1 Answer

Please help i have a crossfire 150r it run fine and the next day no fire at the plug


SOUNDS LIKE IT COULD BE THE COIL PACK, I BELIEVE THAT'S WHAT GIVES THE PLUGS JUICE, HAVE NO IDEA HOW YOU COULD TELL.

Jan 15, 2012 | Cars & Trucks

1 Answer

I have an 89 dodge ramcharger 4x4 i drove it about 600 miles parked it then the next day it wouldnt start i thought it wasnt getting fuel and dumped some down the intake and it fired up after a lot of...


look at a fuse,relay for fuel pump ,and or pump maybe the cause.you might even have a broken or corroded wire.I would try the fuse or relay first

Mar 19, 2010 | 1989 Dodge Ramcharger

1 Answer

I have a 1999 dodge mach 3 conversion van, v-6 3.9. It has been stalling off and on and sometimes in the morning would not start like it was flooding up... I cleaned the IAC motor and ran fine for a week...


try replacing the camshaft positioning sensor.this little sensor can cause you more headaches then an exwife but at least the sensor is easily cured,any way start there its inexpensive and a fairly easy job.Hope this helps good luck.

Jan 02, 2010 | 1999 Dodge Ram

1 Answer

1992 toyota celice turns over but wont start


timeing belt if it turns over and nothing or timeing is off

Jul 12, 2009 | 1992 Toyota Celica

1 Answer

88 tercel no spark, cranks fine


Unless you have the equiptment to check the microprocessor, I believe that is next.Sorry 

Jan 05, 2009 | 1988 Toyota Tercel 2 Door

1 Answer

99 Dodge Ram 2500 4WD turns over, wont fire


I had a similar problem and believe it or not it was the CAT. An easy way to test for this is to remove the O2 sensor right in front of the CAT. Once you removed it, plug it back in while unscrewed from the exhaust pipe and start up the truck. If it runs fine, the CAT is your problem. This is just a guess and it would be an easy and very cheap($0) test. You did not say if the truck was diesel or gas. Mine is gas that was exhibiting the same problem as yours...good luck!

Dec 22, 2008 | 1999 Dodge Ram 2500 4WD

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

155 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...