Question about 2005 Dodge Stratus

1 Answer

Where is the camshaft position sensor located?

It is for a 2005 dodge stratus

Posted by on

  • nuttynita62 Dec 06, 2008

    is it a pain to replace the camshaft posistion sensor

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 302 Answers

Its on the bottom of the engine block, there is a heat shield covering it, thats why you can't find it, its around the intake manifold

Posted on Dec 06, 2008

  • Big Poppa Marv
    Big Poppa Marv Dec 06, 2008

    you just have to make sure you don't force the sensor in and damage the gasket surrounding the the sensor opening, its just gettin to it, thats the pain, and with the car being so compact, u aren't gonna have much room to work in. gettin to it is the pain for something so simple

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Diagram of where a camshaft sensor is on a dodge stratus 2.4L 4 cylinder


2003 model
not confirmed
crank angle sensor might be near the stater motor on the block


26233366-qzmmc3ihqjw1j4mumdlnccct-4-0.gif

26233366-qzmmc3ihqjw1j4mumdlnccct-4-2.gif

Jul 07, 2016 | Dodge Cars & Trucks

1 Answer

Where is the camshaft sensor located on a 2005 Dodge Stratus 2.4L


on the end of the cylinder head toward the drivers side of the car. it runs off the front or intake camshaft. right where the valve cover . meets the head. its kind of round and is held on by two bolts. its easy to change

Oct 04, 2014 | 2005 Dodge Stratus

1 Answer

Where is the cam sensor relay located on a 2004 Dodge Stratus?


If you mean the camshaft position sensor it is on the right hand side of the engine up near the valve cover on the 2.4L 4cylinder engine.

Jan 23, 2011 | 2004 Dodge Stratus

4 Answers

Where is the camshaft position sensor located on a 2004 dodge stratus 4 cyl 2.4L engine


the camshaft sensor is mounted on the camshaft housing located on the end of the cylinder head.

Jul 08, 2009 | 2004 Dodge Stratus

1 Answer

I have a 2005 Dodge Stratus with a bad camshaft position sensor. Are they easy to replace or will I need to have it done?


For a 2.7 liter six cylinder engine, the camshaft position sensor is located in the front or on the right side of the front engine head. Be sure the engine is cool before you start to remove it. It's fairly easy to change, just in an awkward spot to get to. You can see the connector on the front of the head just right under the top radiator hose. The sensor is held in with a 13mm bolt that has a wiring support tab attached to the top. Remove the wire support tab and then remove the bolt. After the bolt is out, just pull the sensor out with you fingers. A new sensor from the dealer will run around $55.00.  Good luck and hope this helps. keep me posted, be glad to help.

Jun 22, 2009 | 2005 Dodge Stratus

1 Answer

Cant find cam sensor in 2004 dodge stratus r/t


2.0L 2.4L it is on The BACK OF the Cylinder Head REMOVAL
The camshaft position sensor is mounted to the rear of the cylinder head.

  1. Remove the negative battery cable.
  2. Disconnect the PCV hose and reposition.
    1. Disconnect electrical connectors from the camshaft position sensor.
    2. Remove camshaft position sensor mounting screws. Remove sensor.
      1. Loosen screw attaching target magnet to rear of camshaft and remove magnet.
      INSTALLATION
      The target magnet has locating dowels that fit into machined locating holes in the end of the camshaft.

      1. Install target magnet in end of camshaft. Tighten mounting screw to 3 Nm (30 in. lbs.) torque. Over torqueing could cause cracks in magnet. If magnet cracks replace it.
      2. Install camshaft position sensor. Tighten sensor mounting screws to 12.9 Nm (115 in. lbs.) torque.
      3. Carefully attach electrical connector to camshaft position sensor. Installation at an angle may damage the sensor pins.
      4. Connect the PCV Valve hose.
      5. Connect the negative battery cable.
2.7L V6
REMOVAL
The camshaft position sensor is mounted in the front of the head.
  1. Disconnect electrical connector from sensor.
  2. Remove camshaft position sensor screw.
CAM Sensor Location 2.7L
  1. Without pulling on the connector, pull the sensor out of the chain case cover.
INSTALLATION
The camshaft position sensor is mounted in the front of the head.

  1. Install sensor in the chain case cover and push sensor in until contact is made with the boss on the head. While holding the sensor in this position,install and tighten the retaining bolt to 12 Nm (105 in. lbs.) torque.
  2. Attach electrical connector to sensor.

Feb 12, 2009 | 2004 Dodge Stratus

1 Answer

Camshaft position sensor


its fairly easy to do, take 30 minutes the most, so definitely, you can do it yourself. just gettin to it, is the pain, but you can definitely do it yourself

Dec 06, 2008 | 2005 Dodge Stratus

Not finding what you are looking for?
2005 Dodge Stratus Logo

Related Topics:

509 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6869 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...