Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

I have a 2003 chevy silverado 1500 4x4 no engine or abs light comes on but when i apply the brakes the brake pedal pulsates and pulls to the right just replaced front brakes didnt make a difference. but if i pull the abs fuse out it stops pulsating. but with no check engine or abs light coming on i dont no what it could be. could anyone help me on this?

1 Answer

Robert Larose

Cars & Trucks Expert 198 Answers
Posted on Oct 04, 2017

Robert Larose

Cars & Trucks Expert

Joined: Dec 08, 2010

Answers

198

Questions

Helped

49746

Points

627

Pulsates ARE normal for this truck it means abs is working.
if truck pulls to the right then the LEFT brake caliber is not working right check to see if rusted up... also install NEW calb. BOLTS never reuse old one if one is bent calb. wont slide correctly

5 Related Answers

Gary Queen

85 Answers
Posted on Nov 17, 2008

SOURCE: Brake pedal pulsates when appling brakes

If the new rotors were not allow to seat after replacement they will warp extremely easily. Easy to check. Remove wheel and check for trueness of rotor, a dead give away is if you see a blueish tint on the rotor.

Ray lehor

29 Answers
Posted on Jun 18, 2009

SOURCE: 2003 chev. silverado2500hd, abs goes off, pulsates when stopping

Gm has tech service bulitens on this issue.First the abs sensors can and should be removed,inspect the sensor mounting surface for rust (clean w/ sandpaper) insp the sensor (note the sensor may break w/ trying to remove so be gentlel) if all looks ok reassemble and test drive. if unwanted abs still persists both hub bearings should be replaced (call your dealer and ask if a special policy exsits for this condition) usually no abs code w/ be present Good luck Ray..

Elia Schamat

119 Answers
Posted on Jan 19, 2010

SOURCE: 2000 chevy impala 3.8 lt engine, brake pedal

it looks like you need to resurface your rotors and bleed your brake lining and adjust rear shoes if applicable and sand front pads before you install them

Anonymous

131 Answers
Posted on Feb 27, 2010

SOURCE: Bearings bad, grinding when I hit the breaks,petal pulsating

when your bearings start going bad two things happen first the ring gear that the abs reads the wheel speed moves to where it doesnt get a reading so that would probly be the abs light and second the flexing in the rotor will tend to colapse the brake piston leaving extra gap between the piston and the brake pad you might be able to confirm this by doing small short pumps and see if the pedal improves and it stops better i suggest replacing the bearings in pairs if you continue to drive the vehicle you run the chance of ruining the calipers hope this helps

Anonymous

348 Answers
Posted on Dec 23, 2010

SOURCE: Just changed brakes on gmc envoy, coming to a stop

Did you replace the rotors or at least have them machine ground to true? Out of round or warped rotors will do this. It's a pain I know but rotors should be replaced or ground to true everytime new brake pads are installed.
I hope my suggestions helps and all the luck to you.
burdfrenzy
http://stores.ebay.com/Pittsburgh-Joes-Pants-Nat

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

2005 Chevy Silverado 1500 2WD intermittent ABS light

bring back and have everything reinspected and torqued the hub houses the abs sensor can be wire damage connector damaged or incorrect connection and since it pulls right their may be install problem with that left hub

Read full answer

Sep 13, 2021 • Cars & Trucks

0helpful

1answer

Abslight stays on. How to fix? This is a2007trailblazer?

First you need to have EBCM - electronic brake control module check for DTC'S - diagnostic trouble code's . If the light is on there is a code stored . I think most part stores can do this and for free . After you find out what code is stored , looking up that code in service repair information for diagnostic trouble shooting chart would be next step . There are a few codes too.
DTC C0035 or C0040
DTC C0045 or C0050
DTC C0110
DTC C0131
DTC C0161
DTC C0186
DTC C0196
DTC C0201
DTC C0240
DTC C0241 or P0856
DTC C0244 or P1689
DTC C0245
DTC C0283
DTC C0287
DTC C0290 or C0292
DTC C0455
DTC C0550
DTC C0558

Find the code do the diagnostic's , fix the problem , wiring issue's , a sensor , bad module ,what ever it is . The light will go out then . Here is a sample of code discription .
• DTC C0035 Left Front Wheel Speed Sensor Circuit
• DTC C0040 Right Front Wheel Speed Sensor Circuit

Read full answer

Dec 30, 2016 • 2007 Chevrolet Trailblazer

0helpful

1answer

2005 Chevy impala brake pedal pulsation with brand new rotors installed

Is your ABS working properly? Under heavy braking the ABS should engage and 'pulse' the brakes on/off. It is normal to feel the brake petal flutter or pulse under your foot.

Under light braking there should be no pulsing as the ABS does not engage and you have changed the rotors and pads.

Read full answer

Nov 19, 2013 • 2005 Chevrolet Impala

0helpful

1answer

Chevy equinox 2006 Brakes Grinding, Pulsating, and Resisting

Rotors could be one problem.Check fluid level.Who did the brakes.Abs is sensor which is in hub bearings .Could be bad.

Read full answer

Apr 10, 2013 • 2006 Chevrolet Equinox

0helpful

1answer

When i apply the brake on my07 chevy silverado the brake pulsation

Front brake rotors are warped, time to do a brakes job, make sure calipers float on pins and that you replace rotors, aftermarket are cheaper than G.M. but hold up just as well, change pads and lube the slides in calipers

Read full answer

Mar 15, 2013 • 2007 Chevrolet Silverado Classic SS New...

0helpful

1answer

The brakepetal pusis bak when i stepp on the brake and wiberates. Sometimes it gets wery hard to brake.

It can be issue with master cylinder or the problem is there is still some air there in the system that has to be bleed. Or else the parts replaced are not aligned properly/.I suggest everything back.

There are few help links mentioned below to troubleshoot the issue.

Click the link below and follow its procedure: -----

All types of brake problems and repairs http://howtobyme.blogspot.com/2011/11/abs-and-service-light-comes-on.html

----------
Brake Fade Issue? http://whoisbyme.blogspot.in/2012/07/brake-fade-issue.html

-----------
Brake System Troubleshooting? http://technoanswers.blogspot.com/2011/11/brake-system-troubleshooting.html

----------
Car Brake lines have no pressure? http://schematicsdiagram.blogspot.com/2011/12/car-brake-lines-have-no-pressure.html

------------
Car Brakes Dragging? http://repairhelpcenter.blogspot.com/2011/12/car-brakes-dragging.html

-------------
Car Brakes grabbing? http://repairhelpcenter.blogspot.com/2011/12/car-brakes-grabbing.html

-----------
Car Brakes Making Noise? http://repairhelpcenter.blogspot.com/2011/12/car-brakes-making-noise.html

-------------
Car Brakes Pulling? http://repairhelpcenter.blogspot.com/2011/12/car-brakes-pulling.html

----------
Pulsating Brake Pedal? http://repairhelpcenter.blogspot.com/2011/12/pulsating-brake-pedal.html

---------
Spongy brake pedal? http://repairhelpcenter.blogspot.com/2011/12/spongy-brake-pedal.html

----------
Hard Brake Pedal? http://repairhelpcenter.blogspot.com/2011/12/hard-brake-pedal.html

------------
Fading Sinking Brake pedal?

http://whoisbyme.blogspot.in/2012/06/fading-sinking-brake-pedal.html

-------------
Feels Like Brake pedal Pulsating http://repairhelpcenter.blogspot.in/2012/06/feels-like-brake-pedal-pulsating.html

-------------
What is Brake Drum Bar? http://repairhelpcenter.blogspot.in/2012/02/what-is-brake-drum-bar.html

------------
ABS light stays on but brakes work fine?

http://howtobyme.blogspot.com/2011/11/abs-light-stays-on-but-brakes-work-fine.html

-----------
Vibrations while braking On Chevrolet Van? http://technoanswers.blogspot.in/2012/04/vibrations-while-braking-on-chevrolet.html

-----------
Dragging brakes? http://howtobyme.blogspot.in/2012/03/dragging-brakes.html

------------
Brake pedal stuck? http://howtobyme.blogspot.in/2012/03/brake-pedal-stuck.html

-----------
After replacing brake rotors and pads, brake pedal remains on floor? http://technoanswers.blogspot.in/2012/02/after-replacing-brake-rotors-and-pads.html

----------
How to replace Brake Power Booster? http://repairhelpcenter.blogspot.in/2012/02/how-to-replace-brake-power-booster.html

-----------
1997 Chevy Tahoe Brake lights not working? http://technoanswers.blogspot.in/2012/02/1997-chevy-tahoe-brake-lights-not.html

------------
How to service Drum brakes? http://repairhelpcenter.blogspot.in/2012/02/how-to-service-drum-brakes.html

-----------
What type of problems usually noticed on Drum brakes? http://repairhelpcenter.blogspot.in/2012/02/what-type-of-problems-usually-noticed.html

----------
How to test Drum Brakes? http://repairhelpcenter.blogspot.in/2012/02/how-to-test-drum-brakes.html

---------
Brake Bleeder Screw Function? http://repairhelpcenter.blogspot.in/2012/02/brake-bleeder-screw-function.html

---------
Toyota Tundra: Parts diagram to replace Brake Drums?

http://technoanswers.blogspot.in/2012/06/toyota-tundra-parts-diagram-to-replace.html
---------- Squeak and grinding sound is heard when brakes are applied?

http://technoanswers.blogspot.in/2012/02/squeak-and-grinding-sound-is-heard-when.html

------------

Brake Pads Inspection on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/brake-pads-inspection-on-acura-integra.html

-------------

How to remove Brake Pads on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-brake-pads-on-acura.html

--------------

How to remove Brake Disc Rotor on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-brake-disc-rotor-on-acura.html

------------

Brake Caliper OVERHAUL on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/brake-caliper-overhaul-on-acura-integra.html

------------

How to remove Brake Caliper on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-brake-caliper-on-acura.html

------------

How to remove Parking Brake shoes on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-parking-brake-shoes-on.html

-----------

How to remove Parking Brake Cable on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-parking-brake-cable-on.html

-------------
Brake pedal is pulsating and vibrating? http://repairhelpcenter.blogspot.com/2012/01/brake-pedal-is-pulsating-and-vibrating.html

----------
2002 Ford Windstar: Brake Warning Light ON dash?

http://schematicsdiagram.blogspot.in/2012/06/2002-ford-windstar-brake-warning-light.html

-----------

These details will help.

Thanks.

Read full answer

Nov 26, 2012 • Toyota Cars & Trucks

1helpful

1answer

REPLACED FAULTY BOOSTER OVERHAULED MASTER CYLINDER AFTER 4 TO 5 BRAKES FRONT BRAKES START TO BUILD UP PRESSURE AND BIND

CAR BRAKE PROBLEMS

It can be issue with master cylinder or the problem is there is still some air there in the system,that has to be bleed.Or else the parts replaced are not aligned properly/.I suggest everything back.

There are few help links mentioned below to troubleshoot the issue.

Click the link below and follow its procedure:-----

All types of brake problems and repairs http://howtobyme.blogspot.com/2011/11/abs-and-service-light-comes-on.html

----------
Brake Fade Issue? http://whoisbyme.blogspot.in/2012/07/brake-fade-issue.html

-----------
Brake System Troubleshooting? http://technoanswers.blogspot.com/2011/11/brake-system-troubleshooting.html

----------
Car Brake lines have no pressure? http://schematicsdiagram.blogspot.com/2011/12/car-brake-lines-have-no-pressure.html

------------
Car Brakes Dragging? http://repairhelpcenter.blogspot.com/2011/12/car-brakes-dragging.html

-------------
Car Brakes grabbing? http://repairhelpcenter.blogspot.com/2011/12/car-brakes-grabbing.html

-----------
Car Brakes Making Noise? http://repairhelpcenter.blogspot.com/2011/12/car-brakes-making-noise.html

-------------
Car Brakes Pulling? http://repairhelpcenter.blogspot.com/2011/12/car-brakes-pulling.html

----------
Pulsating Brake Pedal? http://repairhelpcenter.blogspot.com/2011/12/pulsating-brake-pedal.html

---------
Spongy brake pedal? http://repairhelpcenter.blogspot.com/2011/12/spongy-brake-pedal.html

----------
Hard Brake Pedal? http://repairhelpcenter.blogspot.com/2011/12/hard-brake-pedal.html

------------
Fading Sinking Brake pedal?

http://whoisbyme.blogspot.in/2012/06/fading-sinking-brake-pedal.html

-------------
Feels Like Brake pedal Pulsating http://repairhelpcenter.blogspot.in/2012/06/feels-like-brake-pedal-pulsating.html

-------------
What is Brake Drum Bar? http://repairhelpcenter.blogspot.in/2012/02/what-is-brake-drum-bar.html

------------
ABS light stays on but brakes work fine?

http://howtobyme.blogspot.com/2011/11/abs-light-stays-on-but-brakes-work-fine.html

-----------
Vibrations while braking On Chevrolet Van? http://technoanswers.blogspot.in/2012/04/vibrations-while-braking-on-chevrolet.html

-----------
Dragging brakes? http://howtobyme.blogspot.in/2012/03/dragging-brakes.html

------------
Brake pedal stuck? http://howtobyme.blogspot.in/2012/03/brake-pedal-stuck.html

-----------
After replacing brake rotors and pads, brake pedal remains on floor? http://technoanswers.blogspot.in/2012/02/after-replacing-brake-rotors-and-pads.html

----------
How to replace Brake Power Booster? http://repairhelpcenter.blogspot.in/2012/02/how-to-replace-brake-power-booster.html

-----------
1997 Chevy Tahoe Brake lights not working? http://technoanswers.blogspot.in/2012/02/1997-chevy-tahoe-brake-lights-not.html

------------
How to service Drum brakes? http://repairhelpcenter.blogspot.in/2012/02/how-to-service-drum-brakes.html

-----------
What type of problems usually noticed on Drum brakes? http://repairhelpcenter.blogspot.in/2012/02/what-type-of-problems-usually-noticed.html

----------
How to test Drum Brakes? http://repairhelpcenter.blogspot.in/2012/02/how-to-test-drum-brakes.html

---------
Brake Bleeder Screw Function? http://repairhelpcenter.blogspot.in/2012/02/brake-bleeder-screw-function.html

---------
Toyota Tundra: Parts diagram to replace Brake Drums?

http://technoanswers.blogspot.in/2012/06/toyota-tundra-parts-diagram-to-replace.html
---------- Squeak and grinding sound is heard when brakes are applied?

http://technoanswers.blogspot.in/2012/02/squeak-and-grinding-sound-is-heard-when.html

------------

Brake Pads Inspection on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/brake-pads-inspection-on-acura-integra.html

-------------

How to remove Brake Pads on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-brake-pads-on-acura.html

--------------

How to remove Brake Disc Rotor on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-brake-disc-rotor-on-acura.html

------------

Brake Caliper OVERHAUL on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/brake-caliper-overhaul-on-acura-integra.html

------------

How to remove Brake Caliper on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-brake-caliper-on-acura.html

------------

How to remove Parking Brake shoes on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-parking-brake-shoes-on.html

-----------

How to remove Parking Brake Cable on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-parking-brake-cable-on.html

-------------
Brake pedal is pulsating and vibrating? http://repairhelpcenter.blogspot.com/2012/01/brake-pedal-is-pulsating-and-vibrating.html

----------
2002 Ford Windstar: Brake Warning Light ON dash?

http://schematicsdiagram.blogspot.in/2012/06/2002-ford-windstar-brake-warning-light.html

-----------

These details will help.

Thanks.

Read full answer

Nov 23, 2012 • Cars & Trucks

0helpful

2answers

Why is brake warning light is on

It can be issue with master cylinder or the problem is there is still some air there in the system,that has to be bleed.Or else the parts replaced are not aligned properly/.I suggest everything back.

There are few help links mentioned below to troubleshoot the issue.

Click the link below and follow its procedure:-----

2002 Ford Windstar: Brake Warning Light ON dash?

http://schematicsdiagram.blogspot.in/2012/06/2002-ford-windstar-brake-warning-light.html

-----------

Battery and brake Warning lights on Dash
http://alltypesofpartsreplacing.blogspot.com/2012/10/battery-and-brake-warning-lights-on-dash.html
-----------
ABS & Brake warning lights remains steady on dash? http://schematicsdiagram.blogspot.com/2011/12/abs-brake-warning-lights-remains-steady.html
------------

Brake warning light comes on and car will not start intermittently? http://repairhelpcenter.blogspot.com/2011/12/brake-warning-light-comes-on-and-car.html
------------ When the car stops, abs pump turns ON? http://howtobyme.blogspot.com/2011/12/when-car-stopsabs-pump-turns-on.html
----------- Where is Power Brake Booster located on 1995 Lincoln Town Car? http://howtobyme.blogspot.com/2011/12/where-is-power-brake-booster-located-on.html
----------- Sometimes ABS light comes on while Driving?

http://howtobyme.blogspot.com/2011/12/sometimes-abs-light-comes-on-while.html
-----------

All types of brake problems and repairs http://howtobyme.blogspot.com/2011/11/abs-and-service-light-comes-on.html

----------
Brake Fade Issue? http://whoisbyme.blogspot.in/2012/07/brake-fade-issue.html

-----------
Brake System Troubleshooting? http://technoanswers.blogspot.com/2011/11/brake-system-troubleshooting.html

----------
Car Brake lines have no pressure? http://schematicsdiagram.blogspot.com/2011/12/car-brake-lines-have-no-pressure.html