Question about 2000 Chevrolet Lumina

1 Answer

1990 turn signal switch

Where is it located on the 1990 lumina and how to install got a ticket and have only 4 days to fix.....ye ha thanks

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

It was the turn signal switch thank you very... thank the apprentice for the expert knowledge

Posted on Dec 04, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you change turn signal lever on 1990 chevy lumina


The lever is part of the multifuntion switch located under the covers in the steering column. Disconnect the battery, remove the screws from the bottom cover [ has holes to access screws ], them it's held in with a couple screws. easy to change.

Feb 23, 2011 | 1990 Chevrolet Lumina

2 Answers

1990 buick lesabre turn signals don't work,hazard flashers work, bulbs are ok, running lights & brake lights work, just installed a new turn signal assembly, thought that would fix the problem, it did...


the turn signal flasher is a small canister-shaped or rectangular unit located under the dash, either in a clip adjacent to the steering column or in the convenience center which is located located under the right side of the dashboard and houses relays and other components. The fuse.faulty flasher unit a broken switch or a loose or open wire. We have eliminated the switch, I would check all fuses inside and out, you can replace the flasher with the hazard flasher as if I remember correctly they are the same shape and size, then it is just a matter with a tester light running it from the column to the sockets and finding the break. Hope this helps Tim

Oct 31, 2010 | 1990 Buick LeSabre

1 Answer

1999 chevy Lumina's break lights are not working, but the back window brake light does. We've changed the bulbs, and the wiring seemed to be intact. Any suggestions?


I have a solution for you and it is your turn signal switch. I replaced mine and all of the lights work now. It is a pain to put in since you have to take off the steering wheel to replace ti but it will work after that. The switch is less than sixty dollars but ti will save you from getting a ticket

Sep 03, 2010 | 1998 Chevrolet Lumina

1 Answer

Hi, My friend has a 1997 lumina and did not pass inspection due to her brake light but it has to do with the turning signal. Is there a website that has instructions how to replace or resolve the...


YEP TO FIX BRAKE LIGHTS YOU HAVE TO REPLACE TURN SIGNAL SWITCH BECAUSE MY 98 LUMINA DID THE SAME THING.YOUR BRAKE LIGHT SWITCH AND TURN SIGNAL SWITCH SHARE THE SAME ELECTRICAL CIRCUIT.

Aug 21, 2010 | 1997 Chevrolet Lumina

1 Answer

1966 mustang sequential turn/tail/brake lights/signals are ALIVE!


Recheck ALL the wiring, check the brake light switch and signal switch. Either on could have gone bad due to its age. Them suspect the controller for the lights. What do the 4 ways do? I think I would be suspecting the signal switch.

Aug 13, 2009 | 1966 Ford Mustang

1 Answer

I bought a new turn signal switch for a 95 lumina on line but has no instructions on installation.


ah go to oriely and rent a wheel puller pullsteering wheel and small snap ring follow inst in puller case tou will square cover and switch will bolt on with a couple screws let me know if you get stuck tell fixya bouy me ok

May 23, 2009 | 1995 Chevrolet Lumina

1 Answer

Turn signals not working on 91 lumina


Your description matches 'bad ground' pretty well.  To locate the grounds, I recommend you purchase a Haynes (1st choice) or Chilton service manual for your Lumina and keep it in your car. There will be many points at which various items are grounded.
Either of these manuals will have complete electrical diagrams and once you have familiarized yourself with the way they are presented, you will be able to locate any of your wiring.   Having the manuals will likely save you money far beyond their $20-$30 cost as you can try to assess problem areas before turning your car over for repairs and perhaps catch a dishonest service shop ripping you off.

Mar 21, 2009 | 1991 Chevrolet Lumina

1 Answer

Can't locate fuse box to replace turn signal flaser in 1990 Lumin


the flasher is not in the fuse box, It is located behind the instrument cluster to the right of the steering column.

Feb 10, 2009 | 1990 Chevrolet Lumina

1 Answer

96 chevy lumina sedan


for both issues, could possibly be the flasher unit for the blinkers.....which could be separate from the hazard flasher unit...(happened on my 92 chevy lumina) or the actual turn signal switch which is located in the steering column....not the stick you push, but the part inside that the lever controls (also happened on my lumina............3 times)

TIP:

start by checking the flasher....its cheap maybe 3-4$ for a new unit.....if thats not it and you figure out its the switch, go to a junkyard.....its wayyyy cheaper

Aug 04, 2008 | 1992 Chevrolet Lumina

2 Answers

I own a Chevrolet lumina two door year 1990.Why would I get smoke coming out of the steering column? Where you push to get the horn to operate it gets very warm. seems i had this trouble before but...


One problem I have had with smoke coming from the steering column is from the turn signal switch. The contacts get worn and for some reason it smokes and also gets hot!!!
Replace the turn signal switch and this should fix the problem.

Jul 17, 2008 | 1984 Chevrolet Camaro

Not finding what you are looking for?
2000 Chevrolet Lumina Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...