Question about 1998 Mercury Mountaineer

1 Answer

1997 mercury montaineer radio

When I turn my radio on in my truck I dont get any sound. The display shows the station and a set of headphones next to it. I dont know how to disable headphones and hear the speakers

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

Turn off the headphone switches located near the passenger seats. also make sure the headphones are all unplugged.

Posted on Dec 04, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to program the radio in a 96Lincoln continental after battery was disconnected


Hi,

Here is the link to the owners manual which you can download if you wish:

http://owner.ford.com/servlet/ContentServer?pagename=Owner/Page/OwnerGuidePage&year=1996&make=Lincoln&model=Continental

Here/below are the specific instructions on the radio programming (pg. 159 of above link).


Good luck & please flag if "HELPFUL". Thanks!

(from section) Luxury Audio System


Selecting the AM or FM frequency band

Push the "AM" or "FM1/FM2" button to select the desired frequency band. Pushing the "FM1/FM2" button more than once will alternate between FM1 and FM2. These functions are used with the station memory buttons described under How to tune radio stations.

HOW to tune radio stations

There are four ways for you to tune in a particular station. You can use the "TUNE", "SEEK", 'SCAN"or memory buttons.

• Using the "TUNE" function:
You can change the frequency up or down one increment at a time by Pressing and releasing either the left (< arrow/up) or - right (> arrow/down) side of the "TUNE" or "TUNE DISCS" button. To change frequencies quickly, press and hold down either the right or left side of the button.

Manual tuning adjusts your radio to any allowable broadcast frequency, whether or not a station is present on that frequency. (See All About Radio Frequencies in this section.)

• Using the "SEEK" function
: Press the right *) side of the "SEEK" button to select the next listenable station up the frequency band. Press the left (.4) side of the button to select the next listenable station down the frequency band. By holding the button down, listenable stations can be passed over to reach the desired station. Pressing the "SCAN" button will begin the scan mode up the frequency band, stopping on each listenable station for approximately five seconds. To stop the scan mode on the presently sampled station, press the "SCAN" button again.

Setting the station MEMORY PRESET buttons
: Your radio is equipped with 6 station memory buttons. These buttons can be used to select up to 6 preset AM stations and 12 FM stations (6 in FMI and 6 in FM2)

1. Select a band, then select a frequency.

2. Press one of the memory buttons and hold until the sound returns and the lamp above the memory button lights up. That
memory button is now set.

3. Follow the above steps for each memory preset button.

NOTE:
Custom memory presets can be recalled using the keyless entry system. See Memory Profile System in the Features chapter.

Using the Automatic Memory Store feature ("AUTOSET")
: If the memory buttons have been set, either by using the Auto Memory Load feature or if you have set them manually, the system is prepared tolet you use a convenient feature called Automatic Memory Store.

With Auto Memory Store, you can continually set strong stations into your memory buttons without losing your originally set stations. Your radio will automatically set your memory buttons to the strong local stations.

Activate Auto Memory Store by pushing the "AUTOSET" button once. Your radio will set the first six strong stations of the band you are in (AM, FMI or FM2) into the memory buttons. The display will flash "AUTO" and display the autoset icon "A" while the stations are being set in the memory buttons.

NOTE: If there are less than six strong stations in the frequency band, the remaining unfilled buttons will store the last strong station detected on the band. After all stations have been filled, the radio will begin playing the station stored on memory button 1.

To deactivate the Auto Memory Store mode and return to the manually-set memory button stations, simply push the "AUTOSET" button. Display will show "AUTO" then "OFF". The next time Auto Memory Store is activated on that band, the radio will store the next set of six strong stations.

Nov 23, 2014 | 1996 Lincoln Continental

1 Answer

Preseting radio stations so i don't have to use the tuning dial everytime


Most radios let you set them like this - select bandwidth FM/AM then tune to a favourite station, find the row of numbered buttons under digital display (usually 1 - 5) then press and hold button 1 for a few seconds, the station will be set to button 1, so to speak. Repeat tuning to another station then press button 2, etc...some radios have up to 15 slots per band. How many stations do you listen to....

To recall station 1, press button 1 ..button 2.......... Red.

Apr 05, 2014 | 1997 Isuzu Hombre

1 Answer

Cylinder_diagram_location_2002_mercury Montaineer V8 AWD


1,2,3,4, Passenger Side
5,6,7,8, Driver Side


1&5 are at the front of motor

Jan 23, 2013 | 2002 Mercury Mountaineer

1 Answer

Headphone for DVD on 2006 Chrysler Town and Country


Just found this and it worked! Hope it does for you as well:
There should be a button on the DVD remote control with a headphone symbol on it. Make sure the headphones are turned on(red indicator on earpiece) and push the headphone button on remote. The headphones will only work in the back seats of the vehicle. Once you have audio to the headphones, you should be able to hit the AM/FM button on the radio and listen to the radio while back passengers use the headphones for video.

Apr 04, 2012 | Cars & Trucks

1 Answer

I need a diagram of the firing order for a 1997 montaineer


For the 1997 Mercury Mountaineer V8 5.0L Engine:

Firing Order:
1-3-7-2-6-5-4-8

Cylinders:
.......(back)......
|..4..|........|..8..|
|..3..|........|..7..|
|..2..|........|..6..|
|..1..|........|..5..|
.......(front)

Ignition Coil Connections:
(back)........(back)
|.4..7.|........|.3..5.|
|.8..2.|........|.6..1.|
(front)........(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

May 01, 2010 | 1997 Mercury Mountaineer

1 Answer

The display on the factory dual media audio system does work.


older radios had a bulb you could replace, pre-1990

however, now the displays are true LCD and the radio will need replacing

Jun 23, 2009 | 1998 Mercury Mountaineer

1 Answer

Radio's display won't light up


The radios in the 2000 Mountaineer are notorious to short out. You simply have to get a new one. Believe me. I had the same problem.

Mar 15, 2009 | 2000 Mercury Mountaineer

1 Answer

How do I set my radio stations?


Manually turn to the station you are wanting and hold the number 1 button you wish that station to be on until it blinks and or makes a beep sound. then manually turn to the next station and hold down the number 2 button til the screen blinks again, and so forth.

Jan 12, 2009 | 2000 Jeep Cherokee

1 Answer

How to program 1995 900se saab radio


Tune to the first and lowest station on the band that you want and push and hold button number one (in the row of buttons immediately below the station display) until the number shows on the display and flashes. Pre-set one is now that station. Repeat, using button two for the next, and so on, until you have all the stations you want programmed.

Dec 30, 2008 | 1995 Saab 900

Not finding what you are looking for?
1998 Mercury Mountaineer Logo

Related Topics:

174 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Fordexpert

Level 3 Expert

5331 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...