I am trying to change the starter on my 94 olds. Do I need special tools? I can't get to the second mounting bolt.
Since its right there at the front of the motor, you really only need a simple ratchet and appropriate sized socket or box wrench to get it loose, but you want to make sure that you label the wires as to remember which terminals they go on;if not reattached correctly, there will be electrical problems with gauges and overall car operations...
SOURCE: 94 Oldsmobile Cutlass Ciera- stalling issues.
Sounds crazy but, check for bad injector[s] Wadski
SOURCE: how to change a starter in a 1992 oldsmobile cutlass ciera
disconnect battery,three bolts hold it to bell housing and two wires ,one is the feed the other activates the solonoid Easy job to do but dirty dirt grease and muck
SOURCE: Where are the starter bolts located? 1994 Olds Ciera S w/v6
Should be between the radiator and engine, underneath the car. There might be a plastic cover held on with 10mm bolts. The starter bolts go up thru the starter, into the block.
320 views
Usually answered in minutes!
×