Question about 1996 Chrysler LHS

2 Answers

Garage door opener 96 LHS

How do i program the garage door opener in my 1996 Chrysler LHS?

Posted by on

  • 1 more comment 
  • Anonymous Mar 25, 2009

    please be alittle more specific and provide detailed directions

  • Gord Mar 26, 2009

    Mine is a 1994 New Yorker with the factory installed 3 button garage remote atop the drivers' sun visor. I've been trying to determine how to program it for a long time. Problem is...the original garage door remote has been misplaced, or stolen.

    Can I use the "learn" button on the unit to search out and acknowledge the visor remote ?

  • Anonymous Apr 01, 2014

    program garage door opener on Chrysler 300

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 90 Answers

Clear the 1-3 buttons on your visor by holding them down until you do not see the blinking light next to it ,after the light shuts off you can take your remote and aim it at the mirror or visor where your 3 buttons are located ,while holding down the button of your garage door opener press the button on you visor/mirror that you want to program it take a few minutes but it can also be programed from the opener smart button ,but you have to get the button in the car to learning mode first , you also can check your owners manual and it will also have information on how to program and also your car dealer can also do it for you when you get your oil changed! i hope i was able to help you and if i was helpful please leave me a nice rating thank you Sincerely glenn mayer

Posted on Mar 07, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I am tring to make sure i understand this correctly, press and hold the botton until they stop flashing and then hold the remote towards the buttons in the automobile

Posted on Apr 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am trying to program the garage door opener on a used Chrysler 2000 LHS that I just bought.


GOTO HOMELINK.COM

THEY MAKE THE SYSTEM AND HAVE INSTRUCTIONS YOU CAN DOWNLOAD.

PLEASE NOTE: NOT ALL BRANDS/MODELS OF OPENER WILL WORK WITH THIS SYSTEM.

HOPE THIS HELPS

Jun 12, 2010 | 2000 Chrysler LHS

2 Answers

I want to know what the three little buttons on driver side sun visre?


You should look in your car manual and it should tell you what they are. Hope this helps!?

Please rate solution - Thanks.

Apr 22, 2010 | 1996 Chrysler LHS

1 Answer

Program remote 1996 chrysler lhs


Setting in the car remote in hand turn the key on and off ( don't start the car ) three times within 5 seconds. Now press the door lock button until the doors lock and stop it should now work.

Oct 03, 2009 | 1997 Chrysler LHS

1 Answer

96 chrysler Lhs when i take my foot off the gas


idol air controler keeps car running at idol speed ,you can take it off and clean it with throttle body cleaner to get carbon off its located on throttle housing ,if this works or improves your problem at all get a new one...

Oct 01, 2009 | 1996 Chrysler LHS

1 Answer

Will the blower power modules from a 1997,1998,1999,work on a 1996 chrysler.


Don't see a LHS for 1998, just compared 96 and 97, 2 different parts although same engine. They must have modified the heater/ac system in 98. From what I can tell, the 96 has a bracket attached to the motor whereas the 97 doesn't . If you were to remove the old blower motor and bring it to the junkyard and check it against the 97 or newer blower motors, it's possible that its just a matter of retrofitting the bracket off your broken motor to the newer model. Hope this helps and Best of Luck to you!

May 10, 2009 | 1996 Chrysler LHS

2 Answers

How do i shut off or disengage the alarm system on a 1996 chrysler lhs ligths flash ,horn honks, and car will not stay running. i do not know why alarm set it self do not remoteless entry key pad so i am...


Man,I just bought a 96 chrysler lhs(salvage title) and we drove it home...Had no keypad.My girl and I got out and she left her purse...I opened the door and that car started honking and everything...Alarm wouldnt cut off so,What i did was go to the driver's door,Put the DRIVING KEY IN THE LOCK and locked and unlocked the door...Then,the alarm went off.Try that and if it doesnt work...Try to use those buttons.

Mar 08, 2009 | 1996 Chrysler LHS

2 Answers

Car wont start


i had this problem with mine just opening the door with the key seems to disengage the alarm so that the engine will start again

Sep 22, 2008 | 1996 Chrysler LHS

Not finding what you are looking for?
1996 Chrysler LHS Logo

1,120 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...