Question about 1994 GMC Jimmy

1 Answer

94 GMC Jimmy heater fan not working

My heater in my 94 6 cylinder Jimmy isn't working, it doesn't blow. Can and how do I replace the fan, or do I need to replace the whole heater core and if so how? Any help would be great, thanks.

Posted by on

  • duncanharp Dec 08, 2008

    Heat still comes out slowly but the fan does not blow one time I hit a bump and it worked again for a little bit but now its dead again so if anyone knows how to replace it that would be great, thanks.



1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

If you hear the fans blowing and no heat is coming
then you mite have to replace the heater.

before you try to replace the heater talk to Lords

Posted on Dec 04, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Why the 30 amp fuse under hood for heater fan keeps blowing

If it blows immediately after turning the fan on, there must be a short. If it takes a few seconds, the motor could need to be oiled, unrestricted (if something is stopping the squirrel-cage from turning), or possibly replaced. Don't go with a larger fuse; you'll burn up the wiring.

Dec 15, 2017 | 2000 GMC Jimmy

1 Answer

Heater problems

The fan motor may be in need of replacement.

Jan 20, 2014 | 1999 GMC Jimmy

1 Answer

Heater only blows cold 1998 gmc jimmy

are both heater hose getting hot

Jan 05, 2013 | 1998 GMC Jimmy

1 Answer

My 94 gmc jimmy is having a little problem that idk how to fix...the radiator fluid is somehow leaking into the floor of the passenger side and it seems to be coming out of the floor heater vents...if...

The idle could be a few things dirty air filter or fuel filter i would check these first you don't mention any engine codes so its likely a minor problem . The antifreeze leaking inside is comeing from the heater code eighter you should check the heater hoses that connect to the core to make sure its not leaking at the nipple but you have a 94 so it may be the core it self has a hole rotted in it or poped a solider joint. How dose the heat work in the vehicle is it ok or blowing cool or cold air . this will tell you a lot because clogged heater cores tend to rot out where if you have good heat then it maybe a minor leak at the hoses good luck with it

Mar 09, 2011 | 1994 GMC Jimmy

1 Answer

I have gmc jimmy 2000. The heater fan making noise. Is it difficult to replace the fan motor. thanks for your immediate assistance. Manny

The heater is behind the dash. You will need to take the dash out of the truck.
Good luck

Dec 31, 2010 | 2000 GMC Jimmy

1 Answer

No heating on blows cold air only....heater core is fine

Mine did the same thing you need to have heater core flushed out. Dexcool coolant clogs it up get it and the radiator back flushed and changed to regular coolant. This should fix the problem.

Oct 17, 2010 | 2000 GMC Jimmy

3 Answers

Everytime i turn my heater on heater on works and blows fuse?

fuse blows. unplug heater blower motor turn ignition on, turn heater on, does fuse blow? if not need to replace heater blower motor

Feb 10, 2010 | 1995 GMC Jimmy

1 Answer

2001 gmc jimmy engine warm but heater blows cold air

Disconnect the heater hoses from the water pump and the intake manifold. Get a compressor and blow out the hose (put the air hose into the the hose that came off the mainfold. then flush the system and replace the antifreeze.

Dec 11, 2008 | 2001 GMC Jimmy

Not finding what you are looking for?
1994 GMC Jimmy Logo

Related Topics:

653 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts


Level 3 Expert

77939 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides