Question about 2007 Dodge Ram 1500 Quad Cab Sport

1 Answer

Procedure for changing the front and rear axel oil

What is the procedure for changing the front and rear axel oil for a 2007 Dodge Ram 1500 4x4? Also, what replacement oil is recommended?

Posted by on

  • Anonymous Mar 25, 2014

    lubricant front axel shibaura
    1341

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 194 Answers

This is rather simple pull the drain plugs and refill till it starts to run out of top plug besure to use proper gear oli for your vehicel

Posted on Dec 07, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whats a PO750 code on a 2007 dodge ram 1500 4.7


Hi there:DTC P0750 - Shift Solenoid A Malfunction

Here you can find diagnostic procedure: DTC P0750 Fauls Code
Hope this helps.

Mar 12, 2012 | 2007 Dodge Ram 1500 Quad Cab Sport

1 Answer

I need to know how to remove a rear axel on 2007 dodge ram


its pretty simple

Remove the drive shaft

remove the tires

remove the calipers and rotors if rear disk and then remove the ebrake shoes/cables.

If rear drums remove the drums. remove the shoes and the e brake cable. remove the backing plate bolts. remove backing plate from axle and support with a piece of wire from the frame being careful not to distort the brake line.

remove the bolt that holds the breather an brake junction to the axle.

remove the break line from the tabs (may not have them).

remove the shocks from the axle.

remove the u-bolts from the axle.

pull the axle out.

Sep 28, 2011 | 2007 Dodge Ram 1500 Quad Cab Sport

1 Answer

How do you change a front axle u-joint on a 2006 3500 dodge ram


you will have to change both sides to start with. I'm doing this on a 1996 ram 1500. first, put the truck on 2 wheel drive or neutral for traction, raise vehicle, i got a lift it's easy, remove both wheels, calipers and rotors. unlock the driveshaft nut (cotter pin) and unbolt that nut. on the inside of the hub, first mark the relation on one side between the yoke and the shaft, then, there is 3 bolts holding the hub in, remove them. next, more cotter pins, upper and lower ball joint and tie-rod end need to come out, so, unscew the tie-rod end first and seperate it with ball joint seperator. do the same for the upper and lower ball joints. seperate the spindle and the axel should come out. the rest is standard procedure to change a ball joint.
let me know if it's enough info or if you want more please.

Jan 04, 2011 | 2008 Dodge Ram Pickup 3500

1 Answer

Oil indicator light is on and not losing oil not getting hot and presuure guage is on 0


you need to change the engine oil and reset the oil life index,procedure should be in owners manual

Dec 25, 2010 | 1997 Dodge Ram

1 Answer

Differential oil leak. oil showing near driveshaft, and both axel areas. i understand that the diff seal is by the driveshaft. any ideas on why thee would be oil on the areas of the diff housing by...


The rear axle seals are leaking too,it's been my experience with Dodge 2500's,all 3 seals leaking is usually a indication that there are bearings going south!

Mar 10, 2010 | Dodge Ram 2500 Cars & Trucks

1 Answer

Change differential fluid


pull the gear cover off the front and on the rear probably the same procedure if the is not a drain plug

Jan 05, 2010 | 2008 Dodge Ram Pickup 3500

1 Answer

Torque procedure on american axle 11.5


Tight tight rtight tight and so on alternating criscross pattern

Sep 29, 2009 | 2007 Dodge Ram 3500 Quad Cab Laramie

2 Answers

2000 dodge ram 1500 front end clicks in 2wd and bucks in 4wd


Sounds like either your hub assembly or front axel universals.

Mar 21, 2009 | 2000 Dodge Ram 1500 Truck

1 Answer

Left rear axel seal on2001 dodge dsl 3500 . 4x4 leaking


if its in the right front axle theres a small bearing in the axle housing tube that is hard to see that keeps the axle from moving around

Mar 14, 2009 | 2007 Dodge Ram 1500 Quad Cab Sport

Not finding what you are looking for?
2007 Dodge Ram 1500 Quad Cab Sport Logo

Related Topics:

261 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...