Question about 2003 Honda CR-V

1 Answer

Crv 03 just started and few second the engine idle dying...

My car all the parts still the original from the time i bougth brand new
except the battery ,brake rotors and pads @ front.Second problem is one of the climate control, the one on the middle is not luminated in the dark. Third is the maintenance req'd. ligth in the instrument panel is blinked longer than before...after start the engine.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 13 Answers

Only a solution for the maintenance light problem.

Turn off the engine, leave key in ignition.
Press and hold the Select/Reset button on the instrument panel (the reset button you use when you're clearing your trip mileage) and then turn the ignition switch On to the second position -- not to the start position.
Hold the button until the indicator resets -- approximately 10 seconds).
bikerbc

Posted on Feb 23, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi there . I'm having problems with my 1997 Opel corsa utility . It starts and idle smooth but after about 20 seconds it splutters and die , if I press the petrol it starts to splutter and die . Usually it...


I'd guess: not enough fuel flow. could be a fuel filter, fuel pump, fuel pump relay, fuel pressure regulator. No check engine codes? I would think there should be some that would help diagnose.

Mar 04, 2015 | Opel Corsa Cars & Trucks

2 Answers

Starts and idles rough then dies


Check for vacuum leaks eg. PVC hose power booster and hoses around manifold area.

Jul 28, 2014 | 1989 Ford F 150

1 Answer

When I start my 2001 hyundai elantra my engine vibrates I turned it off restarted and it did it again I put my hood up everything seem to run right except for one of my belts pop ac belt maybe start...


It sounds like the idle speed is set too low, and it is taking the PCM a few moments to figure the correct setting. If the engine is new, or new to the vehicle, perhaps the engine idle speed setting is incorrectly set too low.

Apr 15, 2014 | Cars & Trucks

1 Answer

Its a 115000 btu multi fuel.it starts up,runs a few seconds,then shuts off.it doesnt smoke or anything wierd,it just shuts off.


It can be low fuel pressure issue or clogged fuel pump. Or its engine related issues,---------------

Check the help link mentioned below to troubleshoot the problem: ------

Engine stalls when gas is given?

http://technoanswers.blogspot.in/2012/01/engine-stalls-when-gas-is-given.html

-------------

Car stalls when MAF sensor is connected?

http://technoanswers.blogspot.in/2012/01/car-stalls-when-maf-sensor-is-connected.html

------------

Car Engine Stalls While Driving?

http://schematicsdiagram.blogspot.com/2011/12/car-engine-stalls-while-driving.html

--------------

Car stalls and throws white smoke from exhaust?

http://repairhelpcenter.blogspot.com/2012/01/car-stalls-and-throws-white-smoke-from.html

-------------

Stalls And Dies At Stop Sign?

http://www.howtobyme.blogspot.com/2012/07/stalls-and-dies-at-stop-sign.html

------------

GMC Sonoma Stalls and idles low

http://technoanswers.blogspot.com/2012/10/gmc-sonoma-stalls-and-idles-low.html

------------

Nissan Pathfinder stalls and bucks on Acceleration?

http://technoanswers.blogspot.in/2012/02/nissan-pathfinder-stalls-and-bucks-on.html

-----------------

1992 Chevrolet stalls and shutdown?

http://schematicsdiagram.blogspot.in/2012/04/1992-chevrolet-stalls-and-shutdown.html

------------

Stumbling and stalling at idle after engine rebuild?

http://schematicsdiagram.blogspot.in/2012/03/stumbling-and-stalling-at-idle-after.html

--------------

1990 mazda 323 stalls and quit running?

http://technoanswers.blogspot.in/2012/02/1990-mazda-323-stalls-and-quit-running.html

-------------

2000 Toyota Camry: Idling and Stalling Problem?

http://whatisbyme.blogspot.in/2012/05/2000-toyota-camry-idling-and-stalling.html

---------

1995 Toyota Corolla: Stalls, Sputters and Pops Through Intake Manifold?

http://whatisbyme.blogspot.in/2012/05/1995-toyota-corolla-stalls-sputters-and.html

----------------

1999 Toyota Camry: Erratic stalling and high engine RPM at idle?

http://whatisbyme.blogspot.in/2012/05/1999-toyota-camry-erratic-stalling-and.html

--------------

Dodge Dakota stalls, stumbles at idle. Has low fuel flow and runs hot?

http://schematicsdiagram.blogspot.in/2012/03/dodge-dakota-stallsstumbles-at-idlehas.html

--------------

1994 Toyota 4Runner: Stalls and Stops While Driving?

http://whatisbyme.blogspot.in/2012/05/1994-toyota-4runner-stalls-and-stops.html

---------------

1997 Toyota Camry: Erratic Idle and Intermittent engine stalling?

http://technoanswers.blogspot.in/2012/04/1997-toyota-camry-erratic-idle-and.html

-------------

Ford Maverick: No Idle and Stalling issues?

http://schematicsdiagram.blogspot.in/2012/04/ford-maverick-no-idle-and-stalling.html

-------------

These details will help.

Thanks.

Nov 28, 2012 | Cars & Trucks

1 Answer

Polo 1996 16i Not start first time


You need to change engine coolant temperature sensor/ECT/.Black with 2 or 4 pins depence of a type of the engine.Some of new models use blue one also with 4 pins.

Apr 21, 2010 | 1987 Volkswagen Jetta

1 Answer

My 03 Trailblazer was making a loud squealing noise. I replaced the belt and a week later the belt shred to pieces and the water pump appeared to be leaking. I replaced the water pump along with another...


Have you tried to checking the tensioner and the idler pulley? The idler is a fixed pulley on the driver side of the alternator. Most of the time this gets rusted during sudden change in the weather or its just the bearing inside it just worned off.

Sep 20, 2009 | 2003 Chevrolet TrailBlazer

1 Answer

Erratic idoling when warm


sounds like the air idle valve , if you can get hold of valve to test, try this find valve on inlet manifold and pull hose off going to throttle body,reconect hose to new valve so valves are i line to each other, start car and let it idle for a few moments till the fast idle slows down, then disconnect the wirering goint to the original aiv and connect to the new one , hopefully the original one would have been diconnected in the open position , reconnect wirering to the new valve and turn engine off. disconnect battery for 20 seconds . recon battery and turn ignition on, pump gas pedel 5 times to reset . start engine and let it idle for a few moments ,then try to turn steering wheel , engine speed should rise slightly due to load from power steering pump and then settle back down 875 1075 rpm.this is what the air idle valve should do. if it doesen't look at wiring goig to aiv might have scuffed through.

Aug 09, 2009 | 2002 Land Rover Freelander

1 Answer

1989 Ford Escort GT 1.9L HO starts then dies after a few seconds.


Check the idle air control valve. This sounds like it is not working right. it controls how much air the engine gets when it is idling. the pcm tells it to open more or close. they get old and dont respond fast enuf.

Good luck

May 16, 2009 | Ford Escort Cars & Trucks

2 Answers

Stalling at idle


Bought a use 03 last week for very cheep because it was idling rough, read in a forum about focus vacuum leaks and to use small burst of starting fluid to find the leak, spray around engine, if you hear the engine level off and run smooth in a particular spot for a few seconds the leak is in that general area, check the hose in that area, i found a large elbow on my pvc valve line was cracked in half, repaired with copper plumbing elbow fitting and silicone. now runs perfect. be very careful with the starting fluid short burst in well ventilated are.

Jul 21, 2008 | 2000 Ford Focus

Not finding what you are looking for?
2003 Honda CR-V Logo

164 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

64052 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...