Question about 1979 Ford F 350

1 Answer

Starter problem i have 1989 winnebago with 460 ci engine on john deere chassis. had a few charging problems .so far i have replaced igniton module ,voltage regulator, solenoid, altenator, and starter. yesterday started fine , moved the camper to a new spot ( just approx.100 feet) shut it down 2 hrs later i went to start it the starter stayed engaged after engine was running , buy the time i got to the front and opened the had just a nasty clunk and nothing what would cause the starter to stay engaged

Posted by on

  • Anonymous Mar 15, 2014

    installed a new starter\solenoid and fusible link but when I engage the igniton all I get is a click

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 194 Answers

It is the cilanoid the points in side of it welded together try tapping it a few times then is that doesn't work replace it its a easy fix and is very inexpencive

Posted on Dec 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does my starter just click and not turn my engine over?


I don't think the number of teeth on the starter matter. You just need the right starter for that engine.

In 1968, the 283 CI was replaced with a 307 CI. In 1969, the 327 CI engine was enlarged to the 350 CI. Those are the options for those years, small block v-8s: 283, 307, 327, 350; Big block v-8s were the 396 CI, and 402 CI. An old chevy guy might be able to tell you what engine you have, by looking at it.

Mar 16, 2015 | Cars & Trucks

1 Answer

1985 ford E350 with a 460 ci engine....have no spark when it cranks..replaced ingition module, coil and pickup, still no spark????


is the distributor turning as some of these had a problem with the driven gear at the bottom of the distributor shearing off the lock pin causing a no start as the distributor is not turning.

Oct 10, 2014 | Ford E350 Cars & Trucks

1 Answer

1988 Winnebago, not charging at all.


If it is just the chassis battery that is not charging, then the battery isolators if bad. Check the output at the back of the alternator and if it is puttin out, then the problem should be at the battery isolator which is somewhere on the vehicle (most likely under the hood). Follow the alternator output and it will go to the battery isolator. At the battery isolator the lead coming from the alternator should read at least 13.5-14.5 volts and if it does, then check the other two leads coming off of the isolator and they should also read the same. The two leads coming off of the isolator should each go to a different battery and they both should read the same but if not then the isolator is bad. If the two leads coming off the isolator do read 13.5-14.5 volts, then there is a problem between the isolator wiring and the battery somewhere. Check the battery to engine ground, engine to chassis grounds and make sure that they are good. The chassis battery is more than likely a chassis ground so make sure that is has a clean connection. Coming off of the starter solenoid are several fusible links and they could be open(blown). There could also be other fusible links on the vehicle so check around the starter and along the wiring harness. Check the harness for frayed/broken/corroded/ or discolored wires as they can cause problems. If the charging system is working the batteries do not need to be new in order to read the correct charging voltage.

Aug 06, 2012 | Ford Cars & Trucks

1 Answer

There is no parking brake, and "park" does not hold. it is a 1990 cruise air lll on a john deere chassis with a ford 460 engine.


The parking brake is activated by the shift lever. There is no parking paw in the transmission on these John Deere Chassis motor homes. The parking brake is the type that works a brake on the drive shaft. I ran into the same problem and just put a line lock on the brake line.

Sep 01, 2010 | Ford E-350 Super Duty Cars & Trucks

1 Answer

I need to know how many wires go to a 1989 ford econoline fuel pump with a 460 efi engine


I suggest check this wiring diagrams for code color wires...


1989 5.0L & 5.8L & 7.5L ENGINE SCHEMATICS

2fa9322.gif




1989-91 CHASSIS (GASOLINE)SCHEMATICS

6dd87e2.gif



1989-91 CHASSIS (DIESEL) SCHEMATICS

1887a7c.jpg


Hope this help.

Mar 23, 2010 | 1989 Ford Econoline

1 Answer

I NEED BELT ROUTEING GUIDE FOR 1989 7.5L FORD ENGINE ON A JOHN DEERE CHASSIS MOTOR HOME


Hello, i am enclosing the serpentine belt diagram for you. Have a great day!530723c.gif

Oct 08, 2009 | Ford E-350 Cars & Trucks

2 Answers

460 wont crank when engine is hot


If the battery is ok - the starter might need some shimms..
Easy enough.. Pop off the starter - put a few shimms in whre it bolts on..

Jul 23, 2009 | 1989 Ford F 250

1 Answer

Ford 460 - no spark


Since the distributor is in the front on the 460 and you replaced the water pump check the connection plug coming from the distributor. If you disconnected it when removing the water pump you may not have made the connection tight enough to complete the connection. Look for pinched wires also. And your engine does not have points. You have a breakerless ignition system in the distributor. The air gap should be set at 8 thousands of an inch. Check the gap. Good luck.

Mar 05, 2009 | 1989 Ford F 250

1 Answer

Ford 460 - no spark


get another ignition module sometimes they come broken and if it keeps happening there might be an electrical draw somewere

Jul 07, 2008 | 1989 Ford F 350

Not finding what you are looking for?
Cars & Trucks Logo

244 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...