Question about 2005 Chevrolet Malibu

1 Answer

Thermostat location 2005 malibu

V6 engine

Posted by on

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 109 Answers

It should be located on the laft side of the motor just follow the bottom hose on your radiator cause that runs directly into the thermostat..

Posted on Dec 04, 2008

4 Suggested Answers

jturcotte
  • 7029 Answers

SOURCE: where is the thermostat located

please see my tip at http://www.fixya.com/cars/r5929960-s_thermostat and let me know if you have questions.

Posted on Sep 12, 2010

DillyWackSac
  • 195 Answers

SOURCE: Where can I find an illustration of the location

Just Follow the upper radiator hose on the driver side of the vehicle towards the engine block. This is where the housing and thermostat is. The housing is affixed by two bolts hard to get to because the exhaust looks as if it is in the way, but dont be too nervous it will come off without taking the exhaust off.

Posted on Oct 10, 2010

ZJLimited
  • 17970 Answers

SOURCE: I would like to see a picture of a thermostat

Click over image for zoom...

zjlimited_1292.jpg

Fig. Air bleed valve (1) and thermostat housing (2) 2.7L-engine


Hope this helps (remember to rate and comment this free answer).

Posted on May 26, 2011

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the mass flow air sensor located at for my 2004 Isuzu rodeo


no engine stated,
my guess v6, as ONLY the V6 had one,
and not all V6 have it.
so, NO V6 size stated or the
8th digit of your VIN code stated, (engine code)
so no answers possible.
there are at least 4 V6 engines generations used.
the last engine is the most comlexe with VVT (3.5L)
it has MAF, and is between the TB and the air cleaner.
on all cars with a MAF, some are in the TB.
facts all
post a vin
i post photos,
sorry not posting them all on both engines 2004

TB = Throttle body, that magic place that sucks huge air.

Mar 23, 2017 | 2004 Isuzu Rodeo

2 Answers

What makes my Chevy malibu 2005 v6 put system code po128 out


http://www.samarins.com/diagnose/p0128.html
My wife's saturn vue is also throwing the same code. I'm starting with the thermostat because we just did the radiator (leaking) so I know there's no blockages there.

Jan 30, 2017 | Cars & Trucks

1 Answer

What's the oil capacity for a 1997 Isuzu rodeo v6 4wd


of the engine,? of what, axles trans, engine or transfer case.?
ill guess v6 engine oil but which V6, there are 3.
3.2L SOHC. V6 and 3.5L (there were 3 engines)
5qt (or till top line on dip,stick)
usa car, 3.2L




26102117-nmmzch1e2jsqevbbrj5zsyvp-1-0.jpg

Feb 20, 2016 | Isuzu Rodeo Cars & Trucks

2 Answers

Where can I find the fuel pressure regulator of Isuzu trooper?


Fuel pressure regulator is located on the back of the fuel rail, back right of engine.

Aug 18, 2015 | Isuzu Cars & Trucks

1 Answer

Where is the Location of the Block Heater on my Chevi Malibu V6


As far as I know, only diesels have block heaters. If i'm wrong it should be on the side of engine under the head.

Feb 15, 2015 | 2005 Chevrolet Malibu

2 Answers

What holds homonic balancer in place on 1993 isuzu trooper 6 cyl


1993 3.2l Gas V6 engines, right>? double posted too.
the torque page is clear, read that yet, seem not.
seem 123 is correct, but
2.8L V6, GM
3.1L v6 GM
or 3.3L V6 Isuzu.
as you can see there are 3 , V6 engines.
an not posted yet, even second post.
above poster used 4 cyl engine and is wrong. BILL
25425095-4ecryu1insy4w5lep2vjmo20-4-0.jpg now answered, 2 twice,
before working on any engine, know whats there first.
and win.

Feb 14, 2015 | 1993 Isuzu Trooper

1 Answer

Suzuki engine diagram


old post
for searchers, i answer
open the hood, see EPA sticker, ? it shows engine type , spec and even spark plugs needed. bingo> in USA< not use, do tell? we cant guess this.
mine is a 2004 grand vitara, no on grands here. that year. USA>
but mine is a V6, you have V6? sure 24v.
the v6 has 12 valve per bank, and is 24valves.
in USA ours is 2.5L other countries have 2.0L or other V6, suzuki
our V6 is called H25.

a free diagram of the H25 is here
http://www.fixkick.com/engine/2.5L%202004%20Tracker/25L-2004-engine.pdf

lots of facts there. if you need more ask
the FSM book is 6 inches thick. i have that and the CD book,

Jun 24, 2014 | 2004 Suzuki Vitara

1 Answer

How do I know which 3.8 is in my 1984 El Camio 229 or 231?


3.8L (229 CID)The 229 cid (3,751 cc) engine was first introduced for the 1980 model year and was produced until 1984. This engine replaced the 250 cid in full-size Chevrolets and Camaros as the new base V6. Additionally, the intermediate Chevrolet Malibu and Monte Carlo also used the 229 cid as a replacement for both the 200 cid V6, and the 231 cid Buick V6. Both the Buick V6 and the 229 cid Chevrolet V6 are 90-degree V6 engines, and both are often referred to as the 3.8L V6. These engines should not be confused as being the same, and are completely unique engine designs.
The 229 cid has a 3.736-inch bore and a 3.48-inch stroke, identical to the Chevrolet 305 cid V8 engine. The 229 cid used the same 2.45-inch main bearing and 2.10-inch rod bearing diameters as the 200 cid V6 engine. Also like the 200 cid V6, the 229 cid used the same crankshaft with the 18-degree offset throws and the same 5.7-inch connecting rods with 0.050-inch narrowed ends. It came equipped with 1.84-inch intake valves and 1.50-inch exhaust valves. The 229 cid V6 was only equipped with a 2-barrel carburetor. For 1980 the 229 cid used a mechanical Dualjet. From 1981 to 1984 the electronic Dualjet was used along with the GM's CCC (Computer Command Control) system. The 229 cid was rated between 110 and 115 hp (86 kW).

Feb 25, 2013 | Chevrolet Cars & Trucks

1 Answer

Replace crankshaft position sensor in 2003 dodge caravan 3.3 V6


According to Haynes, the V6 engine has the sensor mounted in the bellhousing on the back of the engine.

Aug 20, 2012 | Cars & Trucks

Not finding what you are looking for?
2005 Chevrolet Malibu Logo

Related Topics:

795 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

71525 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22059 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7029 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...