- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
back left and right fail.? both? (from drivers and at correct door)
fronts dont'? fail?
try to say what all windows electric up and down don't do or do.
the full picture
do all other things on car work
drives ok, day and night.
From your description it sounds like the motor is drawing too many amps and a circuit breaker is opening (to protect the motor). That could be from one of two things: a failing motor or a bad set of gears or some other hindrance that is causing the motor to work too hard. Auto circuit breakers generally reset themselves after everything cools down. Since it happened on more than one window it could also be that the circuit breakers are getting old and less reliable meaning that they will continue to fail more often. The symptoms do not suggest a broken wire
drained out from where exactly.. a hose , the pump or what..sounds like a pressure valve is stuck and the fluid has no where to go..try to turn the steering wheel slightly side to side and se if the system will kick the valve open or what ..repost findings
it could be a bad driver door master switch or bad window motors, the best way to pin point the problem is to remove the door panel off every door that doesnt work and then test for power and ground while hitting the switch, if it has power and ground then motor is no good,start there, another option is to test for power and ground at the switches,
I am guessing you have power windows. Happens to mine sometimes. Slam the door a couple to few times, see if that doesn't put the window back on "track". I mentioned this to the dealership a while back and they were going to charge about $90 to pop off the interior part of the door and put it back on track. They said it "builds up dirt". I actually also toggle the window switch a few times to see if it will move slightly and then do my door slam thing a couple to few times. I seem to get this problem when it rains. I hope it helps.
the main switch that controls all the windows is on the drivers side it will allows the drivers window to work then allow your brain into thinking that its fine no its not always fine change it your problems will go away. its the master/main switch that is why the two back windows does not work, they does not always go bad at the same time.
It will be in the switch lift up the controls on both the drivers side and passenger side the wires going into the connection wiggle then and the button at the same time if you get any movement then you have a broken wire if not use a test light hook one wire to some metal and the other to the wires if their is any power the light will come on, if no light then you probably have a broken wire. The passenger side power comes from the drivers side control. When you open the doors you will see a large black set of wiring harness in the door going into the side under the dash that is the wiring harness for all the power windows and door locks, open it and test those wires for power.
The power window regulator and motor come as am assembly. Usually the cable snaps and the window drops down and won't come back up. About a $400 repair.
Remove the front window regulator.
Loosen the two hanger bolts.
Remove the front window regulator bolts and front top run channel bolt.
The same thing happened to my 1999 JMC Jimmy recently. I believe the problem is that your power window motor has most likely gone out or is starting to go out. The motor will need replaced. They are pretty expensive new. I went to a junkyard and got one for around 15 dollars. When mine went bad, I had rolled my window down about three or four inches and it stuck there. I took my door panel off and tapped on the motor while holding up on the window switch and got it to go up after a few minutes. I am replacing my motor today, I'll leave an update here about the outcome when I finish the job. I hope this information helps you.