Question about 1986 Chevrolet Camaro

1 Answer

86 IROC heater core

Hi i just bought an 86 IROC Z28 Camaro and the heater core needs to be changed. is it possible to remove it without pulling the dash out?
do you have any visual details showing how it is done?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,952 Answers

Removal & Installation
1.Disconnect negative battery cable. Drain cooling system. Disconnect heater hoses from heater core, and plug openings. Detach hood release cable. Remove both dash side panels. Remove left and right lower dash trim panels. Remove glove box. Remove 7 screws securing center accessory console. Disconnect wires on accessory console, and remove accessory console. Remove control cables at heater case.

2.Remove 4 bolts securing steering column to instrument panel. Lower steering column. Remove 2 bolts from instrument panel mounts at far left and right sides of instrument panel. Remove defroster duct trim on top of dash. Remove instrument cluster screws. Pull instrument cluster out slightly. Disconnect electrical connections and speedometer cable from instrument cluster. Remove instrument cluster.

3.Disconnect all electrical connectors from instrument panel. Remove parking brake console. Remove glove box. Remove bolts securing instrument panel support to floorpan. Remove all instrument panel mounting bolts. Remove instrument panel.

4.Separate heater case from blower. Remove 3 nuts and pull heater

Posted on Dec 06, 2008

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i replace the rear axel bearings on a 1988 Chevrolet IROC Z28 Camaro


Put car in neutral, remove wheels, calipers and rotors, diff. cover. rotate carrier until you see wrist pin retaining bolt, remove bolt and slide out the wrist pin out of carrier. Next push axle inward to remove inner axle "C" retainer washer then slide axle out of tube. Then pry off axle seal and with slide hammer w/attachment remove axle bearing.

Feb 23, 2014 | 1988 Chevrolet Camaro

1 Answer

95 Camaro Z28 appears to be leaking antifreeze from the hose or hoses that run to the heater core. The hoses are rubber but appear to connect to metal lines then back to rubber before they go into the...


if your rubber hoses are cracked and leaking then replace the hoses with proper size and length.
if the hoses are leaking where they connect to the metal fittings from the heater core then try and tighten up the hose clamps -- they could just be loose.

c...

Jan 04, 2011 | 1995 Chevrolet Camaro

1 Answer

87 IROC WITH A ZZ4 OUT OF A 91 Z28... fitted a


Fuel pressure? Do you hear the fuel pump running? Read the codes to see if ECM is still alive. Do you have spark at the plugs? Remember all motors need 3 things to run air, fuel, and fire at the right time.

Mar 16, 2010 | 1987 Chevrolet Camaro

1 Answer

I am having problems keeping my 86 camaro iroc z idling


Check your idle air stabalizer or sometimes called the idle air control valve, it may be clogged with carbon buildup and not working properly,

Oct 20, 2009 | 1986 Chevrolet Camaro

1 Answer

I am changing the low beam on a 1986 camaro iroc z28 and cannot get at the two lower screws. Any ideas?


You kn ow you have to take the outside chrome piece off, right? If you have the top screws out, you can usually just bend it forward enough to get the headlight out.

Jun 07, 2009 | 1986 Chevrolet Camaro

1 Answer

1984 Camaro Z28 Wiper switch wont work properly


hello I will take a picture of the Diagram and send it to yea I have a 86 Iroc z28 So i have a Haynes manual for yours as well for most of the f body's are universal. I need a Email or a way to send you the file?

Dec 01, 2008 | 1984 Chevrolet Camaro

1 Answer

Heater core needs to be changed


when your heater core goes bad, generally it leaks inside the car and can leave a odor of antifreeze. It can effect colling of the engine...so I would change it.

It is behind the dash..but not a huge deal..take your time some saturday afternoon & youll have it

Nov 19, 2008 | 1986 Chevrolet Camaro

2 Answers

1984 Chevy CamaroZ28


that depend on what harness you are looking for the ECUharness is located inside the car passenger side as you sit in the passenger seat it will be at the right side of your feetin behind the carpet just to the left of where your door hinges are.

May 26, 2008 | 1984 Chevrolet Camaro

Not finding what you are looking for?
Cars & Trucks Logo

1,089 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70347 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6876 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...