At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The po406 is an egr code which is common for a bad egr valve, but check your wiring and check for plugged port or carbon lodged in valve, as far as the p1561 this is not a good code, this must of been gotten with a genric scan tool, i would fix the po406 and then reset the computer readiness monitors and drive it and go from there. hope this helps, good luck
egr is at the rear of the engine. The light isnt going to go out until the problem is fixed. I would check the egr solenoid first. A scanne,r wiring diagram, and tools are needed to dignose this properly.
the PO406 code is the EGR position sensor. I have heard tho that DMX corp had some issues with this code in the past where basically it was just tossing false codes. But they also did have a higher fail rate on them during 05-07, so you may have to replace it anyways.
I have 2005 Dodge Caravan SE 2.4cc and the code is P0420 I need now what is the exactly problem. all ways when I try to stop the engine turn off or almost turn off.
×