My check engine light will not come on when you start the car, so it made my car fail inspection. It does have a code, but I can not remember what I did with the paper. The car runs fine, but the mechanic said if I can find out what the code was he could reset it. Other than that the he said car runs great. please help. I need my car, and I do not have time to be getting no unnecessary tickets for driving my car with suspended inspection. :{
SOURCE: 96 Ford Windstar runs rough, check engine light on
Sounds like you have some EGR ports clogged up, remove the intake and look at the egr ports all but
#1 cyl port will probably be at least partially clogged, hope this helps
SOURCE: Need to Pass Inspection - P0174 & P0171 codes
it is very possible that the tech caused the light to come on, and yes again your local autozone will be able to clear the code for you but keep in mind if there is truely a problem the light will come back on.
SOURCE: 01 Ford Expedition. Check Engine light and failed Smog check.
whoever installed the egr valve, if it wasnt you, just cleared the engine codes, thus giving you this problem once again. Get it scanned at autozone, and go from there.
SOURCE: I have a 1997 Ford escort, 4 cyl. before I had the
Yes if you disconnect the battery then the stradegies reset and it does take awhile for them to reset.
However if the service engine soon light is coming on then there is a problem with your vehicle.You will need to have it scanned for codes. Since you are blowing black smoke at start up I suspect either a vacuum line is off or a loose connection at the Mass Air Flow sensor.
SOURCE: 2000 Ford Taurus Flex Fuel V6. Check engine light
your code is or the following. Fuel Pump Secondary Circuit Malfunction. This may involve removing your gas tank to fix. Go to the parts store and they can get you the parts you need and let you know for sure.
67 views
Usually answered in minutes!
×