Question about 2000 Hyundai Accent
Driver side seat belt won't retract. how do we gain access to the mechanism so we can see if it is twisted.
SOURCE: Adjusting the low beam headlight
its all the same the headlight is a complete unit you adjust both/ look for screws behind the headlight one each side one is for horizontal annd the other is for vertical Please rate my response thank you very much
Posted on Jan 31, 2009
The mechanism is located behind the plastic cover on the door side. You'll need to remove this trim piece to get at it. It's held on by screws. When you get to the mechanism it is held on by a torx bolt.
Posted on May 29, 2009
Most of the time this happens because the belt gets twisted behind the B pillar trim panel. The lower portion of the panel that the belt goes behind can be removed enough to see behind it by gently pulling outward, it is held in place with plastic clips. If the belt is twisted up in there, untwist it and snap the panel back in place.
Posted on Feb 07, 2010
Testimonial: "that was it. thanx!"
it can if you have the proper tools and a little patience its not very hard at all it may be a little snug i cant remember off hand where the starter is located on that car but its relatively an easy fix.
Posted on May 21, 2010
SOURCE: driver side seat belt won't
Citrifical swicth is bad you'll have to replace the unit. carparts.com and search the junk yards marshalls in circilleville ohio has great service and prices.
Posted on Feb 23, 2011
Tips for a great answer:
Jul 06, 2015 | 2009 Hyundai Elantra
Jan 05, 2013 | Nissan Cars & Trucks
Jun 03, 2011 | 1998 Saab 900
Feb 23, 2011 | 2000 Hyundai Accent
Dec 21, 2010 | 2006 Hyundai Elantra
Feb 06, 2010 | 2005 Hyundai Elantra
May 29, 2009 | 2001 Hyundai Elantra
Jan 17, 2009 | 1996 Toyota Corolla
441 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: