Question about 1996 Chevrolet Beretta

1 Answer

Location of headlights brights and dims

I just got a 96 beretta and the turn signal switch is broke and wont allow me to switch from brights to dims. i think they are on brights but the dash light for the brights is not on. the inner lights are on now and wanted to know if they were the brights or the dims

Posted by on

  • 2 more comments 
  • stepp0311 Jan 16, 2009

    I have a 1995 Beretta the high beams work but I can't get the low beams to work. I changed the bulbs but still not working.The switch for the lights aren't on the turn signal it is located all by it's self at the end of the dash board on the drivers side it's a knob that you turn, the high beams will come on but not the regular headlights.

  • yadayada
    yadayada May 11, 2010

    Are the headlights really bright? if so they are on bright, do people flash there lights at you at night? if so they are on bright, only common sense, right?

  • Anonymous Mar 16, 2014

    the lights are bright they dont dim they are nice and bright

  • Anonymous Mar 28, 2014

    how to fix



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.


    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 124 Answers

The inner lights are the brights but some vehicles also use the bright lamps with low voltage as the daytime running lights

Posted on Dec 05, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Both headlights went out same time . bulbs are good . fuses are good. back lights work and high beam works too. what else can it be? and is this common with these cars . 1998 acura 2.5 tl year is 1998 not...

Test the leads to the bulbs while the low beams are on and then when the brights are on. If you have good bulbs & fuses with no power on low, the problem is most likely the bright/dim switch.
Not exactly sure of the Acura layout, but the covers over the steering shaft should remove with several screws to allow access to the switch (usually the turn signals are also the bright/dim switch) Test the leads out to the headlights from the bright/dim switch, that will tell you if the switch is bad.
Airbags are closely involved with this removal/replacement, it is NOT recommended for a amatuer to undertake.

Dec 17, 2009 | 1998 Acura TL

1 Answer

Where is the headlight dimmer switch locate on the 1990 Sundance? Thank you

either the turn signal arm or a foot switch at the driver left foot area---pull the turn signal arm towards the driver to see if it clicks the headlights bright or dim-----if not, then look for a small floor switch that you step on to click on and off

Jun 22, 2009 | Plymouth Sundance Cars & Trucks

1 Answer

Intermittent Headlights '98 Camry

What module are you referring to?
Sounds like your multi function switch is bad. Headlights, high-low, TS all the same switch.

Apr 14, 2009 | 1998 Toyota Camry

1 Answer

98 Explorer's Headlights won't work...have to hold highbeam on

Sounds like your switch is bad (i.e. turn signal / healight dimmer / winshield lever switch) inside the steering column. Replace as necessary.

Apr 07, 2009 | 1995 Ford Mustang

2 Answers

Headlights go off when lights are switched from dim to bright ...

You need to buy a whole new clicker, same thing happened to me, eventually your bright lights will end up not clicking off or vice versa. and your turn signals will mess up. Get a new clicker, it's the easiest solution, but not the cheap one. mine was like 200$

Mar 21, 2009 | 2002 Chevrolet Monte Carlo

2 Answers

2002 Grand Am GT Headlights seem dim , fog lights dont work

Check at the headlight sockets for a bad ground.

Mar 02, 2009 | 2002 Pontiac Grand Am

2 Answers

My Chevy Beretta Wont Start

first thing to do is check and see if you have a dead battery one easy way to do this is turn your headlights on and have somebody watch them as you try to crank the car, if they dim then you need to try charging you battery or replacing it if your headlights do not dim then most likely your starter motor has locked up or gone bad meaning you will need a new starter

Nov 22, 2008 | 1991 Chevrolet Beretta

2 Answers

Main headlights wont work but bright headlights do

To all, check your dim bulbs. Make sure they aren't burnt out. If they aren't, time to see if your dimmer/turn signal switch is the problem. For the switch, take it to a mechanic or see if someone else will help ya. Wiring isn't my best subject in autos.

Jul 26, 2008 | 2001 Pontiac Grand Prix

1 Answer

Dimmer Switch

To dim your head light, pull your turn signal switch. To dim your dash lights, rotate the switch by your head light switch

Jul 11, 2008 | 1990 Chevrolet Beretta

Not finding what you are looking for?
1996 Chevrolet Beretta Logo

362 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides