Question about Dodge Neon

2 Answers

I have a 98 neon and the cooling fans would not come on when engine would heat up. I used a jumper wire to the fans and both work great. I replaced the solid state fan relay and they still do not cycle on. I read the troublecodes and i am getting a code 35. Is the problem in the relay in the PCM?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I have a 98 neon 2.0 sohc its leaking oil from passanger side near timing belt cover and leakin quick any ideas possible the cam seal? or rod? i dont think its head gasket

Posted on Jan 06, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 194 Answers

Yes

Posted on Dec 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Who doesn't the engine cooling fan turn on


check the plug connector at the rad cooling fan motor for a bad or damaged connection. then you can run jumper wires from the battery to the terminals on the fan motor itself. if it does not run then the fan motor needs replacing. this is a common problem.

Sep 20, 2014 | Cars & Trucks

1 Answer

Fan quit working


electric fans have a few components . a fan relay usually in a cluster under the hood, temp sensor usually in the engine close to the thermostat , and the fan itself. any of these could cause the fan to stop working. most common is the fan relay . simple fix just unplug and replace. I would first check the fan to see if it runs when hot wired. simply unplug the wires and test the fan with jumper wires from the battery to see if the fans do run. if it fails replace it , the temp sensor is the most complex as it requires replacing by draining the water , removing and replacing ,be sure to use tethelon tape on the threads of the new sensor or it will leak. replace the antifreeze and make sure the system is filled completely. cycle the cooling system 5 -6 times to make sure all air is purged from system or other issues will arise.

Feb 19, 2014 | 2005 Dodge Neon

1 Answer

How do i check the cooling fan my car is over heating


HOT WIRE COOLING FAN USING JUMPER WIRES TO BATTERY.IF FAN DONT RUN WHEN HOT WIRED FAN MOTOR BAD NEED REPLACING. IF FAN RUN WHEN HOT WIRED. CHECK COOLING FAN FUSE AND RELAY.IF ALL IS GOOD.YOUR ENGINE COOLANT TEMPERATURE SENSOR NOT WORKING.IT CONTROL COOLING FAN AT SET TEMPERATURE IF SENSOR OPEN OR FAULTY THE COOLING FAN WONT TURN ON.CHECK COOLING FAN WIRES FOR DAMAGE.IF ALL STILL CHECK OUT GOOD HAVE VECHICLE SCANNED FOR PCM FAULT.IF IT FAILS NO COOLING FAN WONT TURN ON.

Dec 13, 2010 | Hyundai Elantra Cars & Trucks

1 Answer

2001 Neon cutting out, but only in the heat of the day


SOUND LIKE ENGINE RUNNING HOT.MAKE SURE COOLING FAN TURNING ON. WHILE ENGINE IDLING WATCH TEMP GAUGE AS THE TEMP CLIMB COOLING FAN SUPPOSE TO TURN ON IF NOT.CHECK FAN FUSE AND RELAY. IF BOTH GOOD HOT WIRE IT. NO RUN REPLACE FAN MOTOR IF FAN MOTOR DO RUN. YOU COULD HAVE A FAULTY COOLANT TEMPERATURE SENSOR OR SHORT IN FAN CONNECTOR OR WIRES. CHECK COOLANT LEVEL.MAKE SURE YOU HAVE 50/50 MIXTURE OF WATER AND ANTIFREEZE.TO BE ON SAFE SIDE REPLACE THERMOSTAT AND PRESSURE CAP.

May 30, 2010 | 2001 Dodge Neon

1 Answer

The radiator fans aren't working on my 1995 oldsmobile, and it's running hot, is it fan motor or the heating sensor?


FIRST SCAN CAR TO SEE IF COOLANT TEMPERATURE SENSOR IS WORKING SEE IF YOU GETTING ECTS CODES. IF NOT CHECK THE COOLING FAN FUSE AND RELAY.IF BOTH GOOD HOTWIRE THE COOLING FAN USING JUMPER WIRES TO CAR BATTERY.IF FAN DONT WORK REPLACE THE COOLING FAN MOTOR ITS FAULTY.

May 05, 2010 | 1995 Oldsmobile Ninety Eight Regency

1 Answer

My cooling fans and blower have stopped working on '89 Ford probe turbo; all fuses are Ok.


Do you have the twin cooling fan set up?one is for the engine and the other is for the AC.these can be replace through the aftermarket parts stores. The blower for the heat/ac can be replaced. You can also test these units if your unplug them from the harness,and use jumper wires to supply power and ground.

Jul 24, 2009 | 1989 Ford Probe

1 Answer

98 Saturn SL AC/cooling fan will NOT work


Do not let this car over heat a blown head gasket will ensue. Locate and replace the fan relay, if that doesn't fix the problem unplug fan and use jumper wires to ground the plug then feed power to the positive side of plug to check fan, if that doesn't work replace the coolant temperature sensor located somewhere near the intake manifold or thermostat housing area.

Jul 01, 2009 | 1998 Saturn SL

2 Answers

2000 Caravan-Engine cooling fans not running, replaced temperature sensor and fan relay, still not working-HELP


Did you replace the sensor by the thermostat in the engine block or the one under the drivers headlight, There are two, the one next to the thermostat controls the temp gauge in the vehicle. the one under the headlight assembly controls the actual fans and is a electronic module. You have to remove the head light assembly to get to it.

Joe

May 29, 2009 | 2000 Dodge Caravan

1 Answer

Engine Over heating while cooling fan not responding to cooldown!


Sounds like the temp switch for the fan or the fan motor itself. To check run jumper wires from your batter directly to fan.. If it turns on, then you have a bad switch. If not , your fan motor is bad. I do not have a diagram for your car but finding wires from your fan assemble should be easy. Trace starting from fan. There should be a harness soon after the fan for you to connect jumper wires to to check fan. And by the way it does not matter witch way you hook the jumper wires up. It will only change the direction the fan motor turns. Just make sure you disconnect the harness so that you do not create a back flow of current.The reason for your coolant overflow to be getting excessive pressure is the heat in the system is causing boil over(the car is too hot).

Nov 16, 2008 | 2006 Fiat 124

3 Answers

Engine problems 1999 dodge neon sport 2.0 L 16 valve DOHC


if the cooling fans dont come on, it might need the fan relay replaced.
the relay is located on the frame rail right below the battery tray. the easiest way to accesss it is from underneath the car.

Jun 22, 2008 | 1999 Dodge Neon

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

316 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...