Question about Chrysler Voyager

1 Answer

My 1996 voyager chrysler minivan is having some problems. it will go dead when I come to a stop and some times when I take off from stop. When the tank is full this problem never happens only with a 1/4 or 1/2 tank of gas.

Posted by on

  • yadayada
    yadayada May 11, 2010

    Does the engine surge (RPM varies) before it stalls? does it restart right away? Have you had a computer trouble code test run? if so any codes present?


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert whose answer got voted for 20 times.

  • Expert
  • 115 Answers

It sounds to me like either the 'sock' (a type of filter) in the fuel tank or the pick up tube is blocked, (with a full tank,the gas is easier to pull into the fuel line), or your fuel pump is beginning to go. First though make sure that your fuel filter is not clogged. If it's OK I'd recommend a fuel pressure test to determine if the fuel pump is bad. Good Luck!

Posted on Dec 03, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:


Instrument panel goes dead

If the instrument panel on your Chrysler, Dodge, or Plymouth minivan goes dead intermittently, the problem is probably that the solder joints on the pins for the main connector have broken. You need to pull the instrument panel and resolder all the pins on the connector.

on Jan 05, 2014 | 1997 Plymouth Grand Voyager

1 Answer

Need diagram for juntion box

Thread: fuse box?? - The Chrysler Minivan Fan Club Forums

Jun 26, 2011 - 10 posts - ‎3 authors
Does anyone have a diagram for the fuse box (junction box) that is inside on the drivers side for a 1998 Town and Country. I need to know what the relays are for, my manual only shows the fuses and there is ... Forum · The Minivan Mopar Garage · 3rd Generation Chrysler Minivans: 1996-2000; fuse box?Missing: juntion

Interior Fuse Box Location: 1996-2000 Chrysler Town and ...
Interior Fuse Box Location: 1996-2000 Chrysler Town and Country ... box of your 2000Chrysler Town and Country in addition to the fuse panel diagram location. ... If youneed to replace a blown fuse in your Town and Country, make sure you ...Missing: juntion

Dec 21, 2015 | 1996 Chrysler Town & Country

2 Answers

How do you remove back seats from van

what is the year make model of the van?!?! then someone can google search for you

Apr 17, 2015 | Cars & Trucks

1 Answer

"1996 plymouth voyager timing belt" How do I know

get the engine number plus vin number and go to a Chrysler dealership. They can put the info in a computer and give you the correct answer. The SOHC Chrysler 2.4 is a "free-wheeling" engine.

Your drivers handbook should also, (i believe) have that information.

Good luck.

Feb 01, 2011 | 1996 Plymouth Voyager

1 Answer

Firing order

1988-1996 3.0L (182) 91446787

Apr 05, 2010 | Chrysler Voyager Cars & Trucks

2 Answers

Chrysler voyager electronic doors doors do not

a common problem with Chrysler/Dodge minivans .. when you open the sliding door you will see two flat brass contacts on the door frame and two spring loaded plungers that connect to the flat brass contacts when the door is closed .. this provides power to the rear door locks when the lock is accuated.. .. i thought the contacts would surely be plated with something but they are not ... if they were plated then you would have to be careful how you clean them . but as it is you can use steel wool or sand paper and a cleaning solvent like alcohol .. clean both contacts and plunger tips .. for reliable operation you have to keep those clean ... in later years they started putting a rolling loop of wire connecting the doors electronics to the cars lock control .. thats probably more reliable .. the danger in the dirty contacts is that you might not know your back doors are unlocked unless you look every time .. and i bet the theves know that also .. ..

Oct 16, 2009 | 2002 Chrysler Voyager

1 Answer

My air bag light came on and my cruise control and

your clockspring under steering wheel has failed..there is a recall from chrysler for 1996-2000 ns minivans..even if recall was done before,clockspring is under a lifetime your local dealer with your number,mileage and get it replaced

Jul 17, 2009 | 1999 Plymouth Grand Voyager

1 Answer

Rear View Mirrors Adjustment

The Chrysler voyager van you have has manual mirrors. If it would have power mirrors the controls would be mounted on the drivers side door or the dash panel beside the headlight switch.

May 28, 2008 | 2002 Chrysler Voyager

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

71525 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22059 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7029 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides