Question about 1994 Mazda Protege

1 Answer

I'm working on a 1994 Mazda Protege DX 1.8 sohc. The car recently died while running and will not start again. It has plenty of fuel pressure. There is no spark out of any of the 4 plugs. There is power to the coil. I replaced the coil and still nothing. I'm learning more about this car than I care to know at this point. I'm told it has an "ignitor." Is this before the coil or part of the distributor?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the same problem. first I changed the computer. No avail. comp. was fine. Second, got a distributor from junk yard. Works great 10k mile later. Try the distributor and ignition coil. the New oem parts are pricey. good luck.

Posted on Dec 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1994 mazda protege dx 1.8 sohc want to change to dohc what do i do thanks


You would have to change the entire motor, trans, ecu and wiring harness and other things

Oct 20, 2013 | Mazda Cars & Trucks

1 Answer

97 Mazda Protege dies while driving down the highway and will not start.


check fuel pressur, filter and fuel pump...sounds like it isnt getting fuel

Sep 23, 2012 | 1997 Mazda Protege

1 Answer

What is the purpose of the water sending unit located at the thermostat?


For 1994 Mazda Protege 1.8L MFI SOHC 4cyl the Coolant Temperature Sensor is located under hood, driver side, upper engine area, end of cylinder head, mounted in top of water outlet, work for activated the electrci cooling fan whan is necessary.

Feb 07, 2011 | 1994 Mazda Protege

1 Answer

2001 mazda protege dx 5 spd dies, brakes are seized up?


It seems that one of the pulleys is bent, or you are using the wrong timing belt. I would suggest changing them. That would probably explain why the timing belt keeps breaking. The braking problem can be related, or you simply have a leak somewhere in the system and should try bleeding the brakes after thorough inspection.

Apr 12, 2010 | 2001 Mazda Protege

1 Answer

How do I change the valve cover gasket?


I just changed mine two days ago.I have a 1994 Protege DX and the VIN number says it's a DOHC. It does have two overhead cams BUT the value gasket is for the SOHC. My gasket has 6 holes.... just double check.

Simply loosen the six 10mm bolts and don't forget the 10mm bolt left side holding the timing belt cover in place. Disconnect the two rubber hoses and each end of the valve cover. I used a small screw driver to try out the old gasket. reverse process.

Mar 30, 2010 | 1994 Mazda Protege

1 Answer

Engine quits running after starting.


Check the fuel pump pressure while it is running and begins to die, the fuel pump has 2 circuits, one supplies power while you start the engine, the other after the engine is running, you may have an issue with the run circuit of the fuel pump.

Sep 02, 2008 | 1994 Mazda 929

Not finding what you are looking for?
1994 Mazda Protege Logo

Related Topics:

261 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...