Question about 2001 Ford Expedition
My heat in my 2001 ford expedition will not blow heat out of it. I just replaced the thermostat and that did not fix the problem. What else could it be?????
The blendoor on the heater box maybe broken ck lines going to heater core and make sure they are hot. does the heat temp change at all from cold to hot?
Posted on Jan 31, 2009
I had the same problem with my expedition. So I changed the water pump and flushed the heater core. But the problem was the dampner under the glove compartment on the passenger side. It was not opening to allow the heated air to blow though the vents. So all I was getting was cold air. Tapping on the dampner it openned and I had instant heat.
Posted on Dec 09, 2008
Sometimes the lines that control your airflow gates get damaged and even though you have hot water running through your system the air is not blowing through the heater rad and into the cab. check your heater lines. if they warm up after awhile then you have circulation there and you have heat and you just need to get the controls working. if not, you could still have a bad thermostat. not everything new is good
Posted on Dec 05, 2008
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Oct 12, 2016 | 2001 Ford Expedition
Feb 16, 2015 | 2007 Ford Expedition
Dec 14, 2010 | 1998 Ford Expedition
Dec 11, 2010 | 2001 Ford Windstar
Dec 01, 2010 | 2001 Ford Expedition
Oct 01, 2010 | 2001 Ford Expedition
Feb 01, 2010 | 2001 Ford Expedition
Oct 11, 2009 | 2001 Ford Expedition
Sep 09, 2009 | 2000 Ford Expedition
Dec 31, 2008 | 2001 Ford Expedition
1,125 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: