Question about 1994 Mitsubishi Mirage

1 Answer

Tools what tools do i need to remove a water pump pulley and a balancer in a 1994 mitsubishi mirage coupe 1.5?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,605 Answers

You need a set of metric tools. 8mm, 10mm, 12mm, 14mm, regular, deep socket and open end.

Posted on Dec 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change time belt on 1995 mitsubishi mirage


You do not really need a manual to change the belts. All Mitsubishi cars pretty much hide the water pump under the timing belt. You should buy all new belts for the car and if you have 150,000+ miles consider replacing the water pump at the same time.
You will have to take off the power steering belt .
First , take off the negative battery cable so you do not blow an expensive fuse on the positive battery cable clamp. Facing the back of the car , reach UNDER the alternator and loosen the bolt on the bottom right side, now loosen the bolt on the adjuster block on top, you can now turn the adjuster bolt and move the alternator to change the belt.
To take off the steering pump belt on the front of the motor, you need to loosen the nut on the back side of the pulley it holds the adjuster pulley in place . With the adjuster pulley loose , you can use the adjuster bolt to move the pulley to adjust the steering pump belt.
Now take off the upper belt cover, support the motor, take off the motor mount, jack up the right front corner of the car, take off the front right tire, take off the engine plastic under cover.
Line up the TDC timing mark on the cover to the mark on the pulley, using an air wrench to loosen the center bolt take off the lower pulleys,
take off the lower engine cover, observe the timing marks/arrows and highlight with paint (crank marks and cam marks should all line up if not , rotate the crankshaft one full turn.), loosen the timing belt tensioner pulley ,take off the timing belt, counter balancer belt if there is one. Now you can unbolt the water pump, scrape the gasket, and replace it.
The good news is, if you have tools,a compressor, an air gun(for lower pulley bolt), patience , and four to eight hours to kill, you can actually save money and do it your self.

Oct 01, 2011 | 1995 Mitsubishi Mirage

1 Answer

How do i change the water pump which way does the pulley screw on the harmonic balancer turn in order to loosen the pulley?


You need a harmonic balancer puller to remove the harmonic balancer. Most auto parts stores that offer loaner tools will have one for you to use and they should have directions if you've never used one before. To replace a water pump, first drain your coolant, remove belt, unbolt and remove water pump, scrape old gasket material from block surface. Place your bolts into new pump, slide gaskets over bolts then attach to engine, reverse other steps, make sure to close radiator petcock (drain valve) fill with 50/50 coolant mixture and start your vehicle to make sure gaskets aren't leaking any coolant

Feb 02, 2011 | 1991 Honda Accord

1 Answer

Trying to remove the water pump on a 1994 mitsubishi mirage


All Mitsubishi cars pretty much hide the water pump under the timing belt. You should buy all new belts for the car and if you have 150,000+ miles consider replacing the water pump at the same time.
You will have to take off the power steering belt .
First , take off the negative battery cable so you do not blow an expensive fuse on the positive battery cable clamp. Facing the back of the car , reach UNDER the alternator and loosen the bolt on the bottom right side, now loosen the bolt on the adjuster block on top, you can now turn the adjuster bolt and move the alternator to change the belt.
To take off the steering pump belt on the front of the motor, you need to loosen the nut on the back side of the pulley it holds the adjuster pulley in place . With the adjuster pulley loose , you can use the adjuster bolt to move the pulley to adjust/take off the steering pump belt.
Now take off the upper belt cover, support the motor, take off the motor mount, jack up the right front corner of the car, take off the front right tire, take off the engine plastic under cover.
Line up the TDC timing mark on the cover to the mark on the pulley, take off the lower pulleys (use an air gun and impact socket),
take off the lower engine cover, observe the timing marks/arrows and highlight with paint (crank marks and cam marks should all line up if not , rotate the crankshaft one full turn.), loosen the timing belt tensioner pulley ,take off the timing belt, counter balancer belt if there is one. Now you can unbolt the water pump, scrape the gasket, and replace it.
The good news is, if you have tools,a compressor, an air gun(for lower pulley bolt), patience , and four to eight hours to kill, you can actually save money and do it your self.

Jan 15, 2011 | 1994 Mitsubishi Mirage

1 Answer

How to replace water pump in a 1992 mitsubishi galant


All Mitsubishi cars pretty much hide the water pump under the timing belt. You should buy all new belts for the car and consider replacing the water pump at the same time.You will have to take off the power steering belt, the alternator belt, the upper belt cover, support the motor, take off the motor mount, jack up the right front corner of the car, take off the front right tire, take off the engine plastic under cover, line up the TDC timing mark, Take off the front wheel ,take off the plastic splash cover, using an air wrench take off the lower pulleys, take off the lower engine cover, observe the timing marks/arrows and highlight with paint (on the crankshaft,counter balancer shaft , and cam shaft),take off the timing belt, counter balancer belt if there is one, water pump belt, and now you can unbolt the water pump, scrape the gasket, and replace it. Now the good news, if you have tools,a compressor, an air gun(for lower pulley bolt), patience , and four to eight hours to kill, you can actually do it your self.

Nov 12, 2010 | 1992 Mitsubishi Galant

1 Answer

How to change timing belt 2002 Mitsubishi mirage 1.5 standard trans


All Mitsubishi cars pretty much hide the water pump under the timing belt. You should buy all new belts for the car and consider replacing the water pump at the same time. You will have to take off the power steering belt, the alternator belt, the upper belt cover, support the motor, take off the motor mount, jack up the right front corner of the car, take off the front right tire, take off the engine plastic under cover, line up the tdc timing mark, take off the lower pulleys, take off the lower engine cover, take off the timing belt, counter balancer belt if there is one, water pump belt, and now you can unbolt the water pump, scrape the gasket, and replace it. Now the good news, if you have tools,a compressor, an air gun(for lower pulley bolt), patience , and four to eight hours to kill, you can actually save money and do it your self.

Sep 24, 2010 | Mitsubishi Mirage Cars & Trucks

1 Answer

Where is the water pump located on a mitsubishi galant exe 1994..? and whats the best way to remove and replace it..? cheers..


All Mitsubishi cars pretty much hide the water pump under the timing belt. You should buy all new belts for the car. You will have to take off the power steering belt, the alternator belt, the upper belt cover, support the motor, take off the motor mount, line up the tdc timing mark, take off the lower pulleys, take off the lower cover, take off the timing belt, counter balancer belt if there is one, water pump belt, and now you can unbolt the water pump, scrape the gasket, and replace it. Now the good news, if you have tools,a compressor, an air gun(for lower pulley bolt), patience , and four to eight hours to kill, you can actually save money and do it your self.

Sep 11, 2010 | 1994 Mitsubishi Galant

1 Answer

Where is the water pump located on a 1999 mitsubishi mirage?


The best bet is is for you to buy a Haynes manual for your car. Try autozone; generally available for around $20.

I am not familar with your specific car/ngine but I am familar with Lits in general. I believe your engine is tranvese mounted which means the fan belts are located on one end of the engine (left or right). The water pump is powered by a fan belt so go to the end with the fan belts. You should have an alternator, power steerring, air conditioning and crank shaft pulley that the belts run on. There should aslo be a pulley for the water pump. use the process of elimination to ID the water pump.

Feb 27, 2010 | 1999 Mitsubishi Mirage

1 Answer

HOW TO GET POWER STERRING PUMP OFF


yes you do. auto zone loan a tool pulley tool. pull off press on. good luck

Nov 23, 2008 | 1994 Mercury Cougar

2 Answers

Turn signal


first it is not call realy it is call flasher try to ask for the turn signal lights flasher
but most likelly is not going to be a flasher problem since the turn signal sw trigers the flasher.

May 31, 2008 | 1994 Mitsubishi Mirage

Not finding what you are looking for?
1994 Mitsubishi Mirage Logo

Related Topics:

174 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...