Question about 2001 Chrysler Sebring

2 Answers

Here are the fuses for Dash lights on a 2007 Chrysler Sebring? How do I find it, my instrument lights are out except for the clock and radio.

Posted by on

  • Anonymous Mar 17, 2014

    The clock on the dash also does not work. Because the key is still reading as in the ignition the buttons on my key are also disabled and I have to wait at least 45 seconds before I can lock my doors manually.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

On back of panel is a cover. remove black cover. lower left is small black clip cover witch hold lighting tap.in stall small pic of foam to hold pressor on black clip .it worked for use

Posted on Jan 08, 2013

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

My Sebring came with a 36 month Warrenty, does this cover it? If so take it back

Posted on Jan 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No dash, radio or door activated interior lights. Checked fuses already


Dash lights (Gone?) - FSB Forums - FullSizeBronco.com

www.fullsizebronco.com/forum/21.../198643-dash-lights-gone.html
Sep 7, 2011 - Fully rotating the shaft counterclockwise past a notch activates theinterior lights within the vehicles. ... No aftermarket stereo, the dash lights stopped working, and my taillights ... 8 15 Courtesy/Dome/Cargo Lamps, Electric Outside Mirrors, ... 12 20 C.B. Power Door Locks, Electronic Shift Motor 4WD, Power ...

Radio died, remote system not working, door locks will not work ...

www.topix.com > Chrysler Sebring
Aug 13, 2008 - So what all is not working at this time is: Door locks (with remote it only ... My lights on the dash dim some times and if I hit a bump the radio goes off, ... All the fuses are good, but still no power to the radio, interior lights, push ...

2009 Chrysler Town and Country No Dash instrument cluster lights ...

forum.chryslerminivan.net/.../55281-2009-Chrysler-Town-and-Country-...

Jan 13, 2014 - 10 posts - ‎5 authors

Dec 21, 2015 | Cars & Trucks

1 Answer

My fog lights and dash lights dont work on my 1999 chrysler sebring


The 15A fuse 5A in the engine compartment relay box supplies power to the foglight relay. When the headlights are on, operating the fog light switch causes the contacts of the foglight relay to close and the fog lights turn on. At the same time, power that flows through 15A fuse 4 in the engine compartment relay box causes the fog light switch indicator to light.

Power for the instrument cluster is obtained through 40A fuse 4 in the engine compartment relay box and is routed through the taillight relay in the box. When the lighting switch is set to TAIL, the relay closes and power is routed through 15A fuse 4 in a fuse box in the ECRB to some of the cluster lamps. Power passes through a rheostat that controls brightness of other cluster lamps. In addition, an illumination module controls the radio dial lamp, the A/C switch lamp, and the cigarette lighter lamp.

Sep 10, 2012 | 1999 Chrysler Sebring

1 Answer

Interior lights went out


Check fuses, and then the bulb inside dash.

Aug 08, 2012 | 2007 Chrysler Sebring Sedan

1 Answer

Radio, clock,and light on radio does not work after new battery installed. what do I do?


find the fuse you blew when you let the battery terminals touch something and ground out

Jul 15, 2012 | 2005 Chrysler Sebring Convertible

1 Answer

I have a 2004 sebring that i bought new. the instrument cluster lights dont work, i checked interior fuses number 7 and 11 that relate to the instrument cluster illumination. they seem to be fine.


If the fuses are good there should be a dial that adjusts the brightness of the dash panel.If this dial doesn't work then the bulbs for the dash panel might be blown out.

Mar 13, 2011 | 2004 Chrysler Sebring

1 Answer

Instrument cluster lights are out on my 2007 sebring


The cluster doesn't have bulbs it is a closed solid state setup which will have to fixed or replaced. That's if the there is no fuse problem or loose wiring.

Feb 27, 2011 | 2007 Chrysler Sebring Sedan

1 Answer

Have a 2002 Sebring convertable. no power to starter.


sounds like someone forgot to reconnect a power cable from the battery to the fuse block inside the car, you might check this out yourself

Nov 07, 2009 | 2002 Chrysler Sebring

Not finding what you are looking for?
2001 Chrysler Sebring Logo

878 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...