Question about 2000 Ford Focus

1 Answer

What gear oil do i use in a 2000 ford focus 1.8tdi manual, its the one that you lift up a trigger to select reverse? thanks

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 341 Answers

MERCON (R) Multi-Purpose Automatic Transmission Fluid XT-2-QDX

CAUTION:
Using a transmission fluid that indicates a dual usage MERCON and MERCON V in a transmission application requiring MERCON, may cause internal transmission damage. The use of any fluid other than the recommended fluid may cause transmission damage. Some fluid labels may indicate dual usage such as MERCON and MERCON V. These dual-usage fluids are not to be used in transmissions that use only the MERCON type fluid. These dual-usage fluids may be used in transmissions that require MERCON V use.

Posted on Dec 03, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can i adjust the gear linkeage on my 2000 ford focus it is hard to select reverse gear occasionally.5 speed manual


You may want to grease the fork sliders on the top plate. Check the nylon thickness on the forks for excessive wear. Check for excessive shaft end play between the gears and the case. Make sure the detentes on the fork sliders fully engage. The shift linkage arms have bushings so make sure there isn't excessive wear on the reverse arm .

Sep 15, 2016 | 2000 Ford Focus

1 Answer

2000 ford focus, manual, the stick stick flops around not engaged


There are three posibilities for this worn linkage on the gearbox the linkage under gear lever or a broken mounting on the bracket where the lever comes up through the floor as long as you can get all gears it will be exturnal linkage fault.

Mar 04, 2014 | 2000 Ford Focus

1 Answer

2008 ford focus manual trans no gears told shifter housing needs replaced


Same thing just happened to my 2008. I was driving to work and suddenly, no gears available (1-5 or reverse). Had it towed. Mechanic says linkage is connected and working. Has to drop the transmission. Minimum cost is $1,200.00!!!!!

Jul 31, 2012 | 2000 Ford Focus

1 Answer

Ford focus gear kinkage


Worn bushings, bent shift lever, Broken engine mount is a possibility

Dec 18, 2011 | 2003 Ford Focus

1 Answer

The. Manual trans in my 2000 ford focus wont ahift to first third or fifth gear but I have second and fourth and reverse this happened immediately after I changed the battery and got in it to drive the...


could be the selectors in gearbox
but i would check all gearlever linkage first that could be your problem . if not problem has to be selectors in lid of gear box

Feb 04, 2011 | 2000 Ford Focus

1 Answer

Went to select reverse and it will not drop in when engine running ..tried other gears and got the same problem...can select the gears when engine not running.....also pedal feels it has no resistance. ...


either clutch not clearing or the pressure plate has failed ,either way its gearbox out job as the slave cylinder is inside the bellhousing

Dec 06, 2010 | 2000 Ford Focus

1 Answer

My ford focus tdi 2003 cant select 1st,3rd or 5th gears.


Car is in limp in mode unless you have the tools to work on automatic transmission you will need to take it to a transmission shop. Of course you can check oil level but I suspect you have other issues.

Mar 26, 2010 | 2003 Ford Focus

1 Answer

Gearbox wont stay in reverse


strip and repair job is only soloution the selector is worn or the gear its self is cream crackered

Nov 19, 2008 | 2000 Ford Focus

2 Answers

How do I change the transmission oil in my Ford Focus 1.6 Zetec SE 16 value engine ?


  • drain oil using allen key plug underneath gearbox till all oil is drained refit use new seal if old 1 is damaged then look at front of g/box quater of the way up is another allen key plug remove fill with new oil till it starts to run out hole refit plug and ur done

Jul 09, 2008 | 2000 Ford Focus

Not finding what you are looking for?
2000 Ford Focus Logo

438 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...