Question about 2000 GMC New Sierra 1500

1 Answer

I have a 2000 GMC Sierra and i went to the store , turned off and now all it does is spins over. There is no spark and all it does is spin. I replaced the Crank sensor behind the starter. My ECM 2 fuse was also blown. I replaced it. but it still just spins . It kills a battery in two or three tries. My battery was bad the auto parts store told me so I tried the battery out of my other truck and it killed it in three tries. What is really going on? Please help me I need that truck for work.

Posted by on

  • Daniel Simons
    Daniel Simons May 11, 2010

    are u getting fuel?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

You may check the starter motor. Sometimes they draw to much current from the battery and cause it to drain down to soon and not allow current to go anywhere else to start.

Posted on Feb 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2000 gmc Sierra 3/4 ton 4x4 k series I have no spark to my spark plugs I have changed the crank sensor an the ignition module not sure what else I can try I'm thinking maybe the ignition coil


Check to see if you are getting spark from the coil to the distributor. I suppose the engine is a 5.7 liter?If not getting spark to the cap, then check for power and ground pulse at the coil.If there is spark at the cap, replace the ignition rotor. If there is no power or ground pulse at the coil,check to see if the ignition rotor is spinning when the starter is engaged. If the distributor is not spinning while cranking the engine there are several more things you'll need to check,i.e.,distributor gear and pin as well as oil pump if the pin or gear are damaged.

Mar 05, 2015 | GMC Cars & Trucks

1 Answer

2000 Gmc sierra sle 1500 on the floor 4x4, 4x4 engages but nothing to the front wheels, the drive shaft spins, but still nothing, any suggestions?


Sounds like you need a front axle actuator. This actuator bolts to the side of the front differential housing. It is electrically engaged. You can purchase them online starting at about $40

Jun 03, 2012 | 2000 GMC Sierra

1 Answer

Plastic heater core hose connector broke. How do you replace it?


how to replace heater core connectors ona 2000 2500 gmc serria truck

Mar 27, 2012 | 2000 GMC Sierra

1 Answer

1995 GMC Sierra won't start! Just spins! Changed the fuel pump, fuel filter, Distributor cap and a few other things. What else could it be?


Does the car have spark? After replacing all these parts and no spark i would replace the ignition module located in the distributor

Apr 13, 2011 | 1995 GMC Sierra

1 Answer

97 gmc 2500 5.7l vortec, won't start, fuel pump works, tried using starting aid and nothing, hooked up a scan tool, and no errors came up, could it be the crank position sensor? or the distribution centre...


See if you have spark on at least two plug wires. If you do, but it is weak, you may just need a good tune up (plugs, wires, distributor cap, and distributor rotor). If you don't have spark or it is only on one wire, take the distributor cap off and see if the distributor is turning while someone turns the key. If it doesn't spin, you need a distributor because the bottom gear is broken or stripped. If it does spin, then it could be the coil, ignition module, crank sensor, fuse or wiring to any of these parts. It will take a lot of wire testing and diagnostics to figure out which part it is if it isn't just a simple tune up or distributor.
Hope this helps. Good luck!

Apr 12, 2011 | 1997 GMC Sierra

2 Answers

How do I turn the headlights off on my 2000 gmc Sierra where I can still drive?


They are called daytime runnig lights, doesn't you headlight switch have an "off" possition?

Jan 21, 2011 | 2000 GMC Sierra

1 Answer

Engine spins over, has gas, will not start


I would check for spark at the spark plug wire.

Oct 07, 2010 | 2002 GMC Sierra 2500HD

2 Answers

2002 gmc sierra truck won't start replaced filter


truck turns over for a few seconds then just spins

Jul 05, 2008 | 2002 GMC Sierra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

259 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

63291 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...