Question about 1998 Plymouth Grand Voyager

1 Answer

Serpentine belt what is a ball park figure to replace the belt on a 1998 plymouth grand voyager?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

At 100.000 klm,sor before

Posted on Dec 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change serpentine belt 1998 plymouth voyager 3.0 engine


draw a diagram of how the belt is on now
there is tension pulley which fits a 3/8 ratchet
release the tension on the belt and remove it
install the new belt using the diagram you drew

Nov 11, 2013 | Cars & Trucks

1 Answer

1998 Plymouth Voyager serpentine Belt falls off when it is raining and you go through a puddle


I had the same problem with my 98 voyager that I bought used a year ago, my mechanic suggested to replace the serpentine belt due to visible wear, three days later, it fall off again, this time the mechanic, suggested replacing the belt tensioner, that fixed the problem for good.

Mar 05, 2011 | 1998 Plymouth Voyager

1 Answer

Has there been a new recall on the serpentine belts for a 2000 Plymouth Grand Voyager? I've had to replace 4 this year and I haven't had the vehicle for more than a year yet?


No it hasn't been recalled. What happens to the belts. What size engine? Usually a bad tensioner is what causes the belts to come off and get torn up.

Dec 14, 2010 | 2000 Plymouth Grand Voyager

1 Answer

Need 1993 plymouth voyager serpentine belt diagram


Which engine?
To replace the drive belt or serpentine belt on a Voyager check the engine size. For 2.4L engines, a serpentine belt runs the air conditioning compressor and alternator. For 3.0L models, the alternator and power steering share a belt with a separate belt for the AC. Dodge recommends checking the belts every 15,000 miles or 12 months for possible replacement. I have gone 3 yrs with one.. it will start squealing when you turn on the heater to defrost..

http://www.automd.com/46/how-to-replace-a-serpentine-belt/

Most replacement belts have a diagram on the package. However, the easiest way is to pay close attention to the belt you are taking off, and replace the new one the same way. The pulleys themselves are usually 'grooved' or 'smooth' which tells you whether the front or back of the belt is against it. The hardest part is figuring out how to release tension on the idler-pulley. If you can get the belt on and the idler/tension pulley (same thing) pulls the belt tight, chances are you got the belt right. If you don't know what I mean, then the mostest best way is to get a Clymer Manual and read up. Its really a simple thing to do yourself.

I used a long heavy duty screw driver to release the tension on a Pontiac Sunbird.. the belt will only fit on one way..

May 15, 2010 | 1993 Plymouth Voyager

1 Answer

How do I replace the serpentine belt on my 1998 Plymouth Grand Voyager with a 3.0L V-6 engine


you need a serpentine belt removal tool attech to belt tensioner or a the right size socket for the no and pull up or down to realease belt then slide belt off

Oct 09, 2009 | 1998 Plymouth Grand Voyager

1 Answer

Do you have to remove the motor mounts to replace the serpentine belt?


no, just get a 15mm wrench and put it on the belt tensioner and put tension on it, it will only go one way, slide the belt off

Jun 24, 2009 | 1998 Plymouth Grand Voyager

1 Answer

2000 plymouth grand voyager 3.3 V6, loud noise in serpentine belt area


remove belt and check the pulleys. this belt routing is odd and its very tight. i have seen many failed tensoner pulleys on these. it should spin smoothly and quiet. and grinding or bumpyness in it and i would replace it. check all pulleys while your there. they are not expensive.

good luck,
Michael

Apr 29, 2009 | Plymouth Grand Voyager Cars & Trucks

2 Answers

Serpentine belt broke. Need to replace.


There should be a diagram in the engine bay.
Otherwise, here you go....

serpentine-belt-broke-need-replace-0egsa4g0vt3f5pkv1piq2dve-5-0.gif

Apr 10, 2009 | 1997 Plymouth Grand Voyager

Not finding what you are looking for?
1998 Plymouth Grand Voyager Logo

Related Topics:

230 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...