Question about Ford Explorer

1 Answer

Where is the blower motor resister located on a 2003 explorer

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

HEY,
IF I REMEMBER CORRECTLY, IT IS ON THE PASSENGER FIRE WALL(AC BLOWER BOX). YOU WILL HAVE TO SQUEEZE YOUR HAND BETWEEN THE FENDER AND THE BOX. HARD TO GET TO WITH BIG HANDS. SHOULD HAVE TWO SCREWS HOLDING IT IN.

Posted on Dec 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Heater fan not working on my 2003 cavalier


From your symptoms I would suggest, inspect the Climate Control and the Blower Motor Resister. Locate and remove the resister and test. You are looking for power at the plug (going to the resister). One wire will always be hot (with the ignition key on). The other four wires are ground wires that through the resister, changes the blowers speed. Connect a test-light to 12volts positive, test that the test-light is working, and then start testing for ground. Unplug the resister and test at the plug. With the ignition key on, test each wire. Each wire should light up your test-light depending on the position of the speed control knob. If it passes then plug the resister back in and probe at the blower motor. The blower motor needs both ground and power to run. Find out which is missing and write back. Good luck.

Apr 26, 2014 | 2003 Chevrolet Cavalier

1 Answer

2003 buick Century air conditioning blower


Hi Ken, I'm glad to help! A/C Blower problems like your, where the blower only blows on HIGH and later stops working all together is usually the "BLOWER MOTOR RESISTER" That is where I would start. Ken, If that does fix it. I would replace the blower motor as well because its usually the high resister within the motor that actually causes the problem with the resister. The Blower Resister on most vehicles is located on the passenger side near the motor. Some are right beside the motor, others are behind the glove box in the housing. Hope this helps and have an awesome day Ken.

Aug 06, 2012 | 2003 Buick Century

1 Answer

Front blower not working on 2003 Pontiac Montana. Tried new blower motor, but did not work. What else could it be?


there is a blower motor resister located around the electrical connection of the blower fan usally one or two speeds quit on the fan when they go bad make sure that the connecter is in good shape and not burned on the plug

Mar 07, 2011 | 2003 Pontiac Montana

1 Answer

How to fix a blower motor resister on a 2003 grand am


it is located under the passenger side dash.remove the cover and it will be close to the blower motor.the resitor will be the other end of the wiring harness for the blower motor.it will be bolted to the heater box.

Nov 18, 2010 | 2003 Pontiac Grand Am

1 Answer

Where is the blower resister on a 1999 ford explorer with auto temp control


most blower resisters are located near the blower motor. even on automatic ac systems.

Sep 16, 2009 | 1999 Ford Explorer

1 Answer

2003 Ford Explorer Fan Blower Motor


Jeff, If I understand you correctly you say your blower motor only works on high? check your blower motor resistor, located next to blower motor. The resistor makes the other speeds availiable, high bypasses the resistor, let me know if that fixes you up

May 27, 2009 | 2003 Ford Explorer

1 Answer

AC on Caravan


you have either a bad blower motor resister or a bad blower motor. the resister is located in the heater box close to the blower motor.

May 23, 2009 | 2003 Dodge Caravan

3 Answers

The blower motor resistor is out on my 2004 dodge stratus.


Hi my name is Allen!

The blower motor resister is located on the passenger side under the dash, it's mounted on the bottom of the A/C Housing.

If you bought the resister from the dealership you will need to make the hole larger for the new style resister so it will fit.

You should also replace the blower motor, because the resistance built up inside the motor is what damages the resister.

For further assistance contact me at FixYa!

Dec 29, 2008 | 2003 Dodge Stratus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

294 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...