Question about 2001 Honda CR-V

1 Answer

Had tranmission fluid changed on handa crv, but it still seems to be dragging in second gear? can the tranmission be reset?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 109 Answers

Check charcoal canister..

Posted on Dec 04, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I changed my Tranmission fluid on my 1984 Chevy c10 and gasket,filter now I'm trying to figure how many Qts of transmission fluid do I put back in.


It depends on which transmission you have in the truck but between 3.5 litres and 4.7 litres. Pick up 4 or 5 litres, add 3 and check the fluid level. Go from there. Before you check the level run the truck through all the gears slowly down to 1 and back to Park. Leave it in each gear a few seconds. Top it up and repeat until it's full. Hope this helps.

Sep 28, 2011 | 1983 Chevrolet Silverado

1 Answer

My car drives fine when i shift to thired to fourth into fifth my motor runs and the tranmission seems to drag those gears could it be fluid manual or vacume hose


does it seem like the motor goes faster than the car if so than your clutch is slipping and in need of replacing,but if it feels like its holding you back then it could be the emergency brake is hanging up and slightly applied maybe the cable is frozen or something of that nature if so jack up car and spin wheels at rear to see if they are free wheeling, hope this helps you.

Jan 28, 2010 | 1994 Volkswagen Jetta

1 Answer

My tranmission works in reverse, Ist and second. Will not move in 3rd or OD. Tranmission hot light came on. Immediately shut off vehicle. Manual says transmission will return to normal shifting patterns...


sounds like your third and forth clutches are burnt up. one set of clutches powers both gears. transmission will most likely need to be overhauled

Dec 31, 2009 | 2005 Chevrolet Silverado

2 Answers

Car starts up shifts in all gears but wont move foward or reverse


The ring gear lined up with the torque converter,and is the trany full of fluid?

Jun 27, 2009 | 2000 Ford Explorer

1 Answer

Transmission hesitates shifting into second and perhaps third gear when driving slow. When acceleration is positive transmission shifts smoothly. Reference "99 Mercury Transmission" as Subject when


Several things could be causing your problem:
  1. Auto transmission fluid is low
  2. Auto transmission fluid needs changing; this is an area that gets neglected by a lot of people;check the fluid and if its brown or gives off a burning smell, it needs changing. Very old transmission fluid will cause slipping in the transmission; if this is the case, it should be changed along with the filter
Hope you find that this answers your question. Best of luck.
Greg

p.s. If you have the fluid changed, make sure it's done from the tranmission pan, not through the filler tube; siphoning through the filler tube can be hazardous to the transmission, especially cars with a lot of miles

May 30, 2009 | 1999 Mercury Grand Marquis

1 Answer

Tranmission wont shift until engine redlines.


the transmissino is slippin id try to replace autmatic clutch or check fluids

May 25, 2009 | 1993 GMC Suburban

Not finding what you are looking for?
2001 Honda CR-V Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...