Question about 1999 Nissan Quest

1 Answer

1999 nissan quest

Where do i locate the point of the timing belt for a nissan quest 1999

Posted by on

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Rigoe the points for the timing belt are usually located on the sprokets in conection with marks or dots on the engine block some where around the sprockets that hold the timing belt. Remenber to bring the piston number one to TDC (top dead center), this means you have to locate the piston number one, take the spark plug out and turn the cranshaft (the one with the pulley) by hand until the piston is all the way up. On the distributor the rotor should point to the spark-plug wire number one (you can make a mark outside of the distributor cap where the number one spark-plug wire is pointing so when you take the cap off you can see if the rotor is pointing the same direction). With the timing belt cover off you are going to be able to aling all this points at the exact locacation all together. So we have: Piston number one at TDC, The rotor(enside the distributor cap) pointing to the number one spark-plug wire, and the mark of the sprockets pointing the marks of the engine block( litle dot or dash). If you get all this right you are have done a good job and ready to make a trip you can get all this just by turning the cranshaft by hand with a rachet and a big socket. God bless you.

Posted on Apr 11, 2009

2 Suggested Answers

  • 12 Answers

SOURCE: Does the nissan quest 1999 timing belt needs to be

The Quest has a non interference engine meaning that should the belt break the engine would just die without breaking anything. Nissan recommends 105K for changing but that depends on the way the vehicle was driven (driving habits), road conditions etc. If driving on roads for e.g. that are hilly, it labors the engine more thus shortens the lifespan of the belt according to mfg.

Posted on Mar 18, 2010

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replacing the timing belt on a 2000 Nissan Quest/ Instructions Needed


Charles,your engine is a interference one,and you may have damaged it or ruined it,here's a link on replacing the belt. Damage to the valves and/or pistons may resulted from belt breakage.

Nov 20, 2013 | 2000 Nissan Quest

1 Answer

My nissan quest is crank no spark i put new timing belt new spark pluck new crankshaft sensor n new distributer still no start


putting on a timing belt for your nissan is a delicate process, it requires a lot of experience, attention to detail, and precise installment. its not like changing a filter. unless you are an experienced tech, or had one do the proceedure, avoid it. the details like setting #1 piston to top dead center, before removing all the items to get to the belt. and positioning the cam gears, etc., etc., etc.,.............thats most likely what your problem could be, just sayin.........................talking from experience !!!!!!!!!!!!1

Mar 03, 2013 | 1999 Nissan Quest

1 Answer

My 99 nissan quest will not get spark it died while idling in driveway timing belt is still working


change your coils or coil if not the issue your crankshaft postion sensor or camshaft postion sensor are faulty


if it helps please leave me thumbs up review

May 08, 2011 | 1999 Nissan Quest

1 Answer

The distributor on my husbands 99 Nissan Quest stopped turning. I'm guessing that it is broken. Is this expensive to replace


most likely timing belt failed.this turns camshafts which in turn rotate distributor.fotunately for you ford insisted nissan make this a non interference engine during their joint venture with mercury villager.so no internal damage should have occurred.im guessing about 700.00 to replace timing belt,water pump and drive belts.

Jan 16, 2011 | 1999 Nissan Quest

4 Answers

Does the nissan quest 1999 timing belt needs to be


The Quest has a non interference engine meaning that should the belt break the engine would just die without breaking anything. Nissan recommends 105K for changing but that depends on the way the vehicle was driven (driving habits), road conditions etc. If driving on roads for e.g. that are hilly, it labors the engine more thus shortens the lifespan of the belt according to mfg.

Dec 03, 2009 | 1999 Nissan Quest

1 Answer

How to change 1999 nussan quest ac belt


http://groups.yahoo.com/group/villagerquest/

Belt —A/C Removal
  1. Remove the A/C compressor drive belt.
    1. Loosen the A/C compressor drive belt pulley tensioner bolt.
    1. Loosen the A/C compressor drive belt idler pulley adjustment bolt.
40f6b66.gifInstallation
  1. sxv~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Incorrect drive belt installation will cause drive belt failure.
    NOTE: Inspect the pulleys for warping or abnormal wear.
    NOTE: Make sure drive belt is properly installed on each pulley.
    To install, reverse the removal procedure.
    • Adjust the A/C compressor drive belt. For additional information, refer to Belt Adjustment—A/C .

Aug 10, 2009 | 1995 Nissan Quest

1 Answer

Replacing ignition distributor on 99 mecury villager and have found top dead on cilander #1 where does the rotor point


Well before you took the old distributor off take notice of rotor button location.If you already removed the old distributor locate number one cylinder and point rotor button to that cylinder. it might have to be done a couple of times to get it just right.

Jul 18, 2009 | 1999 Nissan Quest

Not finding what you are looking for?
1999 Nissan Quest Logo

380 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...