Question about 1995 Chevrolet Monte Carlo

1 Answer

No taillights, brake lights or turn signals

1991 Chevrolet Monte Carlo - The Third Eye brake light works, but I've got no other rear lights. I've checked/changed fuses and bulbs with no success.

Help !

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chevrolet Master
  • 70,387 Answers

This is usually caused by a defective multifunction switch, see it quite allot, the clue is the 3rd brake light, it is on a separate fuse and does not run through the multifunction switch on the steering column.

Posted on Dec 05, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My monte carlo 2003 does not have taillights everything works except taillights and dash lights


2 things to look at is the directional switch and or brake light switch on the brake pedel. my 1999 monte had the same thing and I replaced thedirectional switch and it was fixed

Oct 29, 2012 | 2003 Chevrolet Monte Carlo

1 Answer

HOW TO WIRE BRAKE LIGHTS FROM THIRD LIGHT 97 MONTE CARLO


Instead of improvising, why not get the stop lamps working the way they should be. You must be getting power through 15A fuse 23 in the fuse block and the stop lamp switch, otherwise the high mounted stop lamps would not work. Stop lamp power is routed through the turn signal switch and is applied to the tail/turn/stop-lamps. That should solve your problem

Oct 17, 2012 | 1997 Chevrolet Monte Carlo

2 Answers

96 monte carlo rear window brake light works but not brake lights. tail lights work, blinkers work, replaced brake switch and bulbs still not working


This is a common GM specific problem. Your turn signal switch contains an elaborate networking device that has to cancel brakelights while running a turn light. Often times the ground within the turn signal switch is lost causing your situation. After investigating such other possibilities as fuses and loose grounds it may become necessary to replace the turn signal switch. Thank you, Dana

Sep 21, 2009 | 1998 Chevrolet Monte Carlo

2 Answers

1998 Chevrolet Monte Carlo brake lights do not


check blubs if the center light works should be working side brake lights

Sep 07, 2009 | 1998 Chevrolet Monte Carlo

5 Answers

1998 monte carlo brake light problems


Turn signal switch. With you foot on the brake have someone stand behind the car. Wiggle the turn signal lever and see if the the brake lights flicker.

Jun 24, 2009 | 1998 Chevrolet Monte Carlo

1 Answer

1998 Chevy Monte Carlo. Brake lights won't work.


you give some good clues. because your third brake light works but not the other two, and because you sometimes get brake lights if you have turn signals on at the same time, i would say that some wires got crossed up with your other taillights. check out the power wires back in the taillight assembly and the wires that run back to the taillights. something is mixed up back there, now you just have to find it. if all else fails after you isolate which wires are the brake light wires get some new wire, same gauge and roughly same length, remove a bit of insulation but don't cut the wire in two, and put the new wire in as an overlay. if having the new piece of wire there makes the brake light work you found the break in the wire. you can cut out the bad piece and fasten the new piece in. you can solder it if you have the equipment to do that, or you can buy some squeeze in place connectors at the car parts store. either way, good idea to tape it up when you are done. hope that helps

May 31, 2009 | 1998 Chevrolet Monte Carlo

1 Answer

My hazards and brake lights work but my turn signals do not


ok my grandmother has a 1996 Monte Carlo and she had no brake lights and the turn signals barely worked! there is a part in the steering wheel that controls all of this and it cost about 220.oo dollars when it was all said and done cause you have to order the part from General Motors. Best of luck to you!!!!!!!

May 10, 2009 | 1996 Chevrolet Monte Carlo

2 Answers

Rear brake light problem


Check the fuses under the hood, 99% of the time that's what the problem is.

Apr 21, 2009 | Chevrolet Monte Carlo Cars & Trucks

Not finding what you are looking for?
1995 Chevrolet Monte Carlo Logo

414 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...