Question about 2000 Mazda MPV

3 Answers

Program remote control for mazda mpv 2002

Please help how can i program remote control for mazda mpv 2002
it's a car with dual power door

Posted by on

  • Anonymous Mar 12, 2014

    My Mazda MPV 2002 stopped acceleration beyond gear one. Also it goes off randomly when I accelerate or step on the brakes.

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

Courtesy of: forums.mazdaworld.org

Try this, it works on several 2002 models:


Step 1: Open drivers door and leave open.

Step 2: Lock and unlock the drivers door using the power door lock switch on the door.

Step 3: Insert key into the ignition.

Step 4: Turn key to on position and return to off position. (IMPORTANT - use ON position NOT ACC position). Do this 3 times within 10 seconds. Leave key in the ignition.

Step 5: Open and close the drivers door 3 times. (Door should be left open after this step).

Step 6: ECU should respond by locking and unlocking the doors.

Step 7: Press any button on remote #1. ECU responds by locking and unlocking the car doors.

Step 8: Press any button on remote #2 (etc.) Each time the ECU will respond by locking & unlocking the doors.

Step 9: Remove the key from the ignition and the ECU will respond a final time with a series of door locks and unlocks. You're done

Posted on Feb 21, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi I have a 2002 Mazda MPV mini van my remote alarm use to work but they stop working I did the and the alarm remote doesn't work still I replace battery still don't work

Posted on Mar 15, 2013

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi im having a problem with my alarm when i bought it only worked with using the key but i had to remote, i replaced the battery and followed the steps shown here and still not working any answers??

Posted on Jun 26, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can I use a 4button keyless remote to replace a 3 button keyless remote


Hi,
Is the 3-button remote from Mazda too? If it is and it's from the same year range as your MPV it may work. In other words, many car makers used the same type of keyless remotes on all their vehicles in a given year range. But if the 3-button is much newer or older you're probably out of luck. You can search on Ebay to see what types of remotes were sold for your year car.

If this is NOT a Mazda remote and neither was the 4 button they may use a different frequency (think 'radio station') and won't 'talk' to the car's keyless remote compuer.

TD

Oct 29, 2014 | 2003 Mazda MPV

1 Answer

MAZDA MPV 2002 LJ102 - Drivers side door lock won't latch - small clip inside has broken - realise it is not separate lock and actuator but one sealed unit - need to source one ASAP - can you help??


The only place you are going to find those parts is at the dealer or a salvage yard. The dealer may even be able to get just the clip, but sometimes (especially with Mazda) you will have to buy the complete door latch assembly.

Feb 08, 2011 | 2002 Mazda MPV

1 Answer

96 mazda mpv minivan 165k mi. Ran fine until one day just died.Had towed home.3 mech.tried diagnose gave up wouldn't start-turns over-no start. Last mech.replaced timing belt&idle pulley. Still no...


I was browsing unsolved problems. If you still have the problem, I'll try to help you. But it's going to be awhile trying to communicate back and forth. First...Check the engine for spark. Take off a plug wire and stick a screw driver in the wire end and place the metal part of the screw driver next to something on the van that's metal. Have someone crank it over for just a second or two and see if a small spark jumps from the screw driver to the metal part. I'll check back for your answer.

Mar 05, 2010 | 1996 Mazda MPV

1 Answer

Where is the BCM located on a 2002 Mazda MPV LS


yes this is a central control module problem, but you can't replace it, it has to be programmed for your car or it will not start.

Nov 02, 2009 | 2002 Mazda MPV

1 Answer

2002 mazda mpv firing order please


let me know if this help you....

0fc1a6a.jpg

Oct 04, 2009 | 2002 Mazda MPV

1 Answer

Mazda mpv lx 2000- remote control not responding. the alarm would go off but the remote wont click it off


Does the remote do anything at all? Lock/unlock doors etc.? If not it's likely that the remote needs to be reprogrammed (can be done easily with online instructions) or the obvious: the battery is dead.

Aug 03, 2009 | 2000 Mazda MPV

1 Answer

2001 MPV Car alarm


buy remote control and programing you fix the problem

Feb 18, 2009 | 2000 Mazda MPV

1 Answer

How do i program a new ignition key (chip) for a 2000 mazda mpv


For ford or mazda cars, to program a key that isn't programed, you need two programed keys, if you don't have two programed keys, you have to go to the dealer and they must program the keys for your car. I hate to say this isn't cheap to do. I just had a key made for a 2002 Ford Focus and it cost me $65.00 for the keyblank and the programing of the key. I don't know of any way to bypass such a system on these type of cars.

Good luck

Oct 25, 2008 | 2000 Mazda MPV

Not finding what you are looking for?
2000 Mazda MPV Logo

2,061 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

70347 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6876 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...