Question about 1999 Ford Crown Victoria

2 Answers

How to remove starter from 1995 ford crown victoria

How can you get at the top bolts to remove the starter ?

Posted by on

  • 2 more comments 
  • Anonymous Mar 12, 2014

    1993 ford crown victoria starter removal

  • Anonymous Mar 15, 2014

    windows on a 1995 ford crown victoria get stuck

  • Anonymous Mar 23, 2014

    how can i remove bolt

  • Anonymous Mar 31, 2014

    replace starter on 1999 chev tracker

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 45 Answers

Yes they are very difficult to get to.
its just the top one and some mechanics leave them out after starter replacement.
it sounds bad but true.
i use either a stubby 10 mm wrench and a prybar to break it loose,
or a 3/8 ratchet and a wobble extenion and socket. it has to be the perfect length using different extensions to reach and still fit with the ratchet handle at the back of the starter.
sorry but it can be done.....
no stubby wrench, cut one

Posted on Feb 11, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

95 Crown Vic Starter
6 o'clock - 10mm short socket - no problem
9 o'clock - 10mm long socket - 3/8" wobbly socket - 3/8" universal joint - take some more time.
11 o'clock - 10mm short socket - 3" wobbly extension - 6" wobby extension - 6" wobbly extension - 3/8" flex head ratchet.

I have pretty small hands - sufficient to feel both ends of the extensions and fit the socket - and it was still a b*tch to get at the starter bolts - if you have big hands, I don't know what you're going to do.

Posted on Sep 08, 2015

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace 1993 Ford Crown Victoria starter


The starter will be under the car on the passenger side. You will need to raise and support the vehicle. There will be two bolts that hold the starter onto the transmission. Remove those two bolts and lower the starter. You can then remove the positive cable end and the smaller start terminal wire. Let me know if you have any questions and I'll do my best to answer them. Thank you for using FixYa.com!

Feb 26, 2012 | 1993 Ford Crown Victoria

1 Answer

Is the starter hard to remove


NO , USE A 10 MM SWIVEL SOCKET FOR THE BOTTOM AND SIDE BOLT ,,USE 10 SOCKET AND 4'' EXTENSION TO REMOVE TOP BOLT USE 8MM SOCKET TO REMOVE SWITCH WIRE AND 13 MM TO REMOVENUT ON BATTERY CABLE TERMINAL OF STARTER

DONT FORGET TO REMOVE THE NEGATIVE BATTERY CABLE FIRST

Aug 08, 2010 | 1991 Ford LTD Crown Victoria

1 Answer

Having tough time removing starter from1993 ford crown victoria will someone school me?


The procedure to replace starter on ford crown Victoria is as follows:-- 1) First disconnect the negative battery cable. 2) Then raise the car up, get under it and look by the oil pan. 3) The starer should be at the back of the engine on the bottom. 4) It is by the tranny, un-bolt Starter from the engine, pull it out toward the rear of the car to get the nosecone out of the housing, as you are unbolting it keep it supported while you un-bolt the wires from the solenoid, 5) The starter is removed. Removing the engine is not necessary.But if engine is removed then it makes it more easy,but removing engine is not very easy. Its only three bolts, and if you are doing it by yourself, you should use a mirror and jack the car with jack stands so you can see and move around. Its hard but you won't have to drop the engine. for more help.please click on this link directly. the link has few diagrams and instruction to make the procedure bit simple. http://www.p71interceptor.com/starter/removereinstall/ Thanks. Keep updated for any more query. You can rate this solution and show your appreciation.

Jul 29, 2010 | 1993 Ford Crown Victoria

1 Answer

Change a starter on a 86 crown vick


It is not a bad job to do. Unhook the battery and remove the cable from the starter. Then unbolt it. Two bolts with 1/2 inch heads

Apr 14, 2010 | 1986 Ford Crown Victoria

1 Answer

How to replace the starter switch


you have to turn the key to the on position then stick a small object like an 1/8th inch drill bit. or small screw driver in a small hole on the side of the lock cylinder casing and you can slide out the lock cylinder.

Oct 31, 2009 | 1995 Ford Crown Victoria

1 Answer

Starter is shot


The starter is located at the rear of the engine I believe on the passenger side bolted into the bell housing. First you need to remove the cables from the starter. Make sure you remember where they go so you can connect the new starter correctly. Make a picture or do like I do and take a photo to refer back to if you get lost. Next there are large blots securing the starter to the bell housing that need to be removed. Take out the bottom one first than the top. With all the above done the starter will drop out.

May 08, 2009 | 1996 Ford Crown Victoria

1 Answer

Starter removal


try autozone.com website, they have all kinds of detailed instructions and diagrams

Dec 21, 2008 | 1995 Ford Crown Victoria

1 Answer

How can I get to the top bolts to remove the starter from a 1995 ford crown victoria?


You will have to use a 1/4" wobble extension and slowly work with it. There is no easy way. You can use 3/8 with a longer extension as long as its the wobble type. It has the small groves in it but looks very similar to a regular extension. Mac Tools and Snap-On carry an extension just for those.

Dec 05, 2008 | 2003 Ford Crown Victoria

1 Answer

1995 crown victoria ford police intercepter


get a 1/4 inch ratchet and 1/4 inch extensions short,med, long and the correct size socket , put the socket on the extension and place socket on bolt with hand then add or subtract extensions till the extension is sticking out just enough to get ratchet on.

Jul 02, 2008 | 1995 Ford Crown Victoria

1 Answer

Replacing the starter on a crown vic


I mount bolt is a RELLY hard to remove. Pay the money and have a mechanic do it on a lift.

Jun 18, 2008 | 1993 Ford Crown Victoria

Not finding what you are looking for?
1999 Ford Crown Victoria Logo

Related Topics:

534 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...