Question about 1985 Dodge Charger

2 Answers

2007 charger police car brake lites stay on with ignition on.

As soon as you turn ignition on brake lites come on,third brake lite glows dimly,turn ignition off,brake lites work normally,including third brake lite. When brake lites on w/ignition on,third brake lite glowing,hit brake pedal third brake lite comes on normally!With igntion off all brake lites work normally! Wher can I get wiring schematic on these 2007 chargers??? Thanks, Jerry

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

If that is a police addition car thenunder center console is a police wiring package plug it might be touching ground on trhe brack trigger wire that use for siren park info found here

https://www.fleet.chrysler.com/v7fleet/StaticFiles/files/law/2006_upfittersguide.pdf

Posted on Jan 24, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 194 Answers

Some one has the bulb in backwords or check the wires they might have them crossed

Posted on Dec 05, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brake lights stay on but are very dim?


is that volts with the plug connected sounds like either a ground at lites or brake lite switch under dash, try making your own ground
at tailite, wayne

Feb 14, 2014 | 1998 Ford Explorer

1 Answer

Electrical problems


I would replace the brake lite switch.

Dec 01, 2013 | 1989 Jeep Grand Wagoneer

1 Answer

95 gmc c1500 third brake lite works but cargo won't


The cargo light will only work if the lights in the cab are on. Turn them on then flip the switch for the cargo light and it should come on, if not then it is probably an electrical problem.

Feb 11, 2013 | 1995 GMC Sierra C1500

1 Answer

Third brake lite [ fused or bulb]


Should be on the same circuit as the regular brake lights.

Dec 07, 2012 | 2004 Chevrolet Malibu Maxx

1 Answer

Why are my service vehicile soon lite,brake lite, antibrake lite, and change oil lites on after i start car


service engine light------scan for codes
brake light and antilock brake light ----abs problem scan for codes
change oil light ----- change oil and reset system light

May 21, 2011 | Oldsmobile Alero Cars & Trucks

1 Answer

My tail lights, turn signals, hazards and third brake light works, but my brake lights do not.


Check your brake lite bulb socket alot of times even a newer car will go bad from heat ing every time bulb comes on,,also check for grd on that socket, also should check brake lite swich on brake peddle

Mar 11, 2011 | Ford F-250 Cars & Trucks

1 Answer

I have a reese brakeman compact trailer brake, also a new tundra with a different harness. What I dont have is the wiring schematics for the brake. There are 4 wires, 1 black 1 blue {both are fatter than...


the best thing to do is get a 12 volt lite tester the one with the pointie end. cut your harness turn on left turn signel. with tester lite grounded tuch the ends of the cut wire from truck strip a small piece of wire covering and attach to your trailor harness when left signal works on the trailor do the right blinker the same way as for running lites turn on your park lites and see witch two wires are lit connect to trailor making shure lites are dim last wire are for brake lites now you well know where to connect to new harness good luck cj

May 20, 2010 | Toyota Tundra Cars & Trucks

1 Answer

Brake lites stay on


Change the relay for the brakes

Dec 10, 2008 | 2004 Volkswagen Jetta

Not finding what you are looking for?
Cars & Trucks Logo

280 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

63242 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...