Question about 1996 Chrysler Town & Country

1 Answer

1996 CHRYSLER TOWN & COUNTRY TRANS AXLE PROBLEM.

MY 1996 TOWN & COUNTRY VAN IS HAVING SHIFTING PROBLEMS! AND THE ENGINE LIGHT WON'T GO OFF! I BOUGHT A CODE SCANNER/READER BUT STILL CANNOT GET THIS VAN OUT OF "LIMP MODE" OR CLEAR THE CODES. CAN YOU PLEASE ADVISE?

Posted by on

  • 4 more comments 
  • Rabindra Robinson May 11, 2010

    what code did yu derive from your decoder could you please tell me that

  • Anonymous Mar 13, 2014

    it started by going in to limp mode

  • Anonymous Mar 16, 2014

    service engine lighy is on how do i fix it 97 chrysler town & country van

  • Anonymous Mar 18, 2014

    that is the code i am getting tranny shifts hard and some when you brake hard engine starts to die and sometimes comes out of gear but when you give it gas it goes back into gear this is for 1998 town and country

  • Anonymous Mar 20, 2014

    engine oil ran dangerously low. filled oil. van will turn over, sputter like it wants to start and then nothing. have cleared check engine and oil lights. battery is charged, starter will engage but seems like something electronic is preventing the engine turn over

  • Anonymous Mar 27, 2014

    the radiator is leaking. Having to add coolant after driving for any distance longer than 10 miles

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had same toublre on 96 plymouth output speed senor my wont shift out of second

Posted on Jan 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1996 Chrysler 3.8. town and country mini van


The oil pressure light probably came on when the engine stopped.
You would have lost your power accessories then too.
Someone will need to figure out if you have lost fuel to the injectors and/or spark to the plugs to know where to look for the problem.

Jul 23, 2012 | 1996 Chrysler Town & Country

1 Answer

My 1999 chyrsler town and country mini van 3.3 lt engine is having problems. This Morning my speedometer quit working and my car is not shifting gears. It wont switch gears properely and the service engine...


The output speed sensor may have come unplugged or got damaged. It is at the front of trans close to the drivers side tire. If you lay on the ground in front of the tire you should be able to see it.

Jan 20, 2011 | 1999 Chrysler Town & Country

2 Answers

Trans slipping


Yes, they will swap over, but you may have trouble with the higher torque output of the 3.8 if you like to "get on it" more than the average van owner.

Jul 22, 2010 | 1996 Chrysler Town & Country

1 Answer

Could a bad 02 sensor affect shifting in my 1996 chrysler town & country? When I started having problems I put a scanner on it, and the only code it put out was for a oxygen sensor. Could the 02 sensor...


Yes, the car will probably shift harder (if it has an automatic transmission) and it won't shift correctly when you try to accelerate at speeds over 30 MPH (it will downshift too many gears).

Nov 01, 2009 | 1996 Chrysler Town & Country

1 Answer

Van is not shifting out of 2nd gear?


I am going to assume you have the overdrive trans. This trans defualts to second gear if the trans computer detects there is a problem.

This problem can be anything from internal falure to sensors that are bad. You have to scan it for trans codes. It could be a simple input or output speed sensor. that is the easiest. however you have to start with the scan.

Most Advance and Autozone parts stores will scan for free.

Hope this helps and hope it is not internal.

Oct 06, 2009 | 1996 Chrysler Town & Country

1 Answer

02 Chrysler Town and Country Service Engine Light


If your torque converter is starting to come apart it could cause severe damage to the rest of the transmission. If it is affordable I would try a second opinion though.

Apr 14, 2009 | 2002 Chrysler Town & Country

1 Answer

01 Chrysler T&C Transmission Problem 3.3L engine


try having the transmission module re-flashed.

Mar 14, 2009 | 2001 Chrysler Town & Country

2 Answers

Tranny making wierd noise


The trans needs a new pump and torque converter.

Feb 26, 2009 | 1997 Chrysler Town & Country

1 Answer

Shifting Problems


input /output speed sensors or the shift solenoid pack on the transmission are bad do a search on ebay for these you can pick them up as a kit for about $150 please rate -jeff

Sep 02, 2008 | 1996 Chrysler Town & Country

Not finding what you are looking for?
1996 Chrysler Town & Country Logo

535 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...