Question about 1999 Suzuki Grand Vitara

1 Answer

Replacement of headlight, reemoval of cover lense. Cannot see what has to be taken apart to get to these lots of brittle plastic money is real tight otherwise repair shop would be doing this. Thanks

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 580 Answers

Do you mean the entire headlight assembly or just the bulb?
If it's the entire headlamp look at the new one to see where the fastening points are, the grill may have to be removed and also the parking lamp lens, if it's just the bulb it's easy Open your hood look at the backof the headlight assembly and twist the bulb holder ring to release it. Good Luck To You

Posted on Jul 09, 2009

  • Patrick Razvoza Jul 09, 2009

    Do you mean the entire headlight assembly or just the bulb?

    If it's the entire headlamp look at the new one to see where the
    fastening points are, the grill may have to be removed and also the
    parking lamp lens, if it's just the bulb it's easy Open your hood look at the backof the headlight assembly and twist the bulb
    holder ring to release it. Good Luck To You


×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi I REMOVED THE COVER ON MY X5 BMW TO REPLACE THE PLUGS ALL THE PLUGS WHERE TIGHT BUT THERE IS A LOT OF OIL INSIDE WHAT CAN IT BE


the valve cover has round seals by each spark plug hole (tube) over time it becomes brittle then leaks. To replace valve cover must be removed

Aug 12, 2016 | 2005 BMW X5 4.4i

1 Answer

Low beam headlights on 2002 Mercury Couger are real dim


Are the lenses clear or are they yellowed? They make kits to clean the lenses (headlight covers) Compare your headlights to a new car - you should see the difference.

Dec 23, 2013 | Mercury Sable Cars & Trucks

1 Answer

2001 avalon plastic headlight covers


The headlights are a sealed assembly; the plastic covers cannot be removed for cleaning. Although there are several methods for "defogging" the plastic lenses, there is no long-term satisfactory solution short of replacement

Feb 18, 2013 | Cars & Trucks

1 Answer

How do you remove thr headlight assembly on a 1993 jeep grand cherokee


those headlights are held in with a ball and socket setup. they are desighned to pull straight forward. best to pry real gently. the plastic retainers get brittle with age. kinda like me. put grease in the cups before you reinstall. goes together alot easier that way and saves the steel pins from rusting more.if it is real stubburn to pry out you may have to remove the park/side marker lights. the ar held in with philips screws. hidden well though. between the bumper cover and light. between grill and light. side marker has a screw on top of support just under th hood. good luck

Mar 02, 2011 | 1993 Jeep Grand Cherokee

1 Answer

The headlight lenses are scratched and I want to replace them. How do I do that?


Your Camry doesnt have individual lenses but a headlight assembly. You will have to purchase the WHOLE assembly to replace just the plastic covers (what youa re calling lenses.) If its a lite scratching and haze you can get a lens polishing kit from 3M at your local part store. Follow the instructions to remove haze and light scratches yourself. If you do decide to replace the headlight assembly try Rockauto.com or partsgeek.com for best prices

Jun 28, 2010 | 2004 Toyota Camry

1 Answer

How to changing the headlight


Take screws off the front cover about 10-20 screws Reemove cover then two screws by the headlight Pull wole healight out, Repalce bulb. Not that hard. Read the manuel. My 16 year old did it with her Dad

Nov 29, 2008 | 2006 Kia Sedona

1 Answer

1989 honda accord


You have a switch on your console that locks the headlights up without giving them power. Use that switch to leave the up and there a a few screws that hold the plastic cover around the lights, just remove the cover and there a a couple more screws behold that cover that hold the headlight in place.. Should take about ten min to do both sides.. Any questions feel free to ask

Nov 12, 2008 | 1989 Honda Accord 4 Door

4 Answers

How do I replace xc90 headlight assembly?


its really easy. Open the hood, you will see two metal flat bars on the backside of each headlight, holding the headlight assembly on. Pull up on each of them.... remove headlight. Ta da.

Sep 19, 2008 | 2004 Volvo XC90

Not finding what you are looking for?
1999 Suzuki Grand Vitara Logo

831 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...