Question about 1994 Geo Tracker

1 Answer

I need to remove the driver side door. completely  You ever see tommy boy i did that

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Take off the door card -two screrws under the handle and one by the latch, unhook the electrics then knock the roll pin holding the check strap upwards and the same with the hinges starting with the vbottom one. have anassistant ore block of wood (which ever is more inteligent) support he door
Lee

Posted on Dec 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2008 chevy impala power window on the driver side will not raise. When you depress the switch, it tries to work. But when you try to raise the window, the switch seems to have no power. What can


z

General instructions for door panel removal; Door panels are attached to the door frame with clips such as the one above. The ribbed, screw-like part of the clips are inserted into holes in the door frame around the perimeter of the sides and bottom of the panel
Auto Repair Mechanics How to Remove Car Door Panel

The video shows details of door panel removal. First locate all the screws on the door panel, usually at the door handle and door rest. Look for any hidden screws that may be covered with small plastic caps.

After all screws are removed, the side and bottom clips need to be popped out of the door frame. You can purchase a set of trim tools to pop the clips, or you can use flat blade screw drivers and a flat putty knife to pop the clips out. Sometimes the clips break, but they are replaceable. Once the sides and bottom are loose, the top of the panel is loosened by lifting up on the panel, disengaging the panel from the top track on the door frame. Be careful of wiring connectors, which will have to be disconnected to completely remove the panel.

May 26, 2014 | 2008 Chevrolet Impala

1 Answer

My 2004 Tahoe is blowing ice cold air out of drivers side vents, and only blows heat from two passenger side vents... This is a huge issue for me being a single mother of two little boys that always need...


You have a blockage in your vents, this may be a vacuum servo on the drivers side, it is very hard to get at and should only attempted by someone very experienced. you may have to remove the dash pad, glove box every thing from door to door just to get to it

Dec 01, 2013 | Cars & Trucks

1 Answer

Repair driver side door


tHE DOOR PAIEL IS SURRONDED WITH 6 TO 8 PLATIC RETAINERS THAT SNAP INTO THE DOOR FRME.WHEN YOU TRY TO POP THEM OUT FROM THE DOOR FRAME BE CAREFUL NOT TO SNAP OF THE RETAINERS. yOU CAN DO THIS WITH A SCREWDRIVER. " may be a screw in the door handle or the pull handle. Sorry about the caps lock was on. hope this helps.
Tommy

Jan 07, 2012 | 2000 Dodge Intrepid

1 Answer

Air blend door jeep liberty 2010


My blend air door is stuck on my 2010 liberty. I have removed the actuator panel on the drivers side and the middle door that controls the air flow to the dash is completely seized. There are 4 blend air doors on this liberty, 2 control the heat/ac and 2 control the air flow.
there is no access to them from the drivers side and the passanger side looks like I have to cut into the air box to get to them.

Jan 03, 2012 | 2010 Jeep Liberty

1 Answer

How to remove drivers side door 1993 olds ciera


If you have any electrical controls in the door open the panel and disconnect them so you can remove teh door from the wiring harness. otherwise, open the door and support it on the outer edge away from teh hinges, use an impact driver with proper bit fitted to it, available at Auto Zone, Pep Boys, Advance Auto, or Sears (it uses a hammer to generate torque energy to break the torque in tight spots like an impact wrench) Remove the lower Hinge screws or bolts (These are usually a large Phillips head or a Half Inch bolt head), Then remove the upper retaining screws or bolts. To make it a little easy to handle if you are doing this by yourself, remove all of the screws or bolts from the lower hinge then put 1 back in a couple of turns just to hold the hinge. Repeat the process for the upper hinge. after doing this empty your hands, lift the door slightly and remove the 2 screws or bolts you put back in. after removing the door remove the hinges from the door side so you can use them in the new door.

Sep 19, 2011 | 1993 Oldsmobile Cutlass Ciera

2 Answers

VW Polo 2001 - Electric Windows wont open from Drivers side..


I removed all 3 switches from driver and passenger door, which is really easy with a flat head screw driver. took them completely apart, very carefully, with a small screwdriver out of a christmas cracker. put them back together again and 2 switches started working, so I put 1 in the drivers side and 1 in the passengers side so now my drivers door window opens and I lean over to open the passenger door. cool, no money spent...yet ;o)

Mar 25, 2009 | 2001 Volkswagen Golf

1 Answer

Changing outside door handle drivers door


first disconnect the negative side of battery and then open the door and start looking for small black screws or nuts then remove you find some hidden behind what look like little doors that you will need to remove with a screw driver becareful not to pry the plastic completely out of the door panel itself because if this happens you will have to figure out a way to repair so the panel will stay on the door get a thin pry bar to this job or a butter knife

Jan 05, 2009 | 2001 Ford Explorer Sport

1 Answer

Door panel


Depends on what door trim you are trying to replace. If you are trying to replace the door trim on the front doors you need to remove two screws from behind the casing around the door handle and then remove a screw from the bottom left of the door and then there will be a screw on the left of the door as high as the arm rest on the door. Finally pull up on the door panel and out to remove the panel. Remove the harnesses and you are complete.

If you are trying to remove the rear doors you need to remove a screw from the bottom of the door again near the left side then remove the screw from behind the casing that surrounds the door handle. Finally pull up on the door panel and out to remove the panel. Remove the harnesses and you are complete.

Oct 27, 2008 | 2001 Ford Crown Victoria

1 Answer

Door locks lock and unlock permanently


had this before but with a variety of faults ..boy racer alarm .take it off and invest in a decent steering wheel cover/lock ,fault in lock itself on drivers side as its used the most till i done one with the passenger side lock ,now that throw me .try throwing the boy racer sunday driver alarm away

Oct 12, 2008 | 1992 Ford Escort 4 Door

1 Answer

Broken rear door handle


hi jim,

you need to open the door panel, after removing the panel, raise up your window completely and you can see the nuts or bolts that are holding your door handle.

tnx 4 using fixya,


drcool

Oct 05, 2008 | 2003 Volvo S40

Not finding what you are looking for?
1994 Geo Tracker Logo

Related Topics:

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geo Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...