Question about 2000 Toyota Sienna

1 Answer

Toyota sienna 2000 mirror fuse, wchich one is

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 1,861 Answers

The mirrors are controlled by the 15 amp "CIG" fuse.

Posted on Dec 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 toyota Sienna side view mirror broken/loose, folds back at speeds greater than about 40mph, replacement or repair instructions would be greatly appreciated.


the spring is probably unhooked or broken. take the panel on the inside of the door right behind the mirror off and there is probably two bolts after that its pretty much self explainatory

Aug 31, 2012 | 2000 Toyota Sienna

1 Answer

Blinker fuse location for 2000 toyota sienna. blinker doesn't work


The flasher relay is underneth the dash to the left of the steering wheel. You can see it if you use a mirror.

May 28, 2010 | 2000 Toyota Sienna

2 Answers

2001 toyota sienna power mirror/ clock not working? icouldn't find the fuse. Please help me


There is an interior fuse panel located on the left side of the steering column, behind the "change compartment". You just pull it out and you will see a fuse diagram on the back. The fuse you want to replace is the fuse for the cigarette lighter, it is a 15 amp fuse and is located on the bottom right.

As far as I can tell, the owner manual makes no mention of this interior fuse panel and furthermore the actual fuse for the cigarrette lighter doesn't mention that it is connected to the clock and the power mirror.

May 20, 2010 | 2000 Toyota Sienna

1 Answer

Dome light fuse keeps blowing


The wires that go to the vanity visor lights are probably your problem from what you are describing. Isolate those wires or disconnect the connectors. The dome light feeds the lights in the mirrors.

Dec 21, 2009 | 2000 Toyota Sienna

1 Answer

2000 Toyota Sienna driver's mirror loose and flapping.


Remove inner door panel, check nuts, tighten or replace if needed.

Jun 27, 2009 | 2000 Toyota Sienna

1 Answer

Sienna Fuse identification


look under the dash on the drivers side to find the fuse box find the fuse labled CIG it is a 15 amp blue fuse

May 29, 2009 | 2000 Toyota Sienna

1 Answer

1999 Toyota Sienna Problem


it seems to be a blown fuse do to the numerous problems.. 

Sep 12, 2008 | 1999 Toyota Sienna

3 Answers

Replacing RH Side view mirror on a 2006 Toyota Sienna


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Jul 29, 2008 | 2006 Toyota Sienna

Not finding what you are looking for?
2000 Toyota Sienna Logo

Related Topics:

393 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...