Question about 1987 Toyota Pickup

2 Answers

Clutch pedal has no push back

I would like to know what kind of clutch the truck has and what i could do to fix.........

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 314 Answers

Your truck has a hydraulic clutch. From the info, my guess is that the driver has been 'riding' the clutch a lot. The clutch will need to be replace to solve your prob. You may get a few more miles 'playing' with the adjustment, not reccomended. Frankster016

Posted on Dec 03, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 337 Answers

Http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c1528004d923




could have bad clutch master cylinder this link has info you can use.

Posted on Dec 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I can't depress the clutch pedal


Can't push clutch pedal in - JeepForum.com

www.jeepforum.com > ... > TJ Wrangler Technical Forum

Dec 11, 2010 - 7 posts - ‎3 authors
Driving home last night and the clutch pedal falls to the floor. ... Forums > TJWrangler Technical Forum > Can't push clutch pedal in ... Comes back up but then Ican't push it back in at all, even trying to stand on it, won't budge. Clutch locking up?
10 posts
Jul 30, 2011
Clutch Pedal Frozen Need tech help
10 posts
Sep 8, 2009
Clutch pedal stuck in the up position.
6 posts
Jul 26, 2009
Any more to clutch adjustment?
10 posts
Nov 28, 2008
More results from www.jeepforum.com

1998 Wrangler Sahara - Won't go into gear! Help please! - Jeep ...

www.wranglerforum.com/.../1998-wrangler-sahara-wont-go-into-gear-h...

Oct 5, 2010 - 22 posts - ‎7 authors
With the engine off, i can push the clutch in, and shift through all the gears ... to move - the clutch isn't disengaged even with the pedal fully depressed. .... Also, trying to bleed the system, can't find the bleeder screw. .... 1991 Jeep Wrangler Stuck In Gear? jeffasel, YJ Tech Forum, 5, 10-19-2010 09:42 AM. Getting difficult to push clutch pedal down, HELP
20 posts
Jun 17, 2011
How to bleed my clutch Be spacific.
11 posts
Feb 26, 2011
Clutch Problem?
30 posts
Jun 22, 2010
My Clutch Problems and How I Resolved Them
8 posts
Jan 28, 2009
More results from www.wranglerforum.com

Jan 13, 2016 | 1991 Jeep Wrangler

1 Answer

Clutch pedal


Probably a spring pulls it back and some kind of a stop keeps it from coming oll the way out or the linkage itself may hold it to it's highest position.When you depress it and then let it off the fingers in the pressure plate push the throw out bearing back which pushed the clutch back to it run position.

Mar 12, 2014 | 1999 Ford Super Duty F 550

1 Answer

Clutch pedal wont spring back,


If the clutch is good and works right, then probably the big spring on the clutch pedal under dash may have come loose or broke. You need to look at the pedal operation while you push and release. It's a bit of a job to work on the pedals. Not sure, but you may have to remove the pedal assembly to fix it. good luck.

Oct 26, 2011 | 1998 Honda Civic

1 Answer

Hey, i'm looking to buy a used 2003 volkswagon passat gls 2.8 v6 manuel, the clutch doesn't engage befor it's almost all the way out,i told the dealer but he says that the clutch is fine...


here's what you can do to fix your clutch.

1. if your clutch still uses clutch cable (there is a cable between the transmision and the clutch pedal), the you can adjust the clutch release by tightening/loosen the clutch pedal. adjustments can be done on the transmission side of the clutch cable.
2. hydrovac clutch with self correcting feature. just pull your clutch pedal for a few seconds and check if the clutch release changes.
3. hydrovac clutch without self correcting. between the clutch pedal and the clutch master, you can see a piece of metal rod that connects the 2. this metal is called push rod. there are screws/nuts at the clutch pedal to adjust this push rod. just adjust this screw to your prefered clutch release.

Aug 10, 2011 | 2001 Volkswagen Golf

1 Answer

1999 Saturn -We replaced the bushing but the car still will not start. The clutch pedal is down to the floor but nothing ! (It reminds me of when I didn't have the clutch pushed down all the way and tried...


Do not know what bushing you are talking about. If your clutch pedal is on the floor you have a failure in the clutch system, leaking master or slave cylinder or broken line; or a failure within the clutch.

Oct 12, 2010 | 1999 Saturn SL

2 Answers

Need to know what i'm missing.using '94 mustang t5 manual bolted to a 302 engine in my 1930 pickup hot rod.does the clutch fork push forward or pull back towards the cab.i don't seem to have a pivot point...


You didn't say which clutch you are using, so I will assume that it is a 94 Mustang clutch and housing. The pivot is on the right (passenger) side, so to disengage the clutch (disconnect engine from transmission, like pushing on clutch pedal), you would need to move the fork towards the front of the truck.

Aug 24, 2010 | Ford Mustang Cars & Trucks

1 Answer

I noticed there is threaded adjustment on the clutch pedal push rod going into the clutch's master cylinder hydraulic system. Is this one way I can adjust the hydraulic clutch on my 1998 suzuki sidekick...


Yes, if you need a little oomph out of the pedal, you can get a little more throw out of the adj rod, or you can get a little less, it doesn't take much to move a clutch. Depends on what the clutch is doing, chattering, slipping, grinding, not shifting. You know, that kind of stuff all gets different adj. Check it out.

Jul 07, 2010 | 1998 Suzuki Sidekick

1 Answer

1998 Saturn SC1 manuel stick is hard to shift into 1st & 2nd gear


Try to double clutch the clutch pedal. How to double clutch; push the clutch in moving the stick to neutral, then release the clutch and then push it back in and shift into first or second gear. If it works then it is not the shift linkage and could be a clutch adjustment. First how far do you have to release the clutch pedal until the clutch plate starts to engage? If only an inch or so the clutch pedal needs to be adjusted, which is an easy fix (this is more common). The other possible problems could be the clutch plate, throwout bearing of syncros could be bad. If it is one of the previous problems double clutching should buy you some time.

Jul 01, 2010 | 1998 Saturn SC

1 Answer

Need to know how to bleed clutch of 1995 honda passport. Do- it - yourself instructions. The clutch pedal is pushed down with no resistance at all. Once pushed down i can start the car but the clutch will...


Fill the clutch reservoir with new brake fluid and kneel down beside the car, reach in with your hand and pump the clutch pedal up and down until it starts to return on it's own. Check the reservoir level, hop in the car and pump the pedal about twenty times with you foot, the clutch will self bleed and you'll be able to shift. If there is a leak somewhere, this problem will reoccur until the cause of the leak is fixed.

Mar 30, 2009 | 1995 Honda Passport

2 Answers

Clutch check


you have civic SI type R with the K20A engine and 6sp transmission? correct?

yes the clutch is adjustable.

  1. loosen the clutch pedal position switch(lower of the 2 switches) locknut and back off the clutch pedal position switch.
  2. loosen the clutch push-rod locknut and turn the push-rod in or out to get the desired height and stroke of the pedal.
  3. tighten the push-rod locknut
  4. with the clutch pedal released, turn the clutch pedal position switch in until it contacts the clutch pedal.
  5. turn the clutch pedal position switch in an additional 3/4 to 1 turn.
  6. tighten the clutch pedal position switch locknut.
  7. loosen the clutch interlock switch(the upper switch) locknut and then the interlock switch.
  8. press the clutch pedal to the floor.
  9. release the pedal about 1/2 in. from the fully depressed position, and hold it there. adjust the position of the interlock switch so that the engine will start with the clutch pedal in this position.
  10. tighten the interlock switch locknut.
clutch pedal stroke should be: 5.1 - 5.5 in
clutch pedal height should be: 7.76 in

if adjusting the clutch doesn't help with the transmission feeling notchy, may be the syncros.




Jul 09, 2008 | 2002 Honda Civic

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

102 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...