Question about 1999 Mercury Villager

1 Answer

Where is the heater blower resistor located - 1999 Mercury Villager

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mercury Master
  • 4,369 Answers

Blower Motor Resistor
The four-speed operation of the blower motor is achieved through the blower motor resistor. The blower motor resistor is mounted under the A/C evaporator/blower motor assembly.
-----------------------------------------------------------------------------------------------------------------

the heater blower resister is in the heater plenum under the dash on the passenger side. the resister is in the air stream to keep it cooled. it has 2 screws holding it in and a 3 or 4 wire connector on it. easy repair. buy resister from tascaford.com for 25% off.


Posted on Jan 09, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the blower motor located


      The heater blower motor resistor is located underneath the dashboard in the heater/AC compartment.

      Heater Blower Motor Resistor Replacement - YourMechanic

      https://www.yourmechanic.com/.../heater-blower-motor-resistor-replaceme...
    Feedback

    Replacing A Blower Motor That Doesn't Blow - YouTube

    ? 2:29
    https://www.youtube.com/watch?v=4edK8fa-Ypg
    Mar 9, 2011 - Uploaded by Scotty Kilmer
    Scotty Kilmer, mechanic for the last 46 years, shows how you can replace a broken blower motor in your car ...

    Blower Motor Replacement and More - YouTube

    ? 13:19
    https://www.youtube.com/watch?v=2p5QYd58sTk
    Jun 12, 2012 - Uploaded by talyn875
    Do not try this at home. For HVAC professional use only. This video shows yours truly changing a blower motor ...


Feb 09, 2016 | Cars & Trucks

1 Answer

Where is my blower motor resistor located on a


Hi Carlos,here's a link to your blower motor,the resistor is located next to the blower,2 screws hold it on,just remove electrical connector and screws and take to Autozone and match up,very easy to do. GET 25 GIFT CARD FOR EVERY 100 SPENT ON ONLINE SHIP TO HOME ORDERS Here's the part. Heater Blower Motor Resistor at AutoZone com Best Heater Blower Motor...

Nov 07, 2014 | 1992 Buick LeSabre

2 Answers

Fan resistor


Located Usually On Front Of Engine Block About the Size Of A Quarter ( Black ) with One Wire Comiig outof it

Dec 11, 2013 | Cars & Trucks

1 Answer

My heater blowers dnt work and i need to knw where i can locate the resister blocks for my heater blowers so i can ghange them


Its located under dash,or near glove box.

The dash panel lower side has to be out.

HEATER BLOWER MOTOR


Its faulty blower motor resistor. The low and medium speed on blower motor is controlled by resistor and its actual speed is high. So because resistor is not working, blower motors actual speed which is high is working.


It can be faulty blower motor or faulty blower motor resistor. Get the blower motor inspected. If it's faulty it has to be replaced.


=======

For blower motor testing and replacing, check the link below: ----

Blower motor Testing/replacing for all vehicles?

http://repairhelpcenter.blogspot.in/2012/02/blower-motor-replacing-for-all-vehicles.html

------------

These will help.

Thanks.

Nov 28, 2012 | Cars & Trucks

1 Answer

Remove heater control switch


Before removing the heater switch on this 2006 citroen hdi I would first have the blower motor checked and the most common reason for this and other blower problems would be the blower resistor.

Your blower works on and off at times, first locate the blower motor and the resistor. the blower motor is located on the heater box, look under the pass/side of the dash, you may have to remove under dash cover to see blower.
When you have located the blower now look to the side on the heater box, there you will see a connector plug, it plugs into a connection on the heater box, this will be the resistor, the resistor slides into heater box and the end of it bolts to box to hold it in place and then the connector plugs into it, if you can not locate it then follow wires that plug into blower , follow wires back they will lead you to resistor,
next time blower does not work wiggle connector to resistor and see if blower turns on, if it does then resistor is the problem. also unplug resistor plug at resistor and check for any burning of connectors at plug and inside resistor.

I would bet its a bad resistor or the plug is brunt due to high draw from bad connections, if plug has burn damage to connectors then replace the plug along with resistor.

Jul 08, 2012 | 2006 Citroen C5 HDi

3 Answers

Blower motor resistor, where is it located/


It will be up under the dash on the passenger side near the blower motor. It will have 5 or six wires in its connector

Nov 10, 2010 | 2000 Jeep Grand Cherokee

1 Answer

1999 grand marquis were the blower motor resistor is located


this is for manual heater system. If you have electronic (digital display) you don't have one. Instead you have a blower motor speed controller.

here is info

Control System Outputs—Manual A/C
Blower Motor Switch Resistor
The heater blower motor switch resistor has the following features:
  • The assembly is located in the engine compartment on the evaporator housing toward the center of the vehicle.
  • Three resistor elements are mounted on the resistor board to provide four blower motor speeds.
  • Depending on the heater blower motor switch position, series resistance is added or bypassed in the A/C blower motor circuit to decrease or increase A/C blower motor speed.
  • An overheating protective device (thermal limiter) will open the resistor coil when the temperature reaches 121°C (250°F) interrupting the blower motor operation in all speeds except HI.
  • The thermal limiter cannot be reset and is not serviceable.

Dec 12, 2009 | 1999 Mercury Villager

1 Answer

A/c heater fan no blow


sounds to me like the blower motor resistor, and if I'm not mistaken the resistor and the blower motor are located under the dash on the passengers side. the resistor should have a wiring connection and 2 screws attaching it to the blower case. The a/c and heater blower will not work if the resistor goes out. hope this helps you out a little. Best wishes.

Jan 16, 2009 | 2006 Jeep Grand Cherokee

1 Answer

Where is the heater blower motor resistor located


if you locate the blower motor the rester is the wire that atachec to blower motor fallow wire till you find a circuit bord this is ur resistor

Dec 06, 2008 | 1999 Mercury Villager

Not finding what you are looking for?
1999 Mercury Villager Logo

Related Topics:

392 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...